The experiments we have been performing are primarily designed to define the extent to which water affects key properties of ashes, powders, and mixtures of sorbents and ashes. We have included selected data from prior quarterly reports in this report for the sake of completeness, and for comparisons with newly-acquired data. In several places in this report samples are referred to by their identification (SID) numbers. Table I provides a brief description of all the samples we have used in this project along with their SID numbers. As suggested by our literature review, our data indicate that water adsorption depends on particle morphology and surface chemistry. Our recent laboratory efforts were primarily directed toward the determination of the effects of adsorbed water on the tensile and cohesive strengths of powders, the development of apparatus for SO{sub 3} and organosiloxane conditioning, and the conditioning of powders and ashes with organosiloxane.

An MHD workshop entitled ``Stabilization of the External Kink and Other MHD Issues`` was held June 1993. This is a summary report of activities at that workshop, structured to respond to the three questions in the charge (letter from J. Willis). The experimental and theoretical status of these issues, and the R&D needs in each area, are addressed. We discuss the potential impact on the TPX and ITER programs of these issues. The workshop participants came from a broad and diverse range of institutions in the fusion program, including international participants. As a result, we believe the summary here reflects some consensus of the community on these very important program issues, and that the TPX and ITER programs will benefit from these discussions. The title of the workshop was chosen to indicate both our knowledge and our uncertainty of MHD phenomena limiting {beta} and causing disruptions in tokamaks. The purpose was to bring together theorists and experimentalist in order to assess our current understanding of the external kink instability at high {beta}, and to assess the potential for passive or active stabilization of the dominant modes. We also outlined the R&D needed for TPX and other future devices. Not only …

Poroelasticity is the theoretical framework used to describe the coupled processes which occur when a fluid bearing porous material is deformed by a stress field. The theoretical basis for the treatment of problems in poroelasticity has been derived in an extensive body of work over the last fifty years, most notably by Biot. Many of Biot`s successors have attempted to find relationships between the physical properties of the material to be analyzed and the Biot coefficients. Our approach to this problem has both theoretical and experimental components. The general theoretical objective is to produce estimates of the Biot coefficients which are more realistic e.g.. are not limited by assumptions which preclude their use for real earth materials. Experiments are designed to measure the coefficients (or parameters which are directly related to them) which have not been measured as yet to provide new insight for improving the theory of poroelasticity. The experimental program is designed to determine the mechanical and transport properties of a well characterized set of synthetic and natural sandstones from static to ultrasonic frequencies.

During this quarter some experiments from the previous set were repeated to check the reproducibility of the results. Also, a new set of experiments was carried out to study the effects of (1) collector dosage, (2) Q* -- the nondimensional ratio of air flow rate to slurry flow rate, and (3) slurry pressure on the flow characteristics. Four different Q* values with hydrophobic particles in the feed slurry were studied. The value of A*, the dimensionless ratio of overflow opening area to underflow opening area, was maintained at the same level (A* 1.00). Quartz particles of size {sup {minus}}100 {sup +}200 mesh were used for this study rather than coal particles because they did not abrade and were of a higher density. The reagents used were 40 ppM (water basis) of MIBC frother and 800 g of dodecyl amine collector per ton of dry solids in the suspension. In other experiments with no solids in the feed suspension, collector level in the water was varied at 0, 10 and 20 ppM. At room temperature, quartz is intrinsically hydrophilic while addition of the amine collector renders the quartz particles hydrophobic. The absence of collector will be referred to as the hydrophilic …

The Electric Power Monthly (EPM) presents monthly electricity statistics. The purpose of this publication is to provide energy decisionmakers with accurate and timely information that may be used in forming various perspectives on electric issues that lie ahead. The EPM is prepared by the Survey Management Division; Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), Department of Energy. This publication provides monthly statistics at the US, Census division, and State levels for net generation, fossil fuel consumption and stocks, quantity and quality of fossil fuels, cost of fossil fuels, electricity sales, revenue, and average revenue per kilowatthour of electricity sold. Data on net generation, fuel consumption, fuel stocks, quantity and cost of fossil fuels are also displayed for the North American Electric Reliability Council (NERC) regions.

