Twelve weld overlay hardfacing alloys have been selected for preliminary erosion testing based on a literature review These alloys have been separated into three major groups: (1) Cobalt containing alloys, (2) Nickel-base alloys, (3) Iron base alloys. These alloys are being applied to carbon steel substrates and will undergo preliminary erosion testing to identify candidates weld overlay alloys for erosion control in CFB boilers. The candidate alloys selected from the preliminary erosion tests will then undergo more detailed evaluations in future research.

The European nuclear power industry is being restructured from an industry drawn along national lines to a European-wide industry. This, in part, reflects growth of the European Economic Community, but it also reflects changes in the international nuclear power industry. The objectives of the participants, beyond better integration of the nuclear industry in Western Europe, are to (1) obtain European leadership of the worldwide commercial nuclear power industry, (2) improve medium- and long-term safety of Eastern Europe and the former Soviet Union (FSU) power reactors, and (3) reduce domestic concerns about nuclear power. The activities to achieve these goals include (1) formation of Nuclear Power International (a joint venture of the German and French nuclear power plant vendors for design and construction of nuclear power plants), (2) formation of a utility group to forge agreement throughout Europe on what the requirements are for the next generation of nuclear power plants, and (3) agreement by regulators in multiple European countries to harmonize regulations. This is to be achieved before the end of the decade. These changes would allow a single design of nuclear power plant to be built anywhere in Europe. The creation of European-wide rules (utility requirements, engineering standards, and …

These notes give an overview of some aspects of the quantum theory of light and its interaction with matter. A description is given of basic emission and absorption processes, as well as the theory of photodetection and optical coherence. Basic research in this area is increasingly relevant to areas of technological importance, including microlaser devices and the noise characteristics of semiconductor lasers.

This project is a step in the Department of Energy's program to show that ultra-clean fuel can be produced from selected coals and that the fuel will be a cost-effective replacement for oil and natural gas now fueling boilers in this country. The replacement of premium fossil fuels with coal can only be realized if retrofit costs are kept to a minimum and retrofit boiler emissions meet national goals for clean air. These concerns establish the specifications for maximum ash and sulfur levels and combustion properties of the ultra-clean coal. The primary objective is to develop the design base for prototype commercial advanced fine coal cleaning facilities capable of producing ultra-clean coals suitable for conversion to coal-water slurry fuel. The fine coal cleaning technologies are advanced column flotation and selective agglomeration. A secondary objective is to develop the design base for near-term commercial integration of advanced fine coal cleaning technologies in new or existing coal preparation plants for economically and efficiently processing minus 28-mesh coal fines. A third objective is to determine the distribution of toxic trace elements between clean coal and refuse when applying the advance column flotation and selective agglomeration technologies. The project team consists of Amax Research …

The objective of this study was to make a more refined evaluation of the Anderson Quin Cycle based on most recent information on the performance of various elements that will be used in the Anderson Quin Cycle. My original estimate of the work plan for evaluating and optimizing the Anderson Quin Cycle called for 7000 man hours of work. Since this grant was limited to 2150 man hours, we could not expect to achieve all the objectives within the allotted period of work. However, the most relevant program objectives have been completed as reported here. The analysis generally confirms the results originally estimated in my paper on the subject. (Ref. 2) Further optimizations should show even higher efficiencies. The Anderson Quin Cycle (US Patent applied for) basically consists of 5 elements in the power cycle: A refrigeration system to cool and clean the inlet air before it enters the compressor that supplies air for the gas turbine; a gas turbine consisting of a compressor, combustor, and turbine; a steam boiler and steam turbine system using the heat from the exhaust gas out of the gas turbine; a vapor turbine cycle, which utilizes the condensed heat from the exhaust of the …

In this research program, a laboratory test facility was built for the purpose of testing a gas-fired water heating appliance. This test facility can be used to examine the important performance characteristics of efficiency, dynamic response, and quality of combustion. An innovative design for a tankless water heater was built and then tested to determine its performance characteristics. This unit was tested over a 5:1 range in input (20,000 to 100,000 btuh heat input). The unit was then configured as a circulating hot water boiler, and a specially designed heat exchanger was used with it to generate domestic hot water. This unit was also tested, and was found to offer performance advantages with regard to low flow and temperature stability.

