38,016 Matching Results

Results open in a new window/tab.

A 1

Access: Use of this item is restricted to the UNT Community
Recording of Daniel Schachter's A 1. This piece uses traditional electronic technique and emphasizes on musical gestures. The sounds are mostly synthetically constructed and are heard throughout the piece.
Date: 1992
Creator: Schachter, Daniel, 1953-
Object Type: Sound
System: The UNT Digital Library
1 Corinthians 1:18-31 transcript

1 Corinthians 1:18-31

Lecture given Monday, February 24, 1992, 8:30 AM at Abilene Christian University
Date: February 24, 1992
Creator: Holladay, Carl
Object Type: Sound
System: The Portal to Texas History
1 Corinthians 2:6-16 transcript

1 Corinthians 2:6-16

Lecture given Monday, February 24, 1992, 11:00 AM at Abilene Christian University
Date: February 24, 1992
Creator: Holladay, Carl
Object Type: Sound
System: The Portal to Texas History
1 Corinthians 4:8-13 transcript

1 Corinthians 4:8-13

Lecture given Monday, February 24, 1992, 3:30 PM at Abilene Christian University
Date: February 24, 1992
Creator: Holladay, Carl
Object Type: Sound
System: The Portal to Texas History
1 Corinthians 14 - the Edifying Assembly transcript

1 Corinthians 14 - the Edifying Assembly

Lecture given Tuesday, February 25, 1992, 3:30 PM at Abilene Christian University
Date: February 25, 1992
Creator: Ferguson, Everett
Object Type: Sound
System: The Portal to Texas History
1 Corinthians 14 - The Edifying Assembly transcript

1 Corinthians 14 - The Edifying Assembly

Lecture given Tuesday, February 25, 1992, 8:30 AM at Abilene Christian University
Date: February 25, 1992
Creator: Ferguson, Everett
Object Type: Sound
System: The Portal to Texas History
1 Corinthians 14 - The Edifying Assembly transcript

1 Corinthians 14 - The Edifying Assembly

Lecture given Tuesday, February 25, 1992, 11:00 AM at Abilene Christian University
Date: February 25, 1992
Creator: Ferguson, Everett
Object Type: Sound
System: The Portal to Texas History
1/m<sub>c</sub> Terms in lambda<sup>+</sup><sub>c</sub> Semileptonic Decays (open access)

1/m<sub>c</sub> Terms in lambda<sup>+</sup><sub>c</sub> Semileptonic Decays

We use the heavy quark effective theory to investigate the form factors that describe the semileptonic decays lambda<sup>+</sup><sub>c</sub> -> lambda e<sup>+</sup> nu, to order 1/m<sub>c</sub>. We find that a total of four form factors are needed to this order, in contrast with two form factors to leading order, and six form factors in the most general case. We point out some relationships that arise among the general form factors.
Date: February 1, 1992
Creator: Roberts, Winston
Object Type: Article
System: The UNT Digital Library
A 2 to 4 nm high power FEL on the SLAC linac (open access)

A 2 to 4 nm high power FEL on the SLAC linac

We report the results of preliminary studies of a 2 to 4 nm SASE FEL, using a photoinjector to produce the electron beam, and the SLAC linac to accelerate it to an energy up to 10 GeV. Longitudinal bunch compression is used to increases ten fold the peak current to 2.5 kA, while reducing the bunch length to the subpicosecond range. The saturated output power is in the multi-gigawatt range, producing about 10{sup 14} coherent photons within a bandwidth of about 0.2% rms, in a pulse of several millijoules. At 120Hz repetition rate the average power is about 1 W. The system is optimized for x-ray microscopy in the water window around 2 to 4 nm, and will permit imaging a biological sample in a single subpicosecond pulse.
Date: September 1, 1992
Creator: Pellegrini, C.; Rosenzweig, J.; Nuhn, H. D.; Pianetta, P.; Tatchyn, R.; Winick, H. et al.
Object Type: Article
System: The UNT Digital Library
3-D Field Computations for Accelerator Magnets Using Finite Element and Integral Codes (open access)

3-D Field Computations for Accelerator Magnets Using Finite Element and Integral Codes

Two dimensional (2-D) computation has been an accepted part of the design of accelerator magnets since the 1960's, but three-dimensional (3-D) computations are still not fully trusted. This paper describes the successes and limitations of 3-D computations, as applied to accelerator magnets for the Advanced Photon Source (APS) at Argonne National Laboratory (ANL). Both the finite element code TOSCA and the edge element volume integral code CORAL have been used in these computations. The ends of the dipole bending magnet for the injector synchrotron were designed using TOSCA; comparisons with measurements are described. Computation of other APS magnets are also described.
Date: 1992~
Creator: Turner, L. R.; Kim, S. H.; Kim, K. & Kettunen, L.
Object Type: Article
System: The UNT Digital Library
3-D field computations for accelerator magnets using finite element and integral codes (open access)