Heat loading analysis of the Solid Waste Disposal Facility (SWDF) waste storage configurations show the containers may exceed 90{degrees}C without any radioactive decay heat contribution. Contamination containment is primarily controlled in TRU waste packaging by using multiple bag layers of polyvinyl chloride and polyethylene. Since literature values indicate that these thermoplastic materials can begin mechanical degradation at 66{degrees}C, there was concern that the containment layers could be breached by heating. To better define the mechanical degradation temperature limits for the materials, a series of heating tests were conducted over a fifteen and thirty minute time interval. Samples of a low-density polyethylene (LDPE) bag, a high-density polyethylene (HDPE) high efficiency particulate air filter (HEPA) container, PVC bag and sealing tape were heated in a convection oven to temperatures ranging from 90 to 185{degrees}C. The following temperature limits are recommended for each of the tested materials: (1) low-density polyethylene -- 110{degrees}C; (2) polyvinyl chloride -- 130{degrees}C; (3) high-density polyethylene -- 140{degrees}C; (4) sealing tape -- 140{degrees}C. Testing with LDPE and PVC at temperatures ranging from 110 to 130{degrees}C for 60 and 120 minutes also showed no observable differences between the samples exposed at 15 and 30 minute intervals. Although these observed temperature …

The United States is emerging from the Cold War era into an exciting, but challenging future. Improving the economic competitiveness of our Nation is essential both for improving the quality of life in the United States and maintaining a strong national security. The research and technical skills used to maintain a leading edge in defense and energy now should be used to help meet the challenge of maintaining, regaining, and establishing US leadership in industrial technologies. Companies recognize that success in the world marketplace depends on products that are at the leading edge of technology, with competitive cost, quality, and performance. Los Alamos National Laboratory and its Industrial Partnership Center (IPC) has the strategic goal to make a strong contribution to the nation`s economic competitiveness by leveraging the government`s investment at the Laboratory: personnel, infrastructure, and technological expertise.

For non-reactor nuclear facilities, the U.S. Department of Energy (DOE) does not require that nuclear criticality safety engineers demonstrate qualification for their job. It is likely, however, that more formalism will be required in the future. Current DOE requirements for those positions which do have to demonstrate qualification indicate that qualification should be achieved by using a systematic approach such as performance based training (PBT). Assuming that PBT would be an acceptable mechanism for nuclear criticality safety engineer training in a more formal environment, a site-specific analysis of the nuclear criticality safety engineer job was performed. Based on this analysis, classes are being developed and delivered to a target audience of newer nuclear criticality safety engineers. Because current interest is in developing training for selected aspects of the nuclear criticality safety engineer job, the analysis is incompletely developed in some areas.

By a memorandum dated September 16, 1992, Office of Federal Procurement Policy OFPP requested that the DOE, Office of Inspector General, conduct a ``special`` audit of the nature and adequacy of DOE`s FFRDC sole-source renegotiation justifications developed since 1985. The OFPP request was based on a July 8, 1992 Senate Subcommittee on Oversight of Government Management report entitled ``Inadequate Federal Oversight of Federally Funded Research and Development Centers,`` which detailed the need for strengthened federal controls over FFRDCs. The Office of Inspector General initiated an inspection in order to review and describe the Department`s history of designating its research laboratories as FFRDCs, and to review the Department`s compliance with the OFPP policy and procedures for establishing and renewing its FFRDCs. We also reviewed DOE`s sole-source renegotiation justifications to non-competitively extend its M&O contractors that manage DOE`s FFRDCs since September 30, 1984.

Timely disposal of the weapons plutonium is of paramount importance to permanently safeguarding this material. GE`s 1300 MWe Advanced Boiling Water Reactor (ABWR) has been designed to utilize fill] core loading of mixed uranium-plutonium oxide fuel. Because of its large core size, a single ABWR reactor is capable of disposing 100 metric tons of plutonium within 15 years of project inception in the spiking mode. The same amount of material could be disposed of in 25 years after the start of the project as spent fuel, again using a single reactor, while operating at 75 percent capacity factor. In either case, the design permits reuse of the stored spent fuel assemblies for electrical energy generation for the remaining life of the plant for another 40 years. Up to 40 percent of the initial plutonium can also be completely destroyed using ABWRS, without reprocessing, either by utilizing six ABWRs over 25 years or by expanding the disposition time to 60 years, the design life of the plants and using two ABWRS. More complete destruction would require the development and testing of a plutonium-base fuel with a non-fertile matrix for an ABWR or use of an Advanced Liquid Metal Reactor (ALMR). The …

Pulses of 140 GHz microwaves have been produced at a 2 kHz rate using the ETA-III induction linac and IMP wiggler. The accelerator was run in bursts of up to 50 pulses at 6 MeV and greater than 2 kA peak current. A feedback timing control system was used to synchronize acceleration voltage pulses with the electron beam, resulting in sufficient reduction of the corkscrew and energy sweep for efficient FEL operation. Peak microwave power for short bursts was in the range 0.5--1.1 GW, which is comparable to the single-pulse peak power of 0.75--2 GW. FEL bursts of more than 25 pulses were obtained.

The elevation of the surficial sediment/basalt contact at the Subsurface Disposal Area (SDA), within the Radioactive Waste Management Complex (RWMC) is presented to provide a data base for future remedial actions at this site. About 1,300 elevation data from published and unpublished reports, maps, and surveyors notes were compiled to generate maps and cross-sections of the surficial sediment/basalt contact. In general, an east to west trending depression exists in the south central portion of the SDA with basalt closer to land surface on the northern and southern boundaries of the SDA. The lowest elevation of the surficial sediment/basalt contact is 4,979 ft and the greatest is land surface at 5,012 ft. The median elevation of the sediment/basalt interface is 4,994 ft. The median depth to basalt in the SDA is 16 ft if land surface elevation is assumed to be 5,010 ft. The depth from land surface to the sediment/basalt interface ranges from 24 ft in the southeast corner of the SDA to less than 3 ft at the north-central boundary of the SDA.

Triangulations without large angles have a number of applications in numerical analysis and computer graphics. In particular, the convergence of a finite element calculation depends on the largest angle of the triangulation. Also, the running time of a finite element calculation is dependent on the triangulation size, so having a triangulation with few Steiner points is also important. Bern, Dobkin and Eppstein pose as an open problem the existence of an algorithm to triangulate a planar straight-line graph (PSLG) without large angles using a polynomial number of Steiner points. We solve this problem by showing that any PSLG with {upsilon} vertices can be triangulated with no angle larger than 7{pi}/8 by adding O({upsilon}{sup 2}log {upsilon}) Steiner points in O({upsilon}{sup 2} log{sup 2} {upsilon}) time. We first triangulate the PSLG with an arbitrary constrained triangulation and then refine that triangulation by adding additional vertices and edges. Some PSLGs require {Omega}({upsilon}{sup 2}) Steiner points in any triangulation achieving any largest angle bound less than {pi}. Hence the number of Steiner points added by our algorithm is within a log {upsilon} factor of worst case optimal. We note that our refinement algorithm works on arbitrary triangulations: Given any triangulation, we show how to …

The measurement capabilities to be developed include new apparatus for transport properties, thermodynamic properties, phase equilibria, and dielectric properties. Specific capabilities are: Thermal conductivity apparatus, vibrating wire viscometer, dual-sinker densimeter, high-temperature vibrating tube densimeter, dynamic phase equilibria apparatus, apparatus for dilute solutions, total-enthalpy flow calorimeter. Benchmark measurements were made (no data given) on pure and mixed alternative refrigerants and their mixtures with lubricants, and other fluids.

The report is divided into the following sections: completion of previous studies on solvation dynamics, dipole lattice studies, inertial components of solvation response, simple models of solvation dynamics, rotational dynamics and dielectric friction, intramolecular electron transfer reactions, and intermolecular donor-acceptor complexes.

The overall objective of our DOE-Ocean Margins Programs grant is to develop a pCO{sub 2} sensor for long-term monitoring of pCO{sub 2} in the ocean margins and to establish a proving ground for the development of other chemical sensors for characterizing the carbon cycle in these regions. We have succeeded in keeping with the approximate timeline outlined in the original proposal, which, for year 1 included the following objectives: Continue sensor optimization, test response characteristics (reagent and sample flow rates, temperature), introduce position sensitive photodiode and photodiode array spectrophotometers and evaluate, develop reliable and reproducible fabrication techniques, develop sensor based on preliminary studies optimized for field measurements (minimize size and power requirements), test long-term stability of the sensor in the laboratory, determine susceptibility to fouling and corrosion. This work is summarized below along with a brief review of the sensor`s operating principle.

