The Biomed Control System is a hardware/software system used for the delivery, measurement and monitoring of heavy-ion beams in the patient treatment and biology experiment rooms in the Bevalac at the Lawrence Berkeley Laboratory (LBL). This paper describes some aspects of this system including historical background philosophy, configuration management, hardware features that facilitate software testing, software testing procedures, the release of new software quality assurance, safety and operator monitoring. 3 refs.

Following completion of the probabilistic analyses, the LOCA Definition Project has been subject to various external reviews, and as a result the need for several revisions has arisen. This report updates and summarizes the indirect failure frequency analysis for the process water piping. In this report, a conservatism of the earlier analysis is removed, supporting lower failure frequency estimates. The analysis results are also reinterpreted in light of subsequent review comments.

Following completion of the probabilistic analyses, the LOCA Definition Project has been subject to various external reviews, and as a result the need for several revisions has arisen. This report updates and summarizes the indirect failure frequency analysis for the process water piping. In this report, a conservatism of the earlier analysis is removed, supporting lower failure frequency estimates. The analysis results are also reinterpreted in light of subsequent review comments.

I discuss our current understanding of cosmic string evolution, and focus on the question of small scale structure on strings, where most of the disagreements lie. I present a physical picture designed to put the role of the small scale structure into more intuitive terms. In this picture one can see how the small scale structure can feed back in a major way on the overall scaling solution. I also argue that it is easy for small scale numerical errors to feed back in just such a way. The intuitive discussion presented here may form the basis for an analytic treatment of the small structure, which I argue in any case would be extremely valuable in filling the gaps in our resent understanding of cosmic string evolution. 24 refs., 8 figs.

I presented our report which described our technique of inferring electron temperature in a microwave induced plasma. The primary purpose of my trip to Kiev was to present a paper entitled Analysis of Nitrogen Light Emission from Artificially Ionized Layers (AIL) Breakdown'' at the AIL workshop. The AIL concept is to produce an ionized layer in the atmosphere from which radio frequency waves can be reflected. The workshop provided for the transfer of unclassified technology between the US and the USSR, who are reportedly years, if not decades, ahead of the US in this area of research.

We propose to investigate new methods of particle acceleration using a short-pulse CO{sub 2} laser as the power source and grating-like structures as accelerator cavities''. Phase I of this program is intended to demonstrate the principle of the method. We will focus the laser light to a 3 mm line on the surface of the microstructure. The structure is used to transform the electric field pattern of the incoming transversely polarized laser beam to a mode which has a component along the electron beam direction in the vicinity of the surface. With 6 mJ of laser energy and a 6 ps pulse length, the electric field in the spot will be around 1 GV/m. The electron beam from the Brookhaven Accelerator Test Facility (ATF) will be focused transversely within the few micron transverse dimension of the microstructure. The maximum expected acceleration for a 1 GV/m field and a 3 mm acceleration length is 3 MeV. 17 refs., 11 figs., 2 tabs.

This report is in fulfillment of the deliverable requirements for the optical components portions of the LANL-KrF Laser-Driven LMF Design Cost Reduction Study. This report examines the future cost reductions that may accrue through the use of mass production, innovative manufacturing techniques, and new materials. Results are based on data collection and survey of optical component manufacturers, BDM experience, and existing cost models. These data provide a good representation of current methods and technologies from which future estimates can be made. From these data, a series of scaling relationships were developed to project future costs for a selected set of technologies. The scaling relationships are sensitive to cost driving parameters such as size and surface figure requirements as well as quantity requirements, production rate, materials, and manufacturing processes. In addition to the scaling relationships, descriptions of the selected processes were developed along with graphical representations of the processes. This report provides a useful tool in projecting the costs of advanced laser concepts at the component level of detail. A mix of the most diverse yet comparable technologies was chosen for this study. This yielded a useful, yet manageable number of variables to examine. The study has resulted in a first-order …

Recent measurements of the cosmic background radiation (CBR) show an enhanced flux in the submillimeter regime, compared to the spectrum of a 2.7 K blackbody. Thermal Comptonization of the relic radiation by a hot nonrelativistic plasma has long been known to produce distortions in the CBR spectrum, similar to what has now been observed. Heating of the primeval plasma to temperatures T {approximately} 10{sup 6} {minus} 10{sup 8} K could result from the injection of subcosmic ray protons at epoch z {approximately} 10--100. The intensity of the subcosmic ray flux that provide conditions needed to explain the submillimeter excess by thermal Comptonization also leads to the production of cosmologically significant amounts of deuterium in collisions between subcosmic ray protons and primordial protons and {alpha}-particles. However, the amount of lithium produced through {alpha}-{alpha} reactions is in conflict with the observed Li abundance. If lithium is depleted, for example, by processing through Population II stars, arguments for the baryon content of the universe based on primordial deuterium and He abundances are weakened. 12 refs., 1 fig., 1 tab.

