The effect of elongation on minimum-cost devices is investigated for elongations ranging from 2 to 3. The analysis, carried out with the TETRA tokamak systems code, includes the effects of elongation on both physics (plasma beta limit) and engineering (poloidal field coil currents) issues. When ignition is required, the minimum cost occurs for elongations from 2.3 to 2.9, depending on the plasma energy confinement scaling used. Scalings that include favorable plasma current dependence and/or degradation with fusion power tend to have minimum cost at higher elongation (2.5-2.9); scalings that depend primarily on size result in lower elongation (/approximately/2.3) for minimum cost. For design concepts that include steady-state current-driven operation, minimum cost occurs at an elongation of 2.3. 12 refs., 13 figs.

There has been considerable interest in the complexation of metals and other cations by natural humic and fulvic acids, as well as synthetic polyelectrolytes. In order to explain the binding observed for metals, and other species by organic polyelectrolytes, steric effects have been proposed. In this work, the effects of pH changes in aqueous solution on two synthetic polyelectrolytes, polymaleic acid (PMA) and polyacrylic acid (PAA), have been examined by laser Raman spectroscopy and turbidity measurements. These results are compared to Fourier-transform infrared (FTIR) and (/sup 13/C) nuclear magnetic resonance (NMR) spectra for solid samples of PMA, PAA, and fulvic and humic acids. Two types of carboxylic acid groups were detected for PMA in aqueous solution. Crystallization of PMA in a narrow pH range was observed. These data are consistent with strong intramolecular hydrogen bonding occurring in PMA at a pH of approximately 4. This implication of these results on the use of these compounds as models for fulvic and humic acids is discussed. 27 refs., 3 figs., 1 tab.

Models based on general equations for the excess Gibbs energy of the aqueous fluid provide thermodynamically consistent structures for evaluating and predicting aqueous electrolyte properties. These equations yield other quantities upon appropriate differentiation, including osmotic and activity coefficients, excess enthalpies, heat capacities, and volumes. For this reason a wide array of experimental data are available from which model parameters and their temperature or pressure dependence can be evaluated. For systems of moderate concentration, the most commonly used model at present is the ion-interaction approach and coworkers. For more concentrated solutions, including those extending to the fused salt, an alternate model based on a Margules-expansion and commonly used for nonelectrolytes was proposed. We discuss these two models and give examples of parameter evaluations for some geologically relevant systems to high temperatures and pressures; also we show applications of the models to calculations of solubility equilibria.

Three-quarters of DOE's Conservation R and D funds have been devoted to technology research and development: basic and applied research, exploratory R and D, engineering feasibility studies, pilot-scale prototype R and D, and technology demonstration. Non R and D projects have involved technology assessment program planning and analysis, model development, technology transfer and consumer information, health effects and safety research, and technical support for rule making. The success stories summarized in this compendium fall into three general categories: Completed Technology Success Stories, projects that have resulted in new energy-saving technologies that are presently being used in the private sector; Technical Success Stories, projects that have produced or disseminated important scientific/technical information likely to result in future energy savings; Program Success Stories, non-R and D activities that have resulted in nationally significant energy benefits. The Energy Conservation research and development program at DOE is managed by the Office of Conservation under the direction of the Deputy Assistant Secretary for Conservation. Three subordinate Program Offices correspond to the buildings, transportation, and industrial end-use sectors. A fourth subordinate Program Office/endash/Energy Utilization Research/endash/sponsors research and technical inventions for all end-use sectors.

A new version of a Two-Beam Accelerator is proposed in which in each period of the drive structure a very small input microwave signal is amplified to a large power level and then completely removed and transferred to the accelerating structure. In this manner a number of difficulties with the original version are eliminated or greatly relieved; namely, rf phase and amplitude sensitivity, growth of sidebands, and rf manipulation (removal of the microwaves from the drive structure, and transmission of microwave power through the accelerating cavities). 11 refs., 6 figs., 2 tabs.

We report on the design of silicon PIN diode array hybrids for use as charged particle detectors. A brief summary of the need for vertex detectors is presented. Circuitry, block diagrams and device specifications are included. 8 refs., 7 figs., 1 tab.

