Experiences are reported of welding niobium to stainless steel for the TESLA accelerator superconducting cavities.

This publication presents an annual summary of statistics at the national, Census division, State, electric utility, and plant levels regarding the quantity, quality, and cost of fossil fuels used to produce electricity. The purpose of this publication is to provide energy decision-makers with accurate and timely information that may be used in forming various perspectives on issues regarding electric power.

A grant was awarded to us by the Department of Energy, Office of Energy Research, in May 1987 to support the design and performance analysis of a large grain data-driven multiprocessor system for numerical applications. The basic idea of the work is to apply the data-driven principles of execution at a more appropriate level than conventional ``atomic`` instructions. For this purpose, a level such as that of vector operations was under study. This document represents the final report concerning the results of the research supported by this grant. The goals of the project entailed an analysis of Partial Differential Equation solvers on data-driven environments, a preliminary design of our multi-level architecture, an in-depth study of some of the mechanisms of execution, and a design of the software environment. As enumerated in the original proposal, our work has yielded results in three different domain: Specifications of the application programs; design of the general concepts of the architecture and simulation; implementation of a translating environment; and we discuss each of the above items and examine specific research results.

A thermal analysis of the horizontal shipping container (HSC) was performed to determine the temperatures at the outer surface of the inner container during normal conditions of transport with incident solar radiation. There are two methods by which this analysis can be performed: (1) it can be run as a steady-state problem where it is assumed that the incident solar radiation is applied to the package 24 hours per day, or (2) it can be run as a cyclic transient problem where the incident solar radiation is applied for 12 hours per day and the other 12 hours there is assumed to be no incident solar radiation. The steady-state method was initially attempted, but the temperatures determined from this analysis were judged to be significantly higher than one would find in the cyclic case. Thus, it was deemed necessary to perform a transient analysis to determine a more realistic temperature distribution within the HSC during normal conditions of transport. The heat transfer code HEATING 7.1 was used to perform these calculations. HEATING 7.1 is a heat conduction code capable of handling radiation, convection (forced and natural), and heat flux boundary conditions. Heat generation within a material is also possible with …

Pressure sensors from ten MKS series 390 and 690 Baratron{reg_sign} capacitance manometers were hydrostatically burst tested by the Engineering and Materials Technology Department (E&MT). Four MKS series 390 Baratron{reg_sign} 0{minus}10 torr sensors had an average case burst pressure of 915 psig. Five MKS series 690 Baratron{reg_sign} 0{minus}1 torr sensors had an average case burst pressure of 1301 psig, and one MKS series 690 Baratron{reg_sign} 0{minus}1000 torr sensor had a case burst pressure of 938 psig.

We are interested in the construction of the unit normal and the curvatures on some surface which is represented by finite elements. We shall start with the usual definitions for the unit normal and the first and second curvatures on a continuous surface. The unit normal on some surface defined by {var_phi}(x) = 0 is given by {cflx n} = {del} {phi}/{vert_bar}{del} {phi}{vert_bar}, where {del} signifies the familiar three-dimensional gradient operator in space, rather than the two-dimensional gradient on the a surface, which is commonly utilized in differential geometry. The first and second curvatures, J and K, which involve invariant functions of this normal, may be expressed in the form: 2J={del}{center_dot}{cflx n} and 2K={del}{center_dot}[{cflx n}({del}{center_dot}{cflx n}) + {cflx n} {times} ({del} {times} {cflx n}]. The expression for J has the same formal appearance regardless of which gradient operator is used, but the expression for K differs from the two-dimensional version because of the expansion for the Laplacian of a vector.

The study on forgings characterized machinability of the material by varying cutting speeds and feedrates utilizing four tools for the roughing operation and four tools for the semi-finish operation. Tools tested were obtained from four manufacturers. Twelve parts were machined utilizing an experimental design to determine all possible interactions between cutting speeds and feedrates. To evaluate the machinability of the material, quantitative measures in tool life, tool wear, surface finish, chip control, and material removal rates were analyzed. Benefits gained from this study are: higher material removal rates, longer tool life, minimal tool wear, improved chip control and reliability, increased productivity, and cost minimization.