The objectives for this research were two-fold: To identify means of using measurements of the outgoing radiation stream from earth to identify mechanisms of climate change; and to develop a flexible radiation code based upon the correlated-k method to enable rapid and accurate calculations of the outgoing radiation. The intended products are three papers and a radiation code. The three papers are to be on Entropy fluxes and the dissipation of the climate system, Radiation fingerprints of climate change, and A rapid correlated-k code.

A summary of large-scale cyclic static tests of structural clay tile infilled frames is given. In-plane racking tests examined the effects of varying frame stiffness, varying infill size, infill offset from frame centerline, and single and double wythe infill construction. Out-of-plane tests examined infilled frame response to inertial loadings and inter-story drift loadings. Sequential in-plane and out-of-plane loadings were performed to determine the effects of orthogonal damage and degradation on both strength and stiffness. A combined out-of-plane inertial and in-plane racking test was conducted to investigate the interaction of multi-directional loading. To determine constitutive properties of the infills, prism compression, mortar compression and various unit tile tests were performed.

This project is a step in the Department of Energy`s program to show that ultra-clean fuel can be produced from selected coals and that the fuel will be a cost-effective replacement for oil and natural gas now fueling boilers in this country. The replacement of premium fossil fuels with coal can only be realized if retrofit costs are kept to a minimum and retrofit boiler emissions meet national goals for clean air. These concerns establish the specifications for maximum ash and sulfur levels and combustion properties of the ultra-clean coal. The primary objective is to develop the design base for prototype commercial advanced fine coal cleaning facilities capable of producing ultra-clean coals suitable for conversion to coal-water slurry fuel. The fine coal cleaning technologies are advanced column flotation and selective agglomeration. A secondary objective is to develop the design base for near-term commercial integration of advanced fine coal cleaning technologies in new or existing coal preparation plants for economically and efficiently processing minus 28-mesh coal fines. A third objective is to determine the distribution of toxic trace elements between clean coal and refuse when applying the advance column flotation and selective agglomeration technologies. The project team consists of Amax Research …

In this research program, a laboratory test facility was built for the purpose of testing a gas-fired water heating appliance. This test facility can be used to examine the important performance characteristics of efficiency, dynamic response, and quality of combustion. An innovative design for a tankless water heater was built and then tested to determine its performance characteristics. This unit was tested over a 5:1 range in input (20,000 to 100,000 btuh heat input). The unit was then configured as a circulating hot water boiler, and a specially designed heat exchanger was used with it to generate domestic hot water. This unit was also tested, and was found to offer performance advantages with regard to low flow and temperature stability.

The European nuclear power industry is being restructured from an industry drawn along national lines to a European-wide industry. This, in part, reflects growth of the European Economic Community, but it also reflects changes in the international nuclear power industry. The objectives of the participants, beyond better integration of the nuclear industry in Western Europe, are to (1) obtain European leadership of the worldwide commercial nuclear power industry, (2) improve medium- and long-term safety of Eastern Europe and the former Soviet Union (FSU) power reactors, and (3) reduce domestic concerns about nuclear power. The activities to achieve these goals include (1) formation of Nuclear Power International (a joint venture of the German and French nuclear power plant vendors for design and construction of nuclear power plants), (2) formation of a utility group to forge agreement throughout Europe on what the requirements are for the next generation of nuclear power plants, and (3) agreement by regulators in multiple European countries to harmonize regulations. This is to be achieved before the end of the decade. These changes would allow a single design of nuclear power plant to be built anywhere in Europe. The creation of European-wide rules (utility requirements, engineering standards, and …