When I had to choose, within some narrow range, the topic of this paper, I received great help from a colleague in Berkeley and from Prof. Little when it was suggested that I should pick among the possible subjects of my talk the subject that Prof. Bloch would have enjoyed most. Since Prof. Bloch would prefer a scalpel over a sword every time, I hope and think that most people will approve my choice. When one intends to talk about a subject that is as old as conformal mapping and one does not want to lose the audience in a very short time, it is advisable to start by explaining both the motivation for the talk as well as the goals one has in mind when giving the talk. This particular talk has been motivated by the increasing frequency with which one hears, from people that ought to know better, statements like: 'Conformal mapping is really a thing of the past because of all the marvelous computer programs that we now have'. Even though, or more likely because, I have been intimately involved in the development of some large and widely used computer codes, I am deeply disturbed by such …

In a search for bursts of neutrons from Ti in pressurized D{sub 2} gas cells, no statistically significant deviations from the background were observed for events where five or more neutrons are detected over a ten day experiment, including 103 hours of counting with cells on, and 28 hours counting of various backgrounds. Up to four cells were used including some 60 grams of 662-Ti fillings in a pressurized cylinder with 40-60 atmosphere of D{sub 2} gas. Other Ti samples were used too. The samples were cooled to liquid nitrogen temperature and placed in front of the neutron detector while warming up to room temperature. Seven cooling cycles were used, for each sample. The neutron detector system included 12 liquid scintillator neutron detectors, arranged in a close packed geometry, with six detectors in the upper hemisphere and six in the lower hemisphere. A central detector placed 2 cm from the cells was used, in each hemisphere, as a scatterer for a time of flight coincidence measurement, yielding the total coincidence efficiency of {epsilon}=2{plus minus}1%. The system was also used in singles mode to allow for counting with large efficiency. A neutron event is characterized by measuring its pulse heights, pulse …

This is a continuation of previous studies aimed at predicting spectral signatures of discrete cosmic-ray sources. In this paper, a formalism is developed for calculating gamma-ray spectra observed at Earth from the decay of neutral pions formed in collisions of cosmic-ray protons and ions with galactic gas and dust. The cosmic rays are assumed to be emitted by discrete sources, and their intensities and spectra are described by solutions to a diffusion equation. Calculations of spectral signatures expected from these hypothetical point sources of cosmic rays are presented. In particular, a steady source of cosmic rays could show a harder gamma-ray spectrum than the spectrum of the diffuse galactic background, whereas an impulsive source of cosmic rays could show a much softer spectrum. Observations of the angular variations of gamma-ray intensities and spectra near point sources will provide information on cosmic-ray propagation in other parts of our galaxy, as well as on the nature of the discrete sources themselves. Capabilities of the Egret telescope in mapping spectra from cosmic-ray point sources are briefly discussed. 14 refs., 2 figs.

The AGS Distributed Control System (AGSDCS) uses a relational database (Interbase) for the storage of all data on the host system network. This includes the static data which describes the components of the accelerator complex, as well as data for application program setup and data records that are used in analysis. By creating a mapping of each elation in the database to a C record and providing general tools for relation (record) across, all the data in the database is available in a natural fashion (in structures) to all the C programs on any of the nodes of the control system. In this paper the correspondence between the Interbase elations and the C structure is detailed with examples of C typedefs and relation definitions. It is also shown how the relations can be put into memory and linked (related) together when fast access is needed by programs. 1 ref., 2 tabs.