In September 1989, the Occupational Safety and Health Administration (OSHA) issued a final ruling on lockout/tagout procedures. This ruling became effective in January 1990 and was eventually incorporated into the Code of Federal Regulations. The purpose of these procedures is to safeguard employees from hazardous energy while performing service or maintenance activities on machines and equipment. Approximately 39 million workers are protected by lockout/tagout procedures in general industry. OSHA estimates that adherence to the requirements in lockout/tagout procedures will eliminate nearly two percent of all workplace deaths. A lockout/tagout program is essential to the safe operation of all Department of Energy (DOE) facilities. The program outlined in this document consists of energy-control procedures, employee training and periodic inspections, and establishes the minimum requirements for lockout/tagout of equipment or system-energy sources that could cause injury to personnel. Because serious consequences can occur due to a lack of understanding and improper administration of this program, this document also includes a method for: Providing guidance for the control of hazardous energy, protecting employees from injury, defining responsibilities, and protecting equipment and facilities from damage.

Forty-four abstracts are presented of research projects in radiation chemistry, photochemistry, and related topics.

During the first quarter of the above contract, all the elements of Task 1 were completed. The first quarterly report presented an overview of a wetland and its increasing use in industrial wastewater treatment. An idealized, reaction engineering description of wetlands was presented to demonstrate how the various processes that occur in a wetland can be modeled. Previous work on the use of wetlands to remove BOD, TSS, Phosphorus and Nitrogen was reviewed. Recent literature on the application of wetland technology to the treatment of petroleum-related wastewater was critically evaluated and an outline of the research plans for the first year was delineated. Further, our literature search (nominally completed under Task 1) unearthed more recent studies (some unpublished) and a summary was included in the second quarterly report. In the second quarterly report, results of our efforts on the construction of a laboratory-type wetland were also reported. Initial studies on the use of wetland amendments such as modified-clays and algae cells were presented and discussed. Adsorption of heavy metal ions, Cu{sup 2+} and Cr(VI) onto soils drawn from the laboratory-type wetland built as a part of this contract has been undertaken and these results are presented and discussed in this …

The proposed action is to recycle slightly activated copper that is currently stored in a warehouse leased by Lawrence Berkeley Laboratory (LBL) to a scrap metal dealer. Subsequent reutilization of the copper would be unrestricted. This document addresses the potential environmental effects of recycling and reutilizing the activated copper. In addition, the potential environmental effects of possible future uses by the dealer are addressed. Direct environmental effects from the proposed action are assessed, such as air emissions from reprocessing the activated copper, as well as indirect beneficial effects, such as averting air emissions that would result from mining and smelting an equivalent quantity of copper ore. Evaluation of the human health impacts of the proposed action focuses on the pertinent issues of radiological doses and protection of workers and the public. Five alternatives to the proposed action are considered, and their associated potential impacts are addressed. The no-action alternative is the continued storage of the activated copper at the LBL warehouse. Two recycling alternatives are considered: recycling the activated copper at the Scientific Ecology Group (SEG) facility for re-use at a DOE facility and selling or giving the activated copper to a foreign government. In addition, two disposal alternatives evaluate …

The Instrument and External Dosimetry Section provides the calibration service for all portable radiation monitoring measuring and test equipment used on the Hanford Site. This document outlines the quality assurance (QA) plan for the Instrument Calibration and Evaluation Program. The scope of the QA plan in outlined, requirement specifications are provided, and QA program/organization and impact level are discussed.

The National Energy Information Center (NEIC), as part of its mission, provides energy information and referral assistance to Federal, State, and local governments, the academic community, business and industrial organizations, and the general public. Written for the general public, the EIA publication Energy Information Sheets was developed to provide information on various aspects of fuel production, prices, consumption and capability. The information contained herein pertains to energy data as of December 1991. Additional information on related subject matter can be found in other EIA publications as referenced at the end of each sheet.

Research in progress and plans for future investigations are briefly summarized for the following areas: light-ion structure and reactions; nuclear structure; peripheral heavy-ion reactions at medium and high energy; medium-energy heavy-ion collisions and properties of highly excited nuclear matter; and high-energy heavy-ion collisions and QCD plasma.

