This workshop on Siberian snakes for the SSC was held to discuss the technical feasibility of polarized beams at the SSC. Only the 20-TeV collider ring was discussed with the prospect that the polarized beam source, the linac, and the boosters have fewer technical problems. More specifically, the major issue of the miniworkshop was to give an answer to the questions (1) how many Siberian snakes are needed and (2) what alignment tolerances are required, given the snakes. No attempt was made to address the issues of whether polarized beams will benefit the SSC high energy physics program or what the cost will be. As for the two questions above, workshop participants concluded that the required number of snake pairs is around 10 and the alignment tolerance is less than 100 microns. This tight tolerance is of great concern and has to be confirmed by other means such as computer simulation. One of the conclusions was that they should have a realistic lattice of the SSC which enables them to study it in more detail and to try computer simulations.

Automated Emergency Response (ER) systems are playing a greater role in providing prompt and reliable predictions of the impact of inadvertent releases of hazardous materials to the environment. Observed and forecast environmental and accident source term data are input into environmental transport and dispersion models to provide dosimetry estimates used as decision making aids for responding to emergencies. Several automated ER systems have been developed for US Federal Government facilities and many are available commercially. For such systems to be useful, they must reliably and consistently deliver a timely product to the decision makers. Evaluation of the entire ER system is essential to determine the performance that can be expected from the system during an emergency. Unfortunately, seldom are ER systems evaluated as a whole. Usually Quality Assurance programs evaluate the performance of individual components of the system. Most atmospheric pollution model evaluation methods usually involve an evaluation of the predictive performance of the transport and dispersion model when compared either with experimental tracer results or results from other models. Rarely, however, is the ability of the ER system to provide timely, reliable and consistent information evaluated. Such an evaluation is vital to determine the system performance during an emergency …

Conceptual design of a bright electron injector for the 1 GeV high gradient test experiment. envisaged by the LLNL-SLAC-LBL collaboration on the Relativistic Klystron is presented. The design utilizes a high-brightness laser-driven RF photocathode electron gun, similar to the pioneering LANL early studies in concept (different parametrically however), together with achromatic magnetic bunching and transport systems and diagnostics. The design is performed with attention to possible use in an FEL as well. A simple but realistic analytic model including longitudinal and transverse space-charge and RF effects and extensive computer simulation form the basis of the parametric choice for the source. These parameters are used as guides for the design of the pico-second laser system and magnetic bunching section.

This paper gives an overview on high energy electron (positron) polarimeters by describing in more detail the plans for the LEP polarimeter and the CEBAF polarimeters. Both LEP and CEBAF will have laser polarimeters. In addition CEBAF will be equipped with a Moller polarimeter (for currents below 1 micro-amp).

I discuss the current status of structure functions. Attention is given to the uncertainties in them and the implications of these uncertainties for experimental predictions. I indicate which experiments are capable of removing these uncertainties. 17 refs., 17 figs., 1 tab.

In this paper we study the effect of temperature on the release rate of readily soluble nuclides, as affected by a time-temperature dependent diffusion coefficient. In this analysis ground water fills the voids in the waste package at t = 0 and one percent of the inventories of cesium and iodine are immediately dissolved into the void water. Mass transfer resistance of partly failed container and cladding is conservatively neglected. The nuclides move through the void space into the surrounding rock under a concentration gradient. We use an analytic solution to compute the nuclide concentration in the gap or void, and the mass flux rate into the porous rock. 8 refs., 4 figs.

A specially designed confining pressure vessel is described that allows tensile samples to be tested under a superimposed confining hydrostatic pressure. Tests on samples of well characterized materials such as aluminum were used to verify the operation of the system, calibration of the internal load cell, and data reduction methods. The results of a series of exploratory tests done on the inert material 900-24 are described. 4 refs., 17 figs., 2 tabs.

The Heavy Ion Fusion Accelerator Research (HIFAR) program of the USDOE has for several years concentrated on developing linear induction accelerators as Inertial Fusion (IF) drivers. This accelerator technology is suitable for the IF application because it is readily capable of accelerating short, intense pulses of charged particles with good electrical efficiency. The principal technical difficulty is in injecting and transporting the intense pulses while maintaining the necessary beam quality. The approach used has been to design a system of multiple beams so that not all of the charge has to be confined in a single beam line. The beams are finally brought together in a common focus at the target. This paper will briefly present the status and future plans of the program, and will also briefly review systems study results for HIF. 2 refs., 5 figs.

We present a design concept and simulation of the performance of a compact x-ray, free electron laser driven by ultra-high gradient rf-linacs. The accelerator design is based on recent advances in high gradient technology by a LLNL/SLAC/LBL collaboration and on the development of bright, high current electron sources by BNL and LANL. The GeV electron beams generated with such accelerators can be concerted to soft x-rays in the range from 2--10 nm by passage through short period, high fields strength wigglers as are being designed at Rocketdyne. Linear light sources of this type can produce trains of picosecond (or shorter) pulses of extremely high spectral brilliance suitable for flash holography of biological specimens in vivo and for studies of fast chemical reactions. 12 refs., 8 figs., 4 tabs.

Extended non-linear BRS and Gauge transformations containing Lie algebra cocycles, and acting on non-abelian antisymmetric tensor fields are constructed in the context of free differential algebras. New topological invariants are given in this framework. 6 refs.

Groundwater monitoring is an important technical requirement in managing hazardous waste disposal facilities. The purpose of monitoring is to assess whether and how a disposal facility is affecting the underlying groundwater system. This paper focuses on the regulatory and technical aspects of the design, placement, and sampling of groundwater monitoring wells for hazardous waste disposal facilities. Such facilities include surface impoundments, landfills, waste piles, and land treatment facilities. 8 refs., 4 figs.

Equilibrium concentrations of hydrogen in vanadium-base alloys exposed to flowing lithium at temperatures from 350 to 550/degree/C in a forced-circulation loop were measured by residual gas analysis and the vacuum fusion method. Residual gas analysis and removal of material from the surface allowed a determination of the spatial hydrogen distribution in the alloys. These experimental results were compared with calculated thermodynamic distribution coefficients for hydrogen in the vanadium/lithium system. Small amounts of other solutes in the molten lithium and in the alloys affected the solubility, diffusivity, and resultant distribution of hydrogen. Thermodynamic calculations demonstrated the importance of major alloying elements to the partitioning of hydrogen. 12 refs., 5 figs., 2 tabs.

High energy neutral beams provide a promising method of heating and driving current in steady-state tokamak fusion reactors. As an example, we have made a conceptual design of a neutral beam system for current drive on the International Thermonuclear Experimental Reactor (ITER). The system, based on electrostatic acceleration of D/sup /minus// ions, can deliver up to 100 MW of 1.6 MeV D/sup 0/ neutrals through three ports. Radiation protection is provided by locating sensitive beamline components 35 to 50 m from the reactor. In an application to a 3300 MW power reactor, a system delivering 120 MW of 2-2.4 MeV deuterium beams assisted by 21 MW of lower hybrid wave power drives 25 MA and provides an adequate plasma power gain (Q = 24) for a commercial fusion power plant. 8 refs., 1 fig., 2 tabs.

Two ovens are described for the feed of vapor from solid materials in the LBL ECR source. A low temperature oven, operating up to 700 /degree/ C, has been used for Li, Mg, P, K, Ca, Ti and Bi. A high temperature oven operating up to 2000/degree/C, has been used for Sc, Fe, Ni, Cu, Ag, La and Tb. At the 1 e..mu..A level the charge states from the oven beams are very close to those from gases. 4 refs., 5 figs., 2 tabs.

In a continuation of the long-standing effort of the nuclear physics community to model atomic nuclei as droplets of a specialized nuclear fluid, we have developed a hydrodynamic model for simulating the collisions of heavy nuclei at relativistic speeds. Our model couples ideal relativistic hydrodynamics with a new Monte Carlo treatment of dynamic pion production and tracking. The collective flow for low-energy (200 MeV/N) collisions predicted by this model compares favorably with results from earlier hydrodynamic calculations which used quite different numerical techniques. Our pion predictions at these lower energies appear to differ, however, from the experimental data on pion multiplicities. In this case of ultra-relativistic (200 GeV/N) collisions, our hydrodynamic model has produced baryonic matter distributions which are in reasonable agreement with recent experimental data. These results may shed some light on the sensitivity of relativistic collision data to the nuclear equation of state. 20 refs., 12 figs.

This proceedings contains 20 technical papers and abstracts describing most of the research activities funded by the Department of Energy (DOE's) Geothermal Reservoir Technology Program, which is under the management of Marshall Reed. The meeting was organized in response to several requests made by geothermal industry representatives who wanted to learn more about technical details of the projects supported by the DOE program. Also, this gives them an opportunity to personally discuss research topics with colleagues in the national laboratories and universities.

The ability to cool superconductors with liquid nitrogen instead of liquid helium has opened the door to a wide range of research. The well known Meissner effect, which states superconductors are perfectly diamagnetic, suggests shielding applications. One of the drawbacks to the new ceramic superconductors is the brittleness of the finished material. Because of this drawback, any application which required flexibility (e.g., wire and cable) would be impractical. Therefore, this paper presents the results of a preliminary investigation into the shielding effectiveness of YBa/sub 2/Cu/sub 3/O/sub 7-x/ both as a composite and as a monolithic material. Shielding effectiveness was measured using two separate test methods. One tested the magnetic (near field) shielding, and the other tested the electromagnetic (far field) shielding. No shielding was seen in the near field measurements on the composite samples, and only one heavily loaded sample showed some shielding in the far field. The monolithic samples showed a large amount of magnetic shielding. 5 refs., 5 figs.

The definition phase for the International Thermonuclear Experimental Reactor (ITER) has been nearly completed, thus beginning a three-year design effort by teams from the European Community (EC), Japan, US, and USSR. Preliminary parameters for the superconducting magnet system have been established to guide more detailed design work. Radiation tolerance of the superconductors and insulators has been important because it sets requirements for the neutron-shield dimension and sensitively influences reactor size. Major levels of mechanical stress appear in the structural cases of the inboard legs of the toroidal-field (TF) coils. The winding packs of the TF coils include significant fractions of steel that provide support against in-plane separating loads, but they offer little support against out-of-plane loads unless shear-bonding of the conductors can be maintained. Heat removal from nuclear and ac loads has not limited the fundamental design, but it has nonnegligible economic consequences. 3 refs., 3 figs., 5 tabs.

The physics and engineering guidelines for the ITER device are shown to lead to viable and attractive operating points for a steady state tokamak power reactor. Non-inductive current drive is provided in steady state by high energy neutral beam injection in the plasma core, lower hybrid slow waves in the outer regions of the plasma and bootstrap current. Plasma gain Q (/equivalent to/fusion power/input power) in excess of 20 and average neutron wall loading, <GAMMA> approx. 2.0 MW/m/sup 2/ are predicted in a device with major radius, R/sub 0/ = 7.5 m and minor radius, a = 2.8 m. 15 refs., 3 figs., 3 tabs.

We are developing a new, second-order, monotone scheme for advection. DPDC (i.e., double-pass donor cell) is based on Smolarkiewicz&#x27; simple, positive definite method. Both schemes are multipass methods in which upstream approximations to the truncation error are subtracted from the equations. We describe two significant improvements to Smolarkiewicz&#x27; method. First, we use a local gauge transformation to convert the method from being positive definite to the stronger condition of being monotone. Second, we analytically approximate the sum of the corrections of all the passes to use in a single corrective pass. This increases the accuracy of the method, but does not increase the order of accuracy. We compare DPDC with van Leer&#x27;s method for advection of several different pulses in a constant velocity field. 5 refs., 4 figs.

The MHTGR is an advanced reactor concept being developed under a cooperative program involving the US Government, the nuclear industry, and the utilities. The design utilizes the basic HTGR features of ceramic fuel, helium coolant, and a graphite moderator. However, the specific size and configuration are selected to utilize the inherent characteristics of these materials to develop passive safety features that provide a significantly higher margin of safety than current generation reactors. The design meets the US Environmental Protection Agency's Protective Action Guidelines at the site boundary, hence precluding the need for sheltering or vacation of the public during any licensing basis event. This safe behavior is not dependent upon operator action and is insensitive to operator error. The MHTGR Licensing Plan agreed to with the US Nuclear Regulatory Commission (NRC) is discussed with particular attention to the framework of the preapplication review. The objective and scope of each key document prepared for the NRC review is presented. A summary is provided of the safety response to events challenging the functions relied on to retain radionuclides within the coated fuel particles. The regulatory interaction process and results are discussed through the NRC staff, NRC contractor, and ACRS reviews. 11 refs., …

This paper discusses the upgrades needed at Fermilab Tevatron facility to meet the future physics needs. Historical aspects are also discussed. 3 figs.

The work that has been done on the SSC dipole over the past year is summarized in this paper, which is divided into four sections: cable development and production, cryostat design, cold mass design, and model magnet testing. 13 refs., 2 figs., 7 tabs.

The track-size distribution on electrochemically etched CR-39 foils can be used to obtain some limited information on the incident neutron spectra. Track-size distributions on CR-39 foils can also be used to determine if the tracks were caused by neutrons or if they are merely background tracks (which have a significantly different track-size distribution). Identifying and discarding the high-background foils reduces the number of foils that must be etched. This also lowers the detection limit of the dosimetry system. We have developed an image analyzer program that can more efficiently determine the track density and track-size distribution, as well as read the laser-cut identification numbