The purpose of the research project was to investigate the feasibility of the chemically assisted in situ retort method for recovering shale oil from Colorado oil shale. The chemically assisted in situ procedure uses hydrogen chloride (HCl), steam (H{sub 2}O), and carbon dioxide (CO{sub 2}) at moderate pressure to recovery shale oil from Colorado oil shale at temperatures substantially lower than those required for the thermal decomposition of kerogen. The process had been previously examined under static, reaction-equilibrium conditions, and had been shown to achieve significant shale oil recoveries from powdered oil shale. The purpose of this research project was to determine if these results were applicable to a dynamic experiment, and achieve penetration into and recovery of shale oil from solid oil shale. Much was learned about how to perform these experiments. Corrosion, chemical stability, and temperature stability problems were discovered and overcome. Engineering and design problems were discovered and overcome. High recovery (90% of estimated Fischer Assay) was observed in one experiment. Significant recovery (30% of estimated Fischer Assay) was also observed in another experiment. Minor amounts of freed organics were observed in two more experiments. Penetration and breakthrough of solid cores was observed in six experiments.

The direct partial oxidation of CH{sub 4} to CH{sub 3}OH has been studied in a non-permselective, non-isothermal catalytic membrane reactor system. A cooling tube introduced coaxially inside a tubular membrane reactor quenches the product stream rapidly so that further oxidation of CH{sub 3}OH is inhibited. Selectivity for CH{sub 3}OH formation is significantly higher with quenching than in experiments without quenching. For CH{sub 4} conversion of 4% to 7% CH{sub 3}OH selectivity is 40% to 50% with quenching and 25% to 35% without quenching.