A class of turbulent combustion models known as PDF methods has been developed. These methods have the important virtue that both convection and reaction can be treated without turbulence-modelling assumptions. However, a mixing model is required to account for the effects of molecular diffusion. Currently, the available mixing models are known to have some significant defects. Motivation of the project is to seek a better understanding of molecular diffusion in turbulent reactive flows; and thereby to provide guidance to the development of improved mixing models. Principal approach taken in the research is to use Direct Numerical Simulations (DNS) to study the coupled processes of reaction and molecular mixing in turbulent combustion. Because of inevitable computational limitations, it is impossible to simulate turbulent combustion in the parameter range of practical interest. Instead, our approach is to study very simple turbulent reactive flows that contain qualitatively some of the same phenomena as real flames. Statistical models will be developed that are applicable to practical combustion devices. The DNS studies related to non-premixed combustion are described. An additional topic studied, was mixing from the viewpoint of relative molecular motion.

This paper is divided into three roughly independent sections. The first is a historical review of the twenty year history of experimental ion heat transport measurements from many tokamaks. The second is a study of ion heat transport in Ohmic TFTR plasmas which shows that {chi}i {approximately} {chi}e {approx} 15{chi}i{sup neo}. Thus, ion heat transport is demonstrated to be strongly anomalous even the absence of auxiliary heating. The third section describes the variation of {chi}i with local ion temperature in TFTR during auxiliary heating, with emphasis on characterizing the differecens between transport in the L-mode and supershot regimes. The results are consistent with the conjecture that improved ion energy confinement in supershot plasmas is caused by a high ratio of T{sub 1}/T{sub e}.

The {open_quotes}recirculator,{close_quotes} a recirculating heavy-ion accelerator has been identified as a promising approach for an inertial fusion driver. System studies have been conducted to evaluate the recirculator on the basis of feasibility and cost. The recirculator has been shown to have significant cost advantages over other potential driver schemes, but some of the performance requirements exceed the capabilities of present technology. The system studies identified the high leverage areas where advances in technology will significantly impact the cost and performance of a recirculator. One of the high leverage areas is the modulator system which generates the acceleration potentials in the induction cells. The modulator system must be capable of generating the acceleration potentials at peak repetition rates in excess of 100 kHz with variable pulse widths. LLNL is developing a modulator technology capable of driving induction cells using the latest in solid state MOSFET technology. A small scale modulator has been built and tested to prove the concept and the next version is presently being designed. The objective is to demonstrate a modulator operating at 5 kV, 1 kA, with 0.2--1 {mu}s pulse widths while driving an induction cell at >100 kHz within the next year. This paper describes the …

Twelve weld overlay hardfacing alloys have been selected for preliminary erosion testing based on a literature review These alloys have been separated into three major groups: (1) Cobalt containing alloys, (2) Nickel-base alloys, (3) Iron base alloys. These alloys are being applied to carbon steel substrates and will undergo preliminary erosion testing to identify candidates weld overlay alloys for erosion control in CFB boilers. The candidate alloys selected from the preliminary erosion tests will then undergo more detailed evaluations in future research.

This paper gives an update on the continuing work on the Malicious Code Testbed (MCT). The MCT is a semi-automated tool, operating in a simulated, cleanroom environment, that is capable of detecting many types of malicious code, such as viruses, Trojan horses, and time/logic bombs. The MCT allows security analysts to check a program before installation, thereby avoiding any damage a malicious program might inflict.

Binary alloys were investigated. Segregation to and thermodynamics of twist grain boundaries in Cu-Ni were studied. Segregation to and order-disorder phase transitions at grain boundaries in ordered Ni{sub 3{minus}x}Al{sub 1+x} were also investigated. Order-disorder transitions at and segregation to the (001), (011), and (111) surfaces in Pd-Cu, Pd-Ag, and Pd-Au alloys were investigated. The (001) surface in Cu-rich alloys undergoes a surface phase transition from disordered to ordered surface phase upon cooling from high temperature, similar to the (001) surface transition in Ni-rich Pt-Ni alloys. Segregation and ordering appear to be correlated. The free energy minimization method was also used to calculate the heat of formation and lattice parameter of Ag-Cu metastable phases. Results of free energy minimization for free energy and entropy of Si agree with experiment and quasiharmonic calculations.