Through much of the last decade, the NSLS has been America`s preeminent source of synchrotron radiation. In the near future, The NSLS will face formidable competition from the third generation light sources, designed to produce high brightness beams from undulators. Because of the lattice design of the NSLS rings and the limited number of straight sections for new undulators it will be impossible to compete with the new rings in brightness at short wavelengths. It is not clear, however, how many experiments really need brightness and how many just need flux. A good strategy could lie in keeping the NSLS the highest flux synchrotron light source in the country and leaving the brightness frontier to the third generation rings. By using the technology developed for the SLAC B factory we can simultaneously raise the X-Ray Ring energy to 3.0 GeV and the current to 2.4 Amp. From these parameters I am calling the proposed upgrade X-324. After the X-324 upgrade, the X-Ray Ring will produce twenty times more synchrotron radiation power than is produced by today`s 250 mA, 2.5 GeV beams. This is a qualitative change from today`s conditions and will place great demands on the RF and vacuum systems. …

This report describes the Met-Pro Physical Chemical Treatment System which incorporates numerous integrated processes either physical or chemical in nature. They include the following: coagulation with chemicals; rapid mixing to assure intimate contact of influent and coagulant; controlled flocculation for maximum flock growth via addition of polymer; extended time clarification for optimum settling of solids; solids collection and disposal, and recycle for seeding; filtration for additional suspended solids removal; and ion exchange removal of uranium and heavy metals.

The maintenance pad site consists of a concrete pad and underlying soils, approximately 15 by 46 m in area, and a drainage ditch with dimensions of 2.4 by 91 m. The ditch is located approximately 60 m from the concrete pad and is oriented parallel to the pads long axis. The facility was built in 1943, at which time the concrete pad was the floor of a maintenance shed for railroad activities. In 1955, use of the facility as a maintenance shed was discontinued. Between 1955 and 1957, the facility was used as a radioactivity decontamination area for railroad cars; acetone-soaked rags were used to remove surface contamination from the cars. The concrete pad was washed down with a mixture of water and diesel fuel, which was then flushed via clay pipe to the drainage ditch. In 1963, the maintenance shed was torn down and the concrete pad covered with approximately one-half meter of fill. The concrete pad was re-exposed in 1993. The site was sampled for Toxicity Characteristic Leachate Procedure (TCLP) metals, volatile, and semi-volatile compounds, as well as for extractable fuel hydrocarbons. A total of 17 samples were collected from surface concrete, soil beneath surface concrete, and ditch …

This report covers the period from October 1, 1992 to March 1, 1993. The overall goals of the program task are to provide a final synthesis of six deep seismic reflection profiles and other geological and geophysical data from the southern Washington Cascades region where a probable extensive deep sedimentary basin has been discovered. This deep sedimentary basin is hypothesized from geological, regional magnetotelluric (MT), gravity, magnetic , and seismic reflection data as described in the American Association of Petroleum Geologists (AAPG) article by Stanley and others (1992). This report analyzed three seismic reflection profiles acquired by the Morgantown Energy Technology Centers in combination with the extensive MT and other data to outline a probable geological model for a thick conductive section of rocks in the southern Washington Cascades (called the Southern Washington Cascades conductor, SWCC). Earlier MT models suggested that the section consisted of an east-dipping package that extended to depths of as much as 20 km but appeared to surface in the Bear Canyon area near Morton, Washington and along the axis of the Carbon River and Morton anticlines. Interpretation of the first three DOE seismic reflection approximately confirmed the MT interpretation and added new information on anticlinal …

The goal for advanced steady-state operation in ITER should be to demonstrate the operation of the plasma core for a steady-state fusion reactor. To accomplish this the authors must develop steady-state operating scenarios at high beta for high fusion power density, low auxiliary power requirements (Q{sub CD} {ge} 25, where Q{sub CD} {triple_bond}P fusion/P{sub CD} and P{sub DC} is the power required for sustaining the plasma current) for low recirculating power requirements, and at moderate safety factor (q{sub {psi}} {le} 4.5) to minimize the cost for the tokamak core of a steady-state demonstration power reactor based on the operating modes demonstrated in ITER. The key to achieving steady-state operation at high fusion power in ITER will be the development of operating scenarios with very high bootstrap current fractions (f{sub BS} {ge} 90%) in which the radial profile of the bootstrap current density is well aligned with that of the total plasma current density, and for which the MHD {beta}-limit exceeds {beta}{sub n}{sup *} = 0.05 T{minus}m/MA. They are in the process of developing such operating modes for ITER. In {section}1 they propose two advanced steady-state operating points; a preliminary operating point that was the basis for the MHD studies reported …

