Several potential additives and the use of influent pH adjustment were examined to remediated the biofouling problem of the ETF reverse osmosis (RO) system. Tests were conducted with simulated RO feed containing salt, metal hydroxides and bacteria. The addition of sodium hexametaphosphate (SHMP), sodium bisulfite, and adjusting the influent pH to 3 were each successful in reducing the RO biofouling. Little or no benefit was found from the use of a biofilm remover (Filmtec Alkaline Cleaner) or the use of surfactants (Surfynol or sodium lauryl sulfate). In addition, Surfynol use resulted in irreversible fouling and necessitated membrane replacement. At the water recoveries used in the ETF (>90%), sodium bisulfite addition resulted in the recovery of 70--90% of the flux and almost complete restoration of the DF to prefouled conditions. Based on the bench-scale tests completed, IWT would recommend that sodium bisulfite addition be tested at the ETF. This testing would involve optimizing the amount of bisulfite required. In addition, it is recommended that the addition of SHMP or influent pH adjustment be evaluated since the relative differences in labscale tests were small and scale-up effects could be present. The ETF operating permit allows each to be added.

This invention relates to a regenerable activated bauxite adsorber alkali monitor probe for field applications to provide reliable measurement of alkali-vapor 5 concentration in combustion gas with special emphasis on pressurized fluidized-bed combustion (PFBC) off-gas. More particularly, the invention relates to the development of a easily regenerable bauxite adsorbent for use in a method to accurately determine the alkali-vapor content of PFBC 10 exhaust gases.

Several potential additives and the use of influent pH adjustment were examined to remediated the biofouling problem of the ETF reverse osmosis (RO) system. Tests were conducted with simulated RO feed containing salt, metal hydroxides and bacteria. The addition of sodium hexametaphosphate (SHMP), sodium bisulfite, and adjusting the influent pH to 3 were each successful in reducing the RO biofouling. Little or no benefit was found from the use of a biofilm remover (Filmtec Alkaline Cleaner) or the use of surfactants (Surfynol or sodium lauryl sulfate). In addition, Surfynol use resulted in irreversible fouling and necessitated membrane replacement. At the water recoveries used in the ETF (>90%), sodium bisulfite addition resulted in the recovery of 70--90% of the flux and almost complete restoration of the DF to prefouled conditions. Based on the bench-scale tests completed, IWT would recommend that sodium bisulfite addition be tested at the ETF. This testing would involve optimizing the amount of bisulfite required. In addition, it is recommended that the addition of SHMP or influent pH adjustment be evaluated since the relative differences in labscale tests were small and scale-up effects could be present. The ETF operating permit allows each to be added.

The first task in our proposed study of catalysts for coal liquefaction was to prepare ultrafine dispersed metal sulfide particles by reactive precipitation from solutions of appropriate metal precursors. At this point, equipment to allow us to prepare these air-sensitive materials in an anaerobic environment has been acquired and assembled. Initial experiments aimed at synthesizing iron sulfide particles have been initiated. As part of the investigation of short contact time catalytic coal liquefaction, initial efforts focused on the noncatalytic pyrolysis reactions of coal and a model compound, Dibenzyl ether (DBE). Two different reactor configurations were examined; catalytic experiments are planned for the coming month.

A total of 31 samples from the Long Duration Exposure Facility (LDEF), including materials of aluminum, vanadium, and steel trunnions were analyzed by ultra-low-level gamma spectroscopy. The study quantified particle induced activations of {sup 22}Na, {sup 46}Sc, {sup 51}Cr, {sup 54}Mn, {sup 56}Co, {sup 57}Co, {sup 58}Co, and {sup 60}Co. The samples of trunnion sections exhibited increasing activity toward the outer end of the trunnion and decreasing activity toward its radial center. The trunnion sections did not include end pieces, which have been reported to collect noticeable {sup 7}Be on their leading surfaces. No significant {sup 7}Be was detected in the samples analyzed. The Underground Counting Facility at Savannah River Laboratory (SRL) was used in this work. The facility is 50 ft. underground, constructed with low-background shielding materials, and operated as a clean room. The most sensitive analyses were performed with a 90%-efficient HPGe gamma-ray detector, which is enclosed in a purged active/passive shield. Each sample was counted for one to six days in two orientations to yield more representative average activities for the sample. The non-standard geometries of the LDEF samples prompted the development of a novel calibration method, whereby the efficiency about the samples surfaces (measured with point …

Tests were conducted to determine whether the reverse osmosis (RO) units at the F/H Effluent Treatment Facility (ETF) at the Savannah River could be made to process solutions containing tri-n-butyl phosphate (TBP). It was desired to test whether operation at a feed pH other than neutral would improve performance. Test results are discussed in this report and indicate that little improvement in the water flux can be expected at other pH values.

The simplest explanation for these shifts in the infrared spectra is there exists in coal single electron donors which are capable of transferring an electron to TCNQ in the ground state. All of the TCNQ placed in the coal appears to be converted to the radical anion as displayed in the IR spectrum for all of the coals except for the 100% loading.

We have made a detailed study of the care that must be taken to correctly measure OH radical concentrations in flames. A large part of these studies has concerned collisional quenching of hydride radical species (OH, NH, and NH{sub 2}), in particular the dependence upon rotational level and collision velocity (temperature). The results on OH and NH have shown unique and interesting behavior from the viewpoint of fundamental molecular dynamics, pointing to quenching often governed by collisions on an anisotropic, attractive surface, whereas NH{sub 2} quenching appears to depend on state-mixing considerations, not dynamic control. This state-specific behavior of these small, theoretically tractable hydrides has direct ramifications for quantitative flame diagnostics. Our other effort in the diagnostic area has been repeated but unsuccessful searches for laser induced fluorescence in the vinyl radical.

The purpose of the present program is to develop soluble analogs of surface confined catalysts that can be impregnated directly into the coal structure at low temperatures. This approach should avoid problems related to surface area dependence, a two phase (surface-liquid) reaction system and, mass transport limitations.

A list of 491 analytical procedures to directly support waste and environmental analytical work is attached. The list is available from the author as a lotus or excel spreadsheet file.

The Coal Project was able to make considerable progress in understanding the evolving energy situation in Asia and the future role of coal and Clean Coal Technologies. It is clear that there will be major growth in consumption of coal in Asia over the next two decades -- we estimate an increase of 1.2 billion metric tons. Second, all governments are concerned about the environmental impacts of increased coal use, however enforcement of regulations appears to be quite variable among Asian countries. There is general caution of the part of Asian utilities with respect to the introduction of CCT`s. However, there appears to be potential for introduction of CCT`s in a few countries by the turn of the century. It is important to emphasize that it will be a long term effort to succeed in getting CCT`s introduced to Asia. The Coal Project recommends that the US CCT program be expanded to allow the early introduction of CCT`s in a number of countries.

The objective of this project is the synthesis of a new naphthalene-hydroxynaphthalene polymer model compound for use in coal combustion studies. Since this compound is an unreported compound, this effort also requires the development of a synthetic route to this compound, including the synthesis of unreported intermediates leading to its synthesis. Complex product mixtures have been consistently obtained with all of our approaches. As a result, we have been constantly making small modifications to our technical approach. These changes are discussed in this report. Our synthesis efforts resulted in a number of potential precursors and intermediates. When appropriate, these compounds were submitted to the Organic Chemistry Research Area`s Analytical Section for characterization and identification.

I have investigated trigger requirements for the intermediate tracking system of the SDC detector, using muons in the final states of some physics processes of interest and relevance to the program envisaged to be pursued at the SSC. The study is done at the physics event generator level with the PYTHIA package, augmented by a very simplistic simulation of the momentum measurement expected from the intermediate tracking system. For the range in pseudorapidity of {vert_bar}{eta}{vert_bar} = 1.7--2.5, I find a subdivision into four basic bins sufficient to ensure that the width of the transverse momentum trigger threshold will not be dominated by the lack of knowledge of the polar angle. In addition, the azimuthal resolution has be better than 1 mrad to allow transverse momentum thresholds from p{sub t}{approx}10 GeV/c up to and beyond p{sub t}=20 GeV/c to be implemented which are needed to accomplish the physics goals. 10 figs., 1 tab.

This progress report will give a detailed breakdown of the work accomplished for ARIES-III during the contract period, November 1, 1990 to October 31, 1991. The areas of effort discussed are: Neutronics; First-Wall; Shield; Safety; Systems; Startup and Shutdown; Energy Conversion; Ripple Loss; and Fuel Resources.

Tests were conducted to determine whether the reverse osmosis (RO) units at the F/H Effluent Treatment Facility (ETF) at the Savannah River could be made to process solutions containing tri-n-butyl phosphate (TBP). It was desired to test whether operation at a feed pH other than neutral would improve performance. Test results are discussed in this report and indicate that little improvement in the water flux can be expected at other pH values.

The objective of this project is the synthesis of a new naphthalene-hydroxynaphthalene polymer model compound for use in coal combustion studies. Since this compound is an unreported compound, this effort also requires the development of a synthetic route to this compound, including the synthesis of unreported intermediates leading to its synthesis. Complex product mixtures have been consistently obtained with all of our approaches. As a result, we have been constantly making small modifications to our technical approach. These changes are discussed in this report. Our synthesis efforts resulted in a number of potential precursors and intermediates. When appropriate, these compounds were submitted to the Organic Chemistry Research Area's Analytical Section for characterization and identification.

The simplest explanation for these shifts in the infrared spectra is there exists in coal single electron donors which are capable of transferring an electron to TCNQ in the ground state. All of the TCNQ placed in the coal appears to be converted to the radical anion as displayed in the IR spectrum for all of the coals except for the 100% loading.

Research programs from the National Institute for Petroleum and Energy Research (NIPER) are briefly described. Topics include enhanced recovery, studies on reservoir rock, microbial EOR, development of analytical techniques for petroleum analysis, and imaging techniques applied to fluids study in porous media. (CBS)

The overall objectives of this program are to investigate potential technologies for the conversion of coal-derived synthesis gas to oxygenated fuels, hydrocarbon fuels, fuel intermediates, and octane enhancers, and to demonstrate the most promising technologies at DOE's LaPorte, Texas, Slurry Phase Alternative Fuels development Unit (AFDU). The program will initially involve a continuation of the work performed under the Liquid Phase Methanol Program but will later draw upon information and technologies generated in current and future DOE-funded contracts, as well as test commercially available catalysts. 1 fig., 3 tabs.

At Lawrence Livermore National Laboratory, we are studying above ground oil shale retorting and have developed the LLNL Hot-Recycled-Solid (HRS) process as a generic second-generation, rapid pyrolysis retorting system in which recycled shale is the solid heat carrier. In 1984--1987, we operated a 1 tonne-per-day HRS pilot plant to study retorting chemistry in an actual recirculation loop. In 1989 we upgraded our laboratory pilot plant to process 4 tonne-per-day of commercially sized shale, allowing us, for the first time, to study pyrolysis and combustion using the full particle size. With the new facility we are able to produce enough oil for detailed characterization studies, can evaluate environmental consequences, and begin answering the many bulk solid handling questions concerning scale-up of the HRS process. In this paper we report on operations of our laboratory (4TU) pilot plant and plans for a field test unit (FTU) at approximately 100 tonne-per-day scale to be sited in the western United States. 3 refs., 11 figs.

During the 1988--89 Tevatron Collider run the CDF detector has collected data for an integrated luminosity of 4.4 pb{sup {minus}1}. The sample has been used to search for the top quark in several topologies. Preliminary results show that a top mass below 89 GeV is excluded at the 95% confidence level, thus extending the limit of 77 GeV previously published by CDF. 14 refs., 8 figs.

A DYNA3D model of the DT-20 shipping container was constructed. Impact onto a rigid steel surface at a velocity of 44 ft/sec (30 foot gravity drop) was studied. The orientation of most interest was a side-drop, but end and corner drops were also studied briefly. The assembly for the baseline side impact contained a 150 lb. payload. During this drop, the outer drum sustains plastic strains of up to 0.15, with most the deformation near the rim. The plywood/Celotex packing is crushed about 3 inches. The inner sealed can sees significant stresses, but barely reaches the onset of yielding in some local areas. Based on hand calculations, the bolts joining the can halves could see stresses near 50 ksi. It is felt that overall, the container should survive this drop. However, detailed modeling of the rim closure and the center bolted joint was not possible due to time constraints. Furthermore, better material models and properties are needed for the Celotex, plywood, and honeycomb in particular. 39 figs., 1 tab.

Acceptance criteria for uranium check standards used to verify fluorimeter calibration have been developed. This work was done in response to Tiger Team finding QA/BMP-5, item 4. Data used as input to these calculations is retained in the Tiger Team closeout file, located in the Technical Service Division managers office. 3 refs., 4 tabs.

A Pulsed Lepton Source is being considered at the LAMPF facility at Los Alamos National Laboratory. The source plan is described together with a description of the components and performance as they exist at present. 9 figs.