3-D field computations for accelerator magnets using finite element and integral codes

Two dimensional (2-D) computation has been an accepted part of the design of accelerator magnets since the 1960`s, but three-dimensional (3-D) computations are still not fully trusted. This paper describes the successes and limitations of 3-D computations, as applied to accelerator magnets for the Advanced Photon Source (APS) at Argonne National Laboratory (ANL). Both the finite element code TOSCA and the edge element volume integral code CORAL have been used in these computations. The ends of the dipole bending magnet for the injector synchrotron were designed using TOSCA; comparisons with measurements are described. Computation of other APS magnets are also described.
Date: December 1, 1992
Creator: Turner, L. R.; Kim, S. H.; Kim, K. & Kettunen, L.
Object Type: Article
System: The UNT Digital Library
3-D numerical investigation of the mantle dynamics associated with the breakup of Pangea (open access)

3-D numerical investigation of the mantle dynamics associated with the breakup of Pangea

Three-dimensional finite element calculations in spherical geometry are performed to study the response of the mantle with platelike blocks at its surface to an initial condition corresponding to subduction along the margins of Pangea. The mantle is treated as an infinite Prandtl number Boussinesq fluid inside a spherical shell with isothermal, undeformable, free-slip boundaries. Nonsubducting rigid blocks to model continental lithosphere are included in the topmost layer of the computational mesh. At the beginning of the numerical experiments these blocks represent the present continents mapped to their approximate Pangean positions. Asymmetrical downwelling at the margins of these nonsubducting blocks results in a pattern of stresses that acts to pull the supercontinent apart. The calculations suggest that the breakup of Pangea and the subsequent global pattern of seafloor spreading was driven largely by the subduction at the Pangean margins.
Date: January 1, 1992
Creator: Baumgardner, J. R.
Object Type: Article
System: The UNT Digital Library
3-D numerical investigation of the mantle dynamics associated with the breakup of Pangea (open access)

3-D numerical investigation of the mantle dynamics associated with the breakup of Pangea

Three-dimensional finite element calculations in spherical geometry are performed to study the response of the mantle with platelike blocks at its surface to an initial condition corresponding to subduction along the margins of Pangea. The mantle is treated as an infinite Prandtl number Boussinesq fluid inside a spherical shell with isothermal, undeformable, free-slip boundaries. Nonsubducting rigid blocks to model continental lithosphere are included in the topmost layer of the computational mesh. At the beginning of the numerical experiments these blocks represent the present continents mapped to their approximate Pangean positions. Asymmetrical downwelling at the margins of these nonsubducting blocks results in a pattern of stresses that acts to pull the supercontinent apart. The calculations suggest that the breakup of Pangea and the subsequent global pattern of seafloor spreading was driven largely by the subduction at the Pangean margins.
Date: October 1, 1992
Creator: Baumgardner, J. R.
Object Type: Article
System: The UNT Digital Library

[4 Building 138, (obligue of N & E sides looking SSW)]

Photograph of the 4 Building 138 in Killeen, Texas.
Date: September 1, 1992
Creator: Texas Historical Commission
Object Type: Photograph
System: The Portal to Texas History

E-4 Crew (8-9-92)

None
Date: August 9, 1992
Creator: unknown
Object Type: Photograph
System: The Gateway to Oklahoma History

[4 For the Road: Aids Benefit]

Poster from the Turtle Creek Chorale Collection for their "4 For the Road" Aids benefit concert on June 27th, 1992. An illustration of a suit with a red aids awareness ribbon pinned to it's lapel decorates the poster.
Date: June 27, 1992
Creator: Turtle Creek Chorale
Object Type: Poster
System: The UNT Digital Library

E-5 E-One (2-5-1992)

None
Date: February 5, 1992
Creator: unknown
Object Type: Photograph
System: The Gateway to Oklahoma History

5 new engines (12-3-1992)

None
Date: December 3, 1992
Creator: unknown
Object Type: Photograph
System: The Gateway to Oklahoma History
7-GeV Advanced Photon Source Instrumentation Initiative. Conceptual Design Report (open access)

7-GeV Advanced Photon Source Instrumentation Initiative. Conceptual Design Report