Laser ablation-inductively coupled plasma-atomic emission spectrometry was used for in situ determination of uranium and thorium concentrations in soil at 80 sampling sites in the Sewage Treatment Plant area. This work was performed by the Environmental Technology Development Program of the Ames Laboratory using a completely self-contained mobile laboratory. This laboratory, the mobile demonstration laboratory for environmental screening technologies and the robotic sampling accessory, were designed and constructed by the Ames Laboratory during FY 1992. The instrumentation is capable of analyzing each sample for twenty operator-defined elements simultaneously. Using the MDLEST/RSA, the uranium concentrations in the soil at the 80 sampling sites were found to range from <20 parts-per-million (ppM)(<13.5 pCi/g) to 303 ppM (205 pCi/g). The 95% confidence interval for these field determined values range from 80 to 110 ppM. Bore hole samples from two sites were analyzed. No measurable uranium concentration was detected below the one foot depth. Seven samples taken from sites within an area currently under remediation were analyzed and found to contain uranium concentrations ranging from 101 ppM (68.3 pCi/g) to 788 ppM (532 pCi/g). Soil samples were taken from twelve of the 80 sampling sites in the field, using conventional sampling techniques. These samples …

Material removal rate, surface finish, and subsurface damage are largely governed by fracture mechanics and plastic deformation, when ceramics are machined using abrasive methods. A great deal of work was published on the fracture mechanics of ceramics in the late 1970s and early 1980s, although this work has never resulted in a comprehensive model of the fixed abrasive grinding process. However, a recently published model describes many of the most important features of the loose abrasive machining process, for example depth of damage, surface roughness, and material removal rate. Many of the relations in the loose abrasive machining model can be readily discerned from fracture mechanics models, in terms of material properties. By understanding the mechanisms of material removal, from a material properties perspective, we can better estimate how one material will machine in relation to another. Although the fracture mechanics models may have been developed for loose abrasive machining, the principles of crack initiation and propagation are equally valuable for fixed abrasive machining. This report provides a brief review of fracture in brittle materials, the stress distribution induced by abrasives, critical indenter loads, the extension of cracks, and the relation of the fracture process to material removal.

The apparatus used for ammonia saturation and TPD (=temperature programmed desorption?) testing was modified to avoid repeated injections of NH{sub 3}. Saturation and TPD results are presented for potassium-doped {gamma}-alumina. In order to examine effects of Mo oxide promotion on catalytic activity of alumina-supported Rh catalyst, additional samples of Rh/{gamma}-Al{sub 2}O{sub 3} and Rh-Mo/{gamma}-Al{sub 2}O{sub 3} have been synthesized. 2 tabs, 3 figs.

The Winter Fuels Report is intended to provide concise, timely information to the industry, the press, policymakers, consumers, analysts, and State and local governments on the following topics: distillate fuel oil net production, imports and stocks on a US level and for all Petroleum Administration for Defense Districts (PADD) and product supplied on a US level; propane net production, imports and stocks on a US level and for PADD`s I, II, and III; natural gas supply and disposition and underground storage for the US and consumption for all PADD`s; as well as selected National average prices. Residential and wholesale pricing data for heating oil and propane for those States participating in the joint Energy Information Administration (EIA)/State Heating Oil and Propane Program; crude oil and petroleum price comparisons for the US and selected cities; and a 6--10 day, 30-day, and 90-day outlook for temperature and precipitation and US total heating degree-days by city.

Research in progress and plans for future investigations are briefly summarized for the following areas: light-ion structure and reactions; nuclear structure; peripheral heavy-ion reactions at medium and high energy; medium-energy heavy-ion collisions and properties of highly excited nuclear matter; and high-energy heavy-ion collisions and QCD plasma.