This paper describes a genetic algorithm application to the DNA fragment assembly problems. The genetic algorithm uses a random key representation for representing the orderings of fragments. Two different fitness functions, both based on pairwise overlap strengths between fragments, were tested. The paper concludes that the genetic algorithm is a promising method for fragment assembly problems, achieving usable solutions quickly, but that the current fitness functions are flawed and that other representations might be more appropriate.

The Computer Incident Advisory Capability (CIAC) creates public information documents for the Dept. of Energy (DOE) related to computer security. These documents, known as the CIAC-2300 Series documents, are primarily concerned with information on security threats and methods for protecting systems from those threats. This document is a compilation of the abstracts of these documents.

The authors study the performance of feedforward artificial neural networks in forecasting future values of several different time series. They explore both short- and long-term prediction of several periodic time series. They find that a significant source of error in long-term prediction of time series is introduced by a phase shift between the network output and the time series. They explore the origin of this phase shift and suggest strategies for minimizing its effect. They find that the phase diagrams of the time series and the neural network forecast contain useful diagnostic information.

This report contains fluorescent spectral graphs of dopant materials for green wavelength shifting fibers.

This document outlines a detection-level groundwater monitoring program for the state-approved land disposal structure (SALDS). The SALDS is an infiltration basin proposed for disposal of treated effluent from the 200 Areas of the Hanford Site. The purpose of this plan is to present a groundwater monitoring program that is capable of determining the impact of effluent disposal at the SALDS on the quality of groundwater in the uppermost aquifer. This groundwater monitoring plan presents an overview of the SALDS, the geology and hydrology of the area, the background and indicator evaluation (detection) groundwater monitoring program, and an outline of a groundwater quality assessment (compliance) program. This plan does not provide a plan for institutional controls to track tritium beyond the SALDS.

This technical report investigates the feasibility of a Crystalline Beam in a weak-focussing storage ring like a Betatron. At the same time the curvature effect due to the bending magnet is also investigated. As a special case, the example of a circular one-dimensional string of electrically charged particles is examined. It is found that the motion of the particles is unstable due to the dependence of the precession movement with respect to each other on their radial displacement. That is a form of negative-mass instability which can be avoided with an alternating-focussing structure corresponding to a transition energy above the energy of the particles. The calculation of the particle-particle interaction as well as of the forces due to the external magnetic field is done directly in the laboratory frame. The retarded potential expressions are used at this purpose.

The US Department of Defense (DOD), through an Interagency Agreement with the US Department of Energy (DOE), has initiated a three-phase program with the Consortium for Coal-Water Slurry Fuel Technology, with the aim of decreasing DOD`s reliance on imported oil by increasing its use of coal. The program is being conducted as a cooperative agreement between the Consortium and DOE and the first phase of the program is underway. Phase I activities are focused on developing clean, coal-based combustion technologies for the utilization of both micronized coal-water mixtures (MCWMs) and dry, micronized coal (MC) in fuel oil-designed industrial boilers. Phase II research and development activities will continue to focus on industrial boiler retrofit technologies by addressing emissions control and pre-combustion (i.e., slagging combustion and/or gasification) strategies for the utilization of high ash and high sulfur coals. Phase III activities will examine coal-based fuel combustion systems that cofire wastes. Each phase includes an engineering cost analysis and technology assessment. The activities and status of Phase I are described below. The objective in Phase I is to deliver fully engineered retrofit options for a fuel oil- designed watertube boiler located on a DOD installation to fire either MCWM or MC. This will …

Pursuant to Section 1340(c) of the Energy Policy Act of 1992 (EPACT), this report presents the Secretary of Energy`s review of data collected by the Federal Government on rates for rail and pipeline transportation of domestic coal, oil, and gas for the years 1988 through 1997, and proposals to develop an adequate data base for each of the fuels, based on the data availability review. This report also presents the Energy Information Administration`s findings regarding the extent to which any Federal agency is studying the impacts of the Clean Air Act Amendments of 1990 (CAAA90) and other Federal policies on the transportation rates and distribution patterns of domestic coal, oil, and gas.