In this APS Instrumentation Initiative, 2.5-m-long and 5-m-long insertion-device x-ray sources will be built on 9 straight sections of the APS storage ring, and an additional 9 bending-magnet sources will also be put in use. The front ends for these 18 x-ray sources will be built to contain and safeguard access to these bright x-ray beams. In addition, funds will be provided to build state-of-the-art insertion-device beamlines to meet scientific and technological research demands well into the next century. This new initiative will also include four user laboratory modules and a special laboratory designed to meet the x-ray imaging research needs of the users. The Conceptual Design Report (CDR) for the APS Instrumentation Initiative describes the scope of all the above technical and conventional construction and provides a detailed cost and schedule for these activities. According to these plans, this new initiative begins in FY 1994 and ends in FY 1998. The document also describes the preconstruction R & D plans for the Instrumentation Initiative activities and provides the cost estimates for the required R & D.
Date: October 1992
Creator: Argonne National Laboratory
Object Type: Report
System: The UNT Digital Library
7-GeV Advanced Photon Source Instrumentation Initiative conceptual design report (open access)

7-GeV Advanced Photon Source Instrumentation Initiative conceptual design report

In this APS Instrumentation Initiative, 2.5-m-long and 5-m-long insertion-device x-ray sources will be built on 9 straight sections of the APS storage ring, and an additional 9 bending-magnet sources will also be put in use. The front ends for these 18 x-ray sources will be built to contain and safeguard access to these bright x-ray beams. In addition, funds will be provided to build state-of-the-art insertion-device beamlines to meet scientific and technological research demands well into the next century. This new initiative will also include four user laboratory modules and a special laboratory designed to meet the x-ray imaging research needs of the users. The Conceptual Design Report (CDR) for the APS Instrumentation Initiative describes the scope of all the above technical and conventional construction and provides a detailed cost and schedule for these activities. According to these plans, this new initiative begins in FY 1994 and ends in FY 1998. The document also describes the preconstruction R&D plans for the Instrumentation Initiative activities and provides the cost estimates for the required R&D.
Date: December 1992
Creator: unknown
Object Type: Report
System: The UNT Digital Library
7-GeV Advanced Photon Source Instrumentation Initiative conceptual design report (open access)

7-GeV Advanced Photon Source Instrumentation Initiative conceptual design report

In this APS Instrumentation Initiative, 2.5-m-long and 5-m-long insertion-device x-ray sources will be built on 9 straight sections of the APS storage ring, and an additional 9 bending-magnet sources will also be put in use. The front ends for these 18 x-ray sources will be built to contain and safeguard access to these bright x-ray beams. In addition, funds will be provided to build state-of-the-art insertion-device beamlines to meet scientific and technological research demands well into the next century. This new initiative will also include four user laboratory modules and a special laboratory designed to meet the x-ray imaging research needs of the users. The Conceptual Design Report (CDR) for the APS Instrumentation Initiative describes the scope of all the above technical and conventional construction and provides a detailed cost and schedule for these activities. According to these plans, this new initiative begins in FY 1994 and ends in FY 1998. The document also describes the preconstruction R D plans for the Instrumentation Initiative activities and provides the cost estimates for the required R D.
Date: December 1, 1992
Creator: unknown
Object Type: Report
System: The UNT Digital Library
9-1-1 Caller, Volume 4, Number 1, January/February 1992 (open access)

9-1-1 Caller, Volume 4, Number 1, January/February 1992

Bimonthly newsletter of the Texas Advisory Commission on State Emergency Communications discussing news and activities of the organization as well as other information related to 9-1-1 services and other emergency communication within Texas.
Date: January 1992
Creator: Texas. Advisory Commission on State Emergency Communications.
Object Type: Journal/Magazine/Newsletter
System: The Portal to Texas History
9-1-1 Caller, Volume 4, Number 2, March/April 1992 (open access)

9-1-1 Caller, Volume 4, Number 2, March/April 1992

Bimonthly newsletter of the Texas Advisory Commission on State Emergency Communications discussing news and activities of the organization as well as other information related to 9-1-1 services and other emergency communication within Texas.
Date: March 1992
Creator: Texas. Advisory Commission on State Emergency Communications.
Object Type: Journal/Magazine/Newsletter
System: The Portal to Texas History
9-1-1 Caller, Volume 4, Number 3, May/June 1992 (open access)

9-1-1 Caller, Volume 4, Number 3, May/June 1992

Bimonthly newsletter of the Texas Advisory Commission on State Emergency Communications discussing news and activities of the organization as well as other information related to 9-1-1 services and other emergency communication within Texas.
Date: May 1992
Creator: Texas. Advisory Commission on State Emergency Communications.
Object Type: Journal/Magazine/Newsletter
System: The Portal to Texas History