Nuclear safeguards applied by the International Atomic Energy Agency (IAEA) are one element of the non-proliferation regime'', the collection of measures whose aim is to forestall the spread of nuclear weapons to countries that do not already possess them. Safeguards verifications provide evidence that nuclear materials in peaceful use for nuclear-power production are properly accounted for. Though carried out in cooperation with nuclear facility operators, the verifications can provide assurance because they are designed with the capability to detect diversion, should it occur. Traditional safeguards verification measures conducted by inspectors of the IAEA include book auditing; counting and identifying containers of nuclear material; measuring nuclear material; photographic and video surveillance; and sealing. Novel approaches to achieve greater efficiency and effectiveness in safeguards verifications are under investigation as the number and complexity of nuclear facilities grow. These include the zone approach, which entails carrying out verifications for groups of facilities collectively, and randomization approach, which entails carrying out entire inspection visits some fraction of the time on a random basis. Both approaches show promise in particular situations, but, like traditional measures, must be tested to ensure their practical utility. These approaches are covered on this report. 15 refs., 16 figs., 3 …

Major differences between fusion drivers and traditional accelerators include the following. The final beam current needed (/approximately/20 kA in a short pulse) is very much larger for a driver; such beams are dominated by repulsive space-charge effects since, even at 10 GeV, the ions are non-relativistic (v/c = 0.3). Also, the optical quality of the beams (called emittance by accelerator people) must be extremely good to ensure a suitably small focal spot at the pellet. Two schemes, one with a rf linac and storage rings, the other with a single-pass current-amplifying induction linac, are under study, the latter exclusively in the US. The induction linac approach lends itself to an examination in a sequence of scaled-down laboratory experiments since the most difficulties are expected to occur at the low energy end. Experiments and simulation have centered on a study of the transverse and longitudinal control of space-charge-dominated beams which are best described in terms of a non-neutral plasma rather than the traditional single-particle dynamics picture. An understanding of the high-current instability limits is required for arriving at a safe driver design. The final on-target beam current is so high that it must be carried in 16 separate focusing channels leading …

A screening study was performed on a laboratory scale downfired combustor to determine the effect of various variables on the effectiveness of the reburning process as a technique for NO{sub x} abatement. The objective was to define optimum conditions under which reburning can be used and to be able to compare the reburning performance of our combustor to that reported by others. For this purpose, a statistically designed parametric investigation was conducted to determine how a set of controlled variables (primary and secondary stoichiometric ratios, location of the reburn zone and primary fuel load) would affect the reduction in NO emissions in a classical reburning configuration. Also, the effects of other variables (NO in the primary zone, temperatures in the primary, reburn and burnout zones and the residence time in the reburn zone) were also investigated. No optimum configuration was identified in this study. Nevertheless, this study provides insight into the parameters associated with reburning.

Over the past few years several proposals have been prepared to investigate the potential hazard of ferrocyanide-nitrate reactions that may occur in some Hanford waste tanks. In 1988 Westinghouse Hanford Company (WHC) decided to perform some of the suggested experimental work. Based on the proposal submitted in July, 1988, it was agreed to do a portion of the work during FY 1988. This report summarizes the results of that work, provides a preliminary analysis of the results, and includes recommendations for further study. The work completed consists of a brief literature search, preparation and analysis of several cesium nickel ferrocyanide, Cs{sub 2}NiFe(CN){sub 6}, oxdiation studies using Differential Scanning Calorimetry (DSC) and Thermogravimetry (TG), and small scale explosion tests.

This Closure Plan for Solid Waste Storage Area 6 (SWSA 6) a disposal area for low-level radioactive wastes and hazardous materials, of the US Department of Energy (DOE) Oak Ridge National Laboratory (ORNL) describes how portions of SWSA 6 will be closed under Resource Conservation and Recovery Act (RCRA) Interim Status per 40 CFR 265 Subpart G [TN Rule 1200-1-11-.05(7)]. An overview is provided of activities necessary for final closure and corrective measures for all of SWSA 6. Results of surface waters and groundwater sampling are provided.

