A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Funeral program for Sister Mary W. Proctor, born June 28, 1928 and died December 17, 1993. The funeral was held Thursday, December 21, 1993 at Macedonia Baptist Church, officiated by Jerry Wm. Dailey. Funeral arrangements were made through Carter-Taylor-Williams Mortuary and she was buried in William Howard Day Cemetery in Steelton, Pennsylvania.

Photograph used for a story in the Daily Oklahoman newspaper. Caption: "Lucy Hawkins hangs a new mailbox at her Edmond home while Carolyn Roberts of the Central Oklahoma Home Builders Auxiliary and Hawkins' son, John, watch."

Photograph used for a story in the Daily Oklahoman newspaper. Caption: "Amy Hann, director of the hope Center."

Photograph used for a story in the Daily Oklahoman newspaper.

Photograph used for a story in the Daily Oklahoman newspaper. Caption: "Bill and Coe London, and Cody, Johnson and Lindsay Hightower, from left, at the London party."

Photograph used for a newspaper owned by the Oklahoma Publishing Company. Caption: "Ron Stinson Council Road Business Owner"

Photograph used for a newspaper owned by the Oklahoma Publishing Company. Caption: "Ron Stinson Stinson Trailer"

Photograph used for a story in the Daily Oklahoman newspaper. Caption: "Stinson Truck & Trailer Repair Owner Ron Stinson"

Photograph used for a story in the Daily Oklahoman newspaper. Caption: "It's disastrous" that large numbers of Oklahoma wells will be plugged and companies will be lost because of unprofitable oil prices, said commission chairman and oil producer John A. "Jack" Taylor, with Hiawatha Exploration Co., OKC."

This purpose of this document is to provide: a record of site visits, a summary of the comments received from the user survey forms and site interviews, a description of the manual process used for personnel security clearances. The participants in the user survey and site surveys were users at: DOE contractor clearance offices (LLNL), DOE operations offices (ORO,Y-12, Albuquerque ,Sandia, San Francisco) Office of Personnel Management (OPM) - Federal Investigations Processing Center (FIPC).

Photograph used for a story in the Daily Oklahoman newspaper. Caption: "Debbie Willoughby"

B-roll video footage from the KXAS-TV/NBC station in Fort Worth, Texas, covering a news story. This story aired at 6pm.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, covering a news story. This story aired at 10pm.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Weekly newspaper from Harper, Texas that includes local, state, and national news along with advertising.

Video footage from the KXAS-TV television station in Fort Worth, Texas, covering a news story.

An investigation into the preparation of sol-gel coatings for high power lasers was started at LLNL in 1983 and AR coatings were successfully developed for use in the Nova laser in 1984. Several other large lasers now use these coatings. Subsequent work on HR coatings resulted in AlOOH/SiO{sub 2} and later ZrO{sub 2} or HfO{sub 2}/SiO{sub 2} systems of good optical performance. The use of organic polymer binders gave increased damage threshold and enhanced optical performance. We are in the process of scaling up HR fabrication for substrates approximately 38 cm square. Concurrently we are developing sol-gel random phase plates for laser beam smoothing. These have a patterned surface design of silica which induces phase shifts in the beam by variation in the optical path length. Plates of this type on 80 cm diameter substrates have been used successfully on the Nova.

In order to reach the high fluence goals of the Beamlet laser at Lawrence Livermore National Laboratory (LLNL), the polarizers in the system must be laser conditioned to increase their damage thresholds. Research has shown that by using a six-step raster-conditioning program, the damage thresholds of the HfO{sub 2}/SiO{sub 2} multilayer polarizer coatings can be increased to meet the Beamlet 3-ns design goal of 8 J/cm{sub 2}. Because of the large size of the polarizers (73 cm {times} 37 cm {times} 9 cm), a large-area conditioning facility was constructed capable of rastering a one-meter optic, weighing as much as 400 pounds, at any specified use angle. A large translational stage moves the optic in a raster pattern through a stationary, 10-Hz rep-rated, 1064-nm beam with 10-ns pulses. A scatter measurement diagnostic allows on-the-fly evaluation of laser-induced damage and logs the coordinates of the damage. Laser energy is measured pulse-to-pulse in order to ensure stability during a scan. A small amount of minor coating damage does occur during the process, but the damage does not grow upon further irradiation. This damage causes only a small increase in total scatter compared to that due to the preexisting defects, and would not influence …

The scope of the Project is to develop and implement a ground water compliance strategy for all 24 UMTRA processing sites. The compliance strategy for the processing sites must satisfy requirements of the proposed EPA ground water cleanup standards in 40 CFR Part 192, Subparts B and C (1988). This scope of work will entail the following activities, on a site-specific basis: Development of a compliance strategy based upon modification of the UMTRA Surface Project remedial action plans (RAP) or development of Ground Water Project RAPs with NRC and state or tribal concurrence on the RAP; implementation of the RAP to include establishment of institutional controls, where appropriate; institution of long-term verification monitoring for transfer to a separate DOE program on or before the Project end date; and preparation of completion reports and final licensing on those sites that will be completed prior to the Project end date.

Laser induced damage to optical coatings is generally a localized phenomenon associated with coating defects. The most common of the defect types are the well-known nodule defect. This paper reviews the use of experiments and modeling to understand the formation of these defects and their interaction with laser light. Of particular interest are efforts to identify which defects are most susceptible to laser damage. Also discussed are possible methods for stabilizing these defects (laser conditioning) or preventing their initiation (source stabilization, spatter particle trapping).

The objectives of this project are to continue reservoir characterization of the Cypress Sandstone; to identify and map facies-defined waterflood units (FDWS); and to design and implement water-alternating-gas (WAG) oil recovery utilizing carbon dioxide (CO{sub 2}) The producibility problems are permeability variation and poor sweep efficiency. Part 1 of the project focuses on the development of computer-generated geological and reservoir simulation models that will be used to select sites for the demonstration and implementation of CO{sub 2} displacement programs in Part 2. Included in Part 1 is the site selection and drilling of an infill well, coring of the Cypress interval, and injectivity testing to gather information used to update the reservoir simulation model. Part 2 involves field implementation of WAG. Technology Transfer includes outreach activity such as seminars, workshops, and field trips.

We have completed a fifteen year, referenced and documented compilation of more than 15,000 measurements of laser-induced damage thresholds (LIDT) conducted at the Lawrence Livermore National Laboratory (LLNL). These measurements cover the spectrum from 248 to 1064 nm with pulse durations ranging from < 1 ns to 65 ns and at pulse-repetition frequencies (PRF) from single shots to 6.3 kHz. We emphasize the changes in LIDTs during the past two years since we last summarized our database. We relate these results to earlier data concentrating on improvements in processing methods, materials, and conditioning techniques. In particular, we highlight the current status of anti-reflective (AR) coatings, high reflectors (HR), polarizers, and frequency-conversion crystals used primarily at 355 nm and 1064 nm.

Daily newspaper from Sapulpa, Oklahoma that includes local, state, and national news along with advertising.