Ohio Clean Fuels, Inc., (OCF) has licensed technology that involves Co-Processing (Co-Pro) poor grade (high sulfur) coal and residual oil feedstocks to produce clean liquid fuels on a commercial scale. Stone Webster is requested to perform a comparative technologies report for grassroot plants utilizing coal as a base fuel. In the case of Co-Processing technology the plant considered is the nth plant in a series of applications. This report presents the results of an economic comparison of this technology with other power generation technologies that use coal. Technologies evaluated were:Co-Processing integrated with simple cycle combustion turbine generators, (CSC); Co-Processing integrated with combined cycle combustion turbine generators, (CCC); pulverized coal-fired boiler with flue gas desulfurization and steam turbine generator, (PC) and Circulating fluidized bed boiler and steam turbine generator, (CFB). Conceptual designs were developed. Designs were based on approximately equivalent net electrical output for each technology. A base case of 310 MWe net for each technology was established. Sensitivity analyses at other net electrical output sizes varying from 220 MWe's to 1770 MWe's were also performed. 4 figs., 9 tabs.

A discussion of the offsite effective dose equivalents reported for 1988 SRS releases serves as the basis for this report. Detailed analyses of atmospheric and liquid release trends and their consequences in terms of relative importance among facilities, radionuclides, and exposure pathways have also been included. Releases of radioactivity to the atmosphere were generally lower in 1988 than in 1987. No major unplanned tritium releases were recorded during the year. However, there were three inadvertent releases of Pu-238 from F Area in January, March and October of 160, 32 and 83 uCi, respectively. Radioactive releases to onsite streams from direct discharges and seepage basin migration decreased in 1988. However, as a result of a decrease in the flow rate of the Savannah River in 1988, higher offsite doses were reported. The maximum individual dose, conversely, was down from 1987. This decrease reflected the fact that the maximum individual dose is most significantly affected by the cesium concentration in fish. In terms of largest contributors to dose, the releases were dominated by tritium, Cs-137 and to a much lesser extent Sr-90. With respect to the offsite population, doses from atmospheric releases are generally higher than those from liquid releases, and this …

The zero degree excitation function for ({pi}{sup +}, {pi}{sup -}) is calculated for pion energies of 300 to 1400 MeV assuming a sequential mechanism. The cross section around 1225 MeV is 10{sup 4} smaller than at 800 MeV. Experiments at this energy should be ideal for searches for effects due to exchange currents, and other non-conventional mechanisms. 15 refs.

Characteristics of the delayed-fission decay mode in light americium nuclei have been investigated. Measurements on the unknown isotopes {sup 230}Am and {sup 236}Am were attempted, and upper limits on the delayed-fission branches of these nuclei were determined. Evidence of the existence of {sup 236}Am was observed in radiochemical separations. Total kinetic energy and mass-yield distributions of the electron-capture delayed-fission mode were measured for {sup 232}Am (t{sub 1/2} = 1.31 {plus minus} 0.04 min) and for {sup 234}Am (t{sub 1/2} = 2.32 {plus minus} 0.08 min), and delayed-fission probabilities of 6.9 {times} 10{sup {minus}4} and 6.6 {times} 10{sup {minus}5}, respectively, were determined. The total kinetic energy and the asymmetric mass-yield distributions are typical of fission of mid-range actinides. No discernible influence of the anomalous triple-peaked mass division characteristic of the thorium-radium region was detected. Measurements of the time correlation between the electron-capture x-rays and the subsequent fission conform that the observed fissions arise from the electron-capture delayed-fission mechanism. Delayed fission has provided a unique opportunity to extend the range of low-energy fission studies to previously inaccessible regions. 71 refs., 44 figs., 13 tabs.

Contents of this report include: EIA projections of coal supply and demand which covers forecasted coal supply and transportation, forecasted coal demand by consuming sector, and forecasted coal demand by the electric utility sector; and policy discussion.

The V-7.2Cr-14.5Ti, V-9.2Cr-4.9Ti, V-9.9Cr-9.2Ti, V-13.5Cr-5.2Ti, V-4.1Cr-4.3Ti, Vanstar-7, V-4.6Ti, V-17.7Ti, and V-3.1Ti-(0.5-1.0)Si alloys were evaluated for use as structural material in a fusion reactor. The alloys were evaluated on the basis of their yield strength, swelling resistance, resistance to hydrogen and irradiation embrittlement, and compatibility with a lithium reactor coolant. On the basis of these evaluations, the V-7.2Cr-14.5Ti, V-9.2Cr-4.9Ti, V-9.9Cr-9.2Ti, V-13.5Cr-5.2Ti, Vanstar-7, and V-3.1Ti-(0.5-1.0)Si alloys are considered unacceptable for structural material in a fusion reactor, whereas the V-4.1Cr-4.3Ti, V-4.6Ti, and V-17.7Ti alloys are recommended for more intensive evaluation. The V-7Cr-5Ti alloy may have the optimum combination of strength, DBTT, swelling rate, and lithium dissolution rate for a structural material in a fusion reactor. 4 refs., 6 figs., 4 tabs.