The primary objective of the Special Applications thermoelectric module development program is to design, develop and demonstrate the performance of a module which provides a significant thermoelectric conversion efficiency improvement over available technology for low power, relatively high voltage RTGS intended for terrestrial applications. ``Low power`` can be construed as an RTG power output of 10 watts or less, and ``high voltage`` can be considered as a load voltage of 5 volts or greater. In particular, the effort is to improve the system efficiency characteristic of the state-of-the-art bismuth telluride-based RTG system (e.g., Five-Watt RTG and Half-Watt RTG), typically 3 to 4%, to the range of 6% or better. This increase in efficiency will also permit reductions in the weight and size of RTGs in the low power range.

The basic goal of the Limestone Injection Multistage Burner (LIMB) demonstration is to extend LIMB technology development to a full-scale application on a representative wall-fired utility boiler. The successful retrofit of LIMB to an existing boiler is expected to demonstrate that (a) reductions of 50 percent or greater in SO and NO emissions can be achieved at a fraction of the cost of add-on FGD systems, (b) boiler reliability, operability, and steam production can be maintained at levels existing prior to LIMB retrofit, and (c) technical difficulties attributable to LIMB operation, such as additional slagging and fouling, changes in ash disposal requirements, and an increased particulate load, can be resolved in a cost-effective manner. The primary fuel to be used will be an Ohio bituminous coal having a nominal sulfur content of 3 percent or greater.

Added mass values for plates partially submerged in water are obtained from a series of experiments. Both solid and perforated plates are tested. Each plate is circular and is constrained to move as a piston in a horizontal cylindrical container. Water flow past the perimeter of a plate is controlled by the narrow gap between the container and the edges of the plate. The perforated plate has an equilateral triangular pitch pattern of circular holes. The plate vibrates as a rigid mass on a flexible suspension system. The plate excitation is produced with an impact hammer, although shaker excitation is used to confirm natural frequencies. The natural frequency of the plate is measured for seven water levels in the container ranging from empty to full. For each water level, added mass is computed using the ratio of the natural frequency in air to the natural frequency in water. The added mass for fully submerged plates is compared to published experimental and theoretical results.

The design of future Engineering Test Reactor (ETR) to demonstrate ignition is complicated by the uncertainties in the projected database for ignited plasmas. Application of uncertainty analysis to ETR design utilizing a figure-of-merit defined as the probability of ignition is presented. Performance evaluation from the uncertainty analysis in density-temperature space can locate an optimum operating window for ignition. 11 refs., 5 figs., 3 tabs.

This in the third quarterly technical progress report for DE-AI2287PC79660 covering the period between 1 May and 31 July 1988. During this reporting period, the firing test of Dry Ultrafine Coal (DUC) in the 0.15 MB/H exploratory model has continued. Sufficient experience and insight have been accumulated to help finalize the design of the 0.6 MB/H experimental model. Fabrication of the 0.6 MB/H model in 33% complete. A Coal-Water Fuel (CWF) loop for firing tests and an apparatus for testing CWF nozzle spray patterns are also 33% complete. A now test facility which includes the flue gas cleaning facility (described in our first quarterly progress report) is operational. We are now able to conduct independent tests on both the 0.15 and 0.6 MB/H models without disruption to either model. Current efforts have been concentrated in permanently installing test apparatus/equipment in the now test facility area. CWF tests in the 0. 15 MB/H model and DUC tests in the 0. 6 MB/H model are expected to begin in September 1988.

The basic goal of the Limestone Injection Multistage Burner (LIMB) demonstration is to extend LIMB technology development to a full-scale application on a representative wall-fired utility boiler. The successful retrofit of LIMB to an existing boiler is expected to demonstrate that (a) reductions of 50 percent or greater in SO and NO emissions can be achieved at a fraction of the cost of add-on FGD systems, (b) boiler reliability, operability, and steam production can be maintained at levels existing prior to LIMB retrofit, and (c) technical difficulties attributable to LIMB operation, such as additional slagging and fouling, changes in ash disposal requirements, and an increased particulate load, can be resolved in a cost-effective manner. The primary fuel to be used will be an Ohio bituminous coal having a nominal sulfur content of 3 percent or greater.

Conceptual design of a bright electron injector for the 1 GeV high gradient test experiment. envisaged by the LLNL-SLAC-LBL collaboration on the Relativistic Klystron is presented. The design utilizes a high-brightness laser-driven RF photocathode electron gun, similar to the pioneering LANL early studies in concept (different parametrically however), together with achromatic magnetic bunching and transport systems and diagnostics. The design is performed with attention to possible use in an FEL as well. A simple but realistic analytic model including longitudinal and transverse space-charge and RF effects and extensive computer simulation form the basis of the parametric choice for the source. These parameters are used as guides for the design of the pico-second laser system and magnetic bunching section.

In the final design of the DO Detector, the three cryostats (CC and both EC's) will ride on a pair of hardened ways so as to move the EC's out and away from the CC cryostat to provide access between cryostats for repairs and such. Each of the cryostats sits on a carriage which has a pair of Tychoway rollers placed at each corner to roll on the hardened ways. When in position, the full weight of the cryostats is to be relieved from the rollers with the use of a pair of 90-ton jacks flanking the pair of rollers at each corner. Due to confined space, these jacks had to be custom made, triple cylinder, single block units. Five manufacturers were presented with the problem and three came back with proposals. All three satisfied the technical requirements but Ram-Pac International was easily the lowest priced.

This document details the underlying support programming and structures that support the INTELLECT and KBMS products at the Savannah River Facility. The target audience for this document includes INTELLECT System Administrators, INTELLECT programmers and developers, and VM Systems Programmers.

This report describes technical progress during the past twelve months on DOE Contract DE-FG-87ER25030 and requests support for the third year. The project involves study of the theoretical properties and computational performance of techniques that solve linear and nonlinear programs by means of nonlinear transformations. The group at the Systems Optimization Laboratory (SOL) were the first to recognize the connection between Karmarkar`s projective method and the logarithmic barrier method. It is now generally recognized that essentially all interior-point methods for linear programming inspired by Karmarkar`s method are closely related to application of Newton`s method to a sequence of barrier functions. Each barrier function is defined from the objective function and a barrier term that is infinite along the boundary of the feasible region. As the weight on the barrier term is reduced to zero, the solution of the subproblem becomes closer to the solution of the original problem.

The US Department of Energy (DOE) has revised its low-level radioactive waste (LLW) management requirements and guidelines for waste generated at its facilities supporting defense missions. Specifically, draft DOE Order 5820.2A, Chapter 3 describes the purpose, policy, and requirements necessary for the management of defense LLW. The draft DOE policy calls for LLW operations to be managed to protect the health and safety of the public, preserve the environment, and ensure that no remedial action will be necessary after termination of operations. The basic approach used by DOE is to establish overall performance objectives, in terms of groundwater protection and public radiation dose limits, and to require site-specific performance assessments to determine compliance. As a result of these performance assessments, each site will develop waste acceptance criteria that define the allowable quantities and concentrations of specific radioisotopes. Additional limitations on waste disposal design, waste form, and waste treatment will also be developed on a site-specific basis. As a key step in the site-specific performance assessments, an evaluation must be conducted of potential radiation doses to intruders who may inadvertently move onto a closed DOE LLW disposal site after loss of institutional controls. This report (1) describes the types of intruder …

The objective of this program is to provide an overall evaluation of a novel process concept for mild gasification by completing work in three major tasks: (1) Laboratory-Scale Experiments, (2) Bench-Scale Tests, and (3) Proof-of-Concept Tests and Evaluation (optional). During this quarter, experimental work involving zinc chloride as a potential recirculating catalyst for coal, initiated in the previous quarter, was continued. The design of an all-quartz laboratory-scale isothermal free-fall reactor was completed, and construction was begun. One free-fall experiment was performed in an existing stainless-steel free-fall reactor with methanol-treated Illinois No. 6 high-volatile bituminous coal. 1 ref., 2 figs., 2 tabs.

This paper gives an overview on high energy electron (positron) polarimeters by describing in more detail the plans for the LEP polarimeter and the CEBAF polarimeters. Both LEP and CEBAF will have laser polarimeters. In addition CEBAF will be equipped with a Moller polarimeter (for currents below 1 micro-amp).