This paper describes the design and operation of a 40-spatial channel Thomson scattering system that uses multiple 20 Hz Nd:YAG lasers to measure the electron temperature and density profiles periodically throughout an entire plasma discharge. Interference filter polychromators disperse the scattered light which is detected by silicon avalanche photodiodes. The measurable temperature range from 10 eV to 20 keV and the minimum detectable density is about 2 {times} 10{sup 18} m{sup {minus}3}. Laser control and data acquisition are performed in real-time by a VME-based microcomputer. Data analysis is performed by a MicroVAX 3400. Unique features of this system include burst mode'' operation, where multiple lasers are fired in rapid succession (< 10 KHz), real-time analysis capability, and laser beam quality and alignment monitoring during plasma operation. Results of component testing, calibration, and plasma operation are presented. 8 refs. 6 figs.

The electrical characteristics of a short (2{beta}{lambda}=0.4 m) resonator with large modulation (m=4) have been studied using the three dimensional codes, MAFIA. The complete resonator, including the modulated electrodes and a complex support structure, has been simulated using {approximately} 350,000 mesh points. Important characteristics studied include the resonant frequency, electric and magnetic fields distributions, quality factor and stored energy. The results of the numerical simulations are compared with the measurements of an actual resonator and analytical approximations. 7 refs., 3 figs., 1 tab.

The AFEL (Advanced Free-Electron Laser) Project at Los Alamos National Laboratory is presently under construction. The project's goal is to produce a very high-brightness electron beam which will be generated by a photocathode injector and a 20 MeV rf-linac. Initial laser experiments will be performed with a 1-cm-period permanent magnet wiggler which will generate intense optical radiation near a wavelength of 3.7 {mu}m. Future experiments will operate with slotted-tube'' electromagnetic wigglers (formerly called pulsed- wire'' wigglers). Experiments at both fundamental and higher-harmonic wavelengths are planned. This paper presents results of INEX (Integrated Numerical EXperiment) simulations of the optical performance of the AFEL. These simulations use the electron micropulse produced by the accelerator/beam transport code PARMELA in the 3-D FEL simulation code FELEX. 9 refs., 4 figs., 6 tabs.

A self-concentrating waste tank located at the Strontium Semiworks Facility in the 200 East Area of the Hanford Site will be decommissioned following waste removal. During a previous decommissioning phase, the tank, thought to be empty, was filled with grout to prevent it from collapsing over time. Several years later, an agitator rod was pulled from within the tank and found to contain significant amounts of radiation, indicating there was still radioactive waste in the tank. Several alternative waste-removal options have been researched and evaluated. It is concluded that before the waste is to be disposed, the grout must be removed. This paper addresses that effort.

During next physics run CDF will strongly enhance its heavy flavor tagging capabilities with the installation of a silicon vertex detector (SVX), that will allow precise measurements of secondary decay vertices in the plane transverse to the beam (impact parameter resolution {approx equal} 12 {mu}m). We expect this detector to have a significant impact on b-physics (c{tau}{sub B} {approx equal} 350 {mu}m) and top search. In the following we will discuss CDF prospects for top search and for CP violation asymmetry measurements in the B-sector. 16 refs., 5 figs., 1 tabs.

The Fermilab 1990--1991 Fixed Target Program featured six experiments utilizing liquid hydrogen or liquid deuterium targets as part of their apparatus. Each design was optimized to the criteria of the experiment, resulting in variations of material selection, methods of refrigeration and secondary containment. Collectively, the targets were run for a total of 14,184 hours with an average operational efficiency of 97.6%. The safe and reliable operation of these targets was complemented by an increased degree of documentation and component testing. This operation was also aided by several key upgrades. All the systems were designed and fabricated under a set of written guidelines that blend analytical calculations and empirical guidance drawn from over twenty years of target fabrication experience. 3 refs., 4 tabs.

The formation and radiative properties of clouds are poorly parameterized in numerical climate models, especially marine boundary layer clouds. Twomey (1991), after describing the importance of cloud microphysics to the climate problem, states Clearly, many more field measurements and laboratory experiments are called for, rather than endless repetitions of computer simulations that are closely related to each other and parameterize in very similar ways.'' The effort described here is a field experimental effort supported by the Department of Energy under its Quantitative Links'' program. The project is called Ship-Trail Evolution Above High Updraft Naval Targets (SEAHUNT). The purpose of this study is to improve our understanding of the meteorological context in which ship trails and other perturbations to marine boundary layer clouds occur. 8 refs., 6 figs.

Otherwise stable DIII-D discharges can become nonlinearly unstable to locked modes and disrupt when subjected to resonant m = 2, n = 1 error field caused by irregular poloidal field coils, i.e. intrinsic field errors. Instability is observed in DIII-D when the magnitude of the radial component of the m = 2, n = 1 error field with respect to the toroidal field is B{sub r21}/B{sub T} of about 1.7 {times} 10{sup {minus}4}. The locked modes triggered by an external error field are aligned with the static error field and the plasma fluid rotation ceases as a result of the growth of the mode. The triggered locked modes are the precursors of the subsequent plasma disruption. The use of an n = 1 coil'' to partially cancel intrinsic errors, or to increase them, results in a significantly expanded, or reduced, stable operating parameter space. Precise error field measurements have allowed the design of an improved correction coil for DIII-D, the C-coil'', which could further cancel error fields and help to avoid disruptive locked modes. 6 refs., 4 figs.

Aspects of recent measurements of the mesonic and non-mesonic partial decay rates of {sub {Lambda}}{sup 5}He, and {sub {Lambda}}{sup 12}C are discussed. We comment on what the experiments tell us about the spin-isospin structure of {Delta}S=1 weak interaction in the nuclear environment. 14 refs., 1 fig.

None

The objective of this work is to develop a regenerable activated-bauxite sorber alkali monitor that requires no high-temperature/high-pressure sampling line for the reliable in situ measurement of alkali-vapor concentration in the exhaust from the pressurized fluidized-bed combustion of coal. 11 refs., 2 figs., 1 tab.

The present rate of development of high-temperature superconductors (HTSs) is sufficiently rapid that there may be opportunities for their use in contemporary fusion devices such as the International Thermonuclear Experimental Reactor (ITER). The most likely 1application is for delivering power to the superconducting magnets, especially in substituting for the current leads between the temperatures of 4 K and 77K. A second possible application of HTSs is as a liquid-nitrogen-cooled power bus, connecting the power supplies to the magnets, thus reducing the ohmic heating losses over these relatively long cables. A third potential application of HTSs is as an inner high-field winding of the toroidal field coils that would operate at {approx}20 K. While the use of higher temperature magnets offers significant advantages to the reactor system, it is unlikely that tested conductors of this type will be available within the ITER time frame. 23 refs., 2 figs.

This report documents the development of a current transformer system used to measure pulsed ion beam currents with a wide dynamic intensity range (nA to mA, and factor of 10{sup 6}). Peak beam currents at the LAMPF accelerator typically range from 100 to nA to 40 mA with pulse widths varying from 30 to 1000 {mu}s. Signal conditioning of the peak current output provides an average current readout with a range of 1 nA to 2 mA, noise of approximately {plus minus}0.5 nA, and accuracy of {plus minus}0.1%. Since the system has proved stable and highly reliable, calibration is performed yearly. The prototype unit was built in 1985 and the final production unit was completed in early 1989. 5 refs., 14 figs.

We have used a bioenergetically-driven, individual-based model (IBM) of striped bass as a framework for synthesizing available information on population biology and quantifying, in a relative sense, factors that potentially affect year class success. The IBM has been configured to simulate environmental conditions experienced by several striped bass populations; i.e., in the Potomac River, MD; in Hudson River, NY; in the Santee-Cooper River System, SC, and; in the San Joaquin-Sacramento River System CA. These sites represent extremes in the geographic distribution and thus, environmental variability of striped bass spawning. At each location, data describing the physio-chemical and biological characteristics of the spawning population and nursery area are being collected and synthesized by means of a prioritized, directed field sampling program that is organized by the individual-based recruitment model. Here, we employ the striped bass IBM configured for the Potomac River, MD from spawning into the larval period to evaluate the potential for maternal contribution to affect larva survival and growth. Model simulations in which the size distribution and spawning day of females are altered indicate that larva survival is enhanced (3.3-fold increase) when a high fraction of females in the spawning population are large. Larva stage duration also is less …

A proposal is made for high-power microwave transfer in space. The concept consists in a microwave power station integrating a multistage microwave free-electron laser and asymmetric dual-reflector system. Its use in space is discussed. 9 refs., 2 figs., 1 tab.

The X25 beam line at the National Synchrotron Light Source (NSLS) began full-power commissioning in 1990. It extracts radiation from a 27 pole hybrid wiggler, which produces up to 1.8 kW of total power with a peak horizontal density of 450 W/mrad and critical energy of 4.6 keV. The design and performance of the beam line optics are described, in particular the cooling of the first monochromator crystal. 28 refs., 5 figs.

Exclusive measurements of charged products and neutrons were performed for the reactions {sup 197}Au + (29 MeV/u) {sup 208}Pb and {sup 209}Bi + (28.2 MeV/u) {sup 136}Xe. The multiplicities of neutrons and charged particles are found to indicate collision impact parameters with different sensitivities. Characteristic correlations observed between massive products and light particles suggest the dominance of the damped-reaction mechanism in the Fermi energy domain. For central collisions, massive fragments are no longer observed, and a considerable fraction of the mass of the system is found disassembled into light particles and clusters. 75 refs., 19 figs.

The Advanced Photon Source (APS), a new synchrotron radiation facility being built at Argonne National Laboratory, will provide the world's most brilliant X-ray beams for research in a wide range of technical fields. Successful operation of the APS requires an extremely stable positron closed orbit. Vibration of the storage ring quadrupole magnets, even in the submicron range, can lead to distortion of the positron closed orbit and to potentially unacceptable beam emittance growth, which results in degraded performance. This paper presents an overview of the technical approach used to minimize vibration response, beginning at the conceptual stage, through design and construction, and on to successful operation. Acceptance criteria relating to maximum allowable quadrupole magnet vibration are discussed. Soil properties are used to determine resonant frequencies of foundations and to predict attenuation characteristics. Two sources are considered to have the potential to excite the foundation: far-field sources, which are produced external to the facility, and near-field sources, which are produced within the facility. Measurements of ambient ground motion, monitored to determine far- field excitation, are presented. Ambient vibration was measured at several operating facilities within Argonne to gain insight on typical near-field excitation sources. Discussion covers the dynamic response characteristics of …

The most effective general formulations of thermodynamic equations for multicomponent aqueous solutions are discussed with respect to various ranges of temperature, pressure and composition with emphasis on solutes important in natural or industrial waters. A familiar equation in molality and in excess Gibbs energy is very successful up to 300{degree}C and ionic strength 6 mol{center dot}kg{sup {minus}1}, and can often be extended to 350{degree}C or above at high pressure and in favorable cases to ionic strength 12 or even 20. Alternate methods valid to higher solute compositions, even to pure fused salts, are described. A more difficult situation arises near the critical point of water where the compressibility becomes infinite and a Helmholtz energy basis must be adopted. Existing equations for this range and still higher temperatures and pressures are considered and possible improvements discussed. 85 refs., 13 figs., 3 tabs.

A major center with emphasis on validation of nondestructive inspection techniques for aging aircraft, the Aging Aircraft NDI Development and Demonstration Center (AANC), has been funded by the FAA at Sandia National Laboratories. The Center has been assigned specific tasks in developing techniques for the nondestructive inspection of static engine parts, assessing inspection reliability (POD experiments), developing test beds for nondestructive inspection validation, maintaining a FAA library of characterized aircraft structural test specimens, and leasing a hangar to house a high flight cycle transport aircraft for use as a full scale test bed. 3 refs.

We review the available information on the identity of the neutrino states emitted in muon decay, and discuss the exotic decay {mu}{sup +} {yields} e{sup +} {bar {nu}}{sub e}{nu}{sub {mu}}. 22 refs.

Samples of the amino acid valine were irradiated by 2.5 MeV-Ar, 0.8 MeV-Kr and 1.0 MeV Xe beams from the Argonne Dynamitron accelerator in order to study the energy distributions of ejected secondary ions. For Kr and Xe the nuclear stopping power exceeded the electronic stopping power by a factor 2 or 3, respectively, but the functional shape of the energy distributions and the mean ejection energies (0.9--1.4 eV) indicated that the molecular ions (M{plus minus}H){sup {plus minus}} are desorbed by an electronic sputter process. Contributions of atomic collision cascades were observed for the H{sup {minus}} ion. In the second part of the article, the overall dependence of molecular ion yields on the electronic energy loss is discussed in the framework of recent desorption models and the structure of the nuclear track.

Two methods can be used to determine aerodynamic loads on a rotating wind turbine blade. The first is to make direct pressure measurements on the blade surface. This is a difficult process requiring costly pressure instrumentation. The second method uses measured flap bending moments in conjunction with analytical techniques to estimate airloads. This method, called ALEST, was originally developed for use on helicopter rotors and was modified for use on horizontal axis wind turbine blades. Estimating airloads using flap bending moments in much simpler and less costly because measurements can be made with conventional strain gages and equipment. This paper presents results of airload estimates obtained using both methods under a variety of operating conditions. Insights on the limitations and usefulness of the ALEST bending moment technique are also included. 10 refs., 6 figs.

We discuss the interplay between direct capture, valence capture, and compound-nuclear capture in attempting to explain the vast amount of capture data for light-mass nuclei. 13 refs.