Testimony was submitted to the Senate on the environmental impacts of accelerated research and development of hydrogen-based energy systems. The advantages of hydrogen in transportation systems, in fuel cells for electric vehicles and power plants, and in energy storage from off-peak electricity production were described. The largest barrier to using hydrogen in the transportation sector is the on-board storage of enough fuel to provide an adequate driving range in an urban environment. Production methods and costs were also discussed. The authors believe a coordinated demonstration program with US industry is needed to develop the best technologies for hydrogen-fueled vehicles.

Compliance with environmental regulations and US Department of Energy Orders (DOE) relating to environmental protection is an important part of SRS`s program. Over the past few years, the number of environmental regulations has increased. The strategy to comply with new and existing environmental regulations and DOE orders is described in chapter two. In this chapter, the following environmental programs are described: Toxic Substances Control Act (TSCA); Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA); Emergency Planning and Community Right-to-Know Act (EPCRA); and SPCC/BMP/Pollution Prevention Plans;The implementation section identifies issues and those responsible to achieve defined objectives.

This document contains the draft meeting minutes of the Steering Group of the Interagency Advanced Power Group. Included are the discussions resulting from the presentation of working group reports and the results of a discussion of IAPG policies and procedures. In the appendix are the reports of the following working groups: Electrical, Mechanical, Solar, and Systems.

The objective of this study was to make a more refined evaluation of the Anderson Quin Cycle based on most recent information on the performance of various elements that will be used in the Anderson Quin Cycle. My original estimate of the work plan for evaluating and optimizing the Anderson Quin Cycle called for 7000 man hours of work. Since this grant was limited to 2150 man hours, we could not expect to achieve all the objectives within the allotted period of work. However, the most relevant program objectives have been completed as reported here. The analysis generally confirms the results originally estimated in my paper on the subject. (Ref. 2) Further optimizations should show even higher efficiencies. The Anderson Quin Cycle (US Patent applied for) basically consists of 5 elements in the power cycle: A refrigeration system to cool and clean the inlet air before it enters the compressor that supplies air for the gas turbine; a gas turbine consisting of a compressor, combustor, and turbine; a steam boiler and steam turbine system using the heat from the exhaust gas out of the gas turbine; a vapor turbine cycle, which utilizes the condensed heat from the exhaust of the …

This report discusses and summarize the role of heating and non-inductive current drive in ITER as: (1) ITER must have heating power sufficient for ignition. (2) The heating system must be capable of current drive. (3) Steady-state operation is an ``ultimate goal.`` It is recognized that additional heating and current drive power (beyond what is initially installed on ITER) may be required. (4) The ``Ultimate goal of steady-state operation`` means steady-state with Q{sub CD} {ge} 5. Unlike the ``Terms of Reference`` for the ITER CDA, the ``ITER Technical Objectives and Approaches`` for the EDA sets no goal for the neutron wall load during steady-state operation. (5) In addition to bulk current drive, the ITER heating and current drive system should be used for current profile control and for burn control.

These notes give an overview of some aspects of the quantum theory of light and its interaction with matter. A description is given of basic emission and absorption processes, as well as the theory of photodetection and optical coherence. Basic research in this area is increasingly relevant to areas of technological importance, including microlaser devices and the noise characteristics of semiconductor lasers.

A common problem in shield design is determining the neutron flux that streams through ducts in shields and also that penetrates the shield after having traveled partway down the duct. Obviously the determination of the neutrons that stream down the duct can be computed in a straightforward manner using Monte Carlo techniques. On the other hand those neutrons that must penetrate a significant portion of the shield are more easily handled using discrete ordinates methods. A hybrid discrete ordinates/Monte Carlo cods, TWODANT/MC, which is an extension of the existing discrete ordinates code TWODANT, has been developed at Los Alamos to allow the efficient, accurate treatment of both streaming and deep penetration problems in a single calculation. In this paper we provide examples of the application of TWODANT/MC to typical geometries that are encountered in shield design and compare the results with those obtained using the Los Alamos Monte Carlo code MCNP{sup 3}.