The Superconducting Super Collider, to be built in Texas, will provide an energy of 40 TeV from colliding proton beams. This energy is twenty times higher than currently available from the only other cryogenic collider, the Fermilab Tevatron, and will allow experiments that can lead to a better understanding of the fundamental properties of matter. The energy scale and the size of the new machine pose intriguing challenges and opportunities for the its vacuum systems. The discussion will include the effects of synchrotron radiation on cryogenic beam tubes, cold adsorption pumps for hydrogen, methods of leak checking large cryogenic systems, the development of cold beam valves, and radiation damage to components, especially electronics. 9 figs., 1 tab.

This paper discusses the following topics on cooling water design on the superconducting super collider; low conductivity water; industrial cooling water; chilled water systems; and radioactive water systems. (LSP)

The Superconducting Super Collider project will require the construction of nearly 9400 magnets of which 1800 are quadrupoles each 4.32 m long. These magnets use niobium-titanium superconducting cables with a current of 6500 A/turn to get a high magnetic field gradient and focalize the particles beam. After the QA and QB quadruples, a new quadrupole, called QC, has been conceived. It is a 4 cm bore accelerator type, with a new collar design and a field gradient of 214 T/m that is lower than the one in QA. The new collar design consists mainly in a two pieces symmetrical and thicker collar which provides a complete support to the coils. This paper will analyze the magnetic field and the stress and strain distribution. The results show that this collar is a big improvement over the previous, especially in terms of stiffness, which is not explained only by the thicker collar but also by a different pole angle. 4 refs.

The International Thermonuclear Experimental Reactor (ITER) team is completing the second year of a three-year conceptual design phase. The purpose of ITER is to demonstrate the scientific and technological feasibility of fusion power. It is to demonstrate plasma ignition and extended burn with steady state as the ultimate goal. In so doing, it is to provide the physics data base needed for a demonstration tokamak power reactor and to demonstrate reactor-relevant technologies, such as high-heat-flux and nuclear components for fusion power. To meet these objectives, many design compromises had to be reached by the participants following a careful review of the physics and technology base for fusion. The current ITER design features a 6-m major radius, a 2.15-m minor radius and a 22-MA plasma current. About 330 volt-seconds in the poloidal field system inductively drive the current for hundreds of seconds. Moreover, about 125 MW of neutral-beam, lower-hybrid, and electron-cyclotron power are provided for steady-state current drive and heating all these systems are discussed in this paper. 3 refs., 6 figs., 7 tabs.

A material-balance flowsheet for ash-heel processing has been prepared. The major process features are (1) reduction of Pu into a calcium-zinc alloy and selective electrolytic recovery of the Pu from the alloy, (2) removal of americium as a waste, (3) concentration of nontransuranic tramp elements in a zinc waste, (4) removal of oxygen and recovery of calcium by electrolysis of CaO, and (5) zinc recycle by evaporation. Based on this idealized flowsheet, the mass of solid waste is only 62% of that of the original residue. This is accomplished by recycling virtually all the reagents and discarding the oxygen as CO and CO{sub 2}. The pyrochemical recovery of Pu from incinerator ash heel from the Rocky Flats Plant was investigated. During this period, zinc-calcium alloys were used to reduce the PuC{sub 2} in the ash. Reduction of ash heel has been attempted with zinc-calcium alloys containing 2, 6, and 10 wt% calcium after the reduction. These resulted in extractions of 95%, 97%, and 99.5%, respectively, of the Pu from the salt. Following exposure of the reduction alloy to a ZnCl{sub 2}-bearing salt, the Pu was removed effectively from the alloy; however, the Pu recovered in the salt did not complete …

Recent results from the Mark III experiment on weak decays of charmed mesons are presented. Measurements of the resonant substructure of D{sup 0} {yields} K{sup {minus}}{pi}{sup +}{pi}{sup {minus}}{pi}{sup +} decays, the first model independent result on D{sub s} {yields} {phi}{pi}{sup +}, as well as limits on D{sub s} {yields} {eta}{pi}{sup +} and D{sub s} {yields} {eta}{prime}{pi}{sup +} are described. The implications of these new results are also discussed. 37 refs., 7 figs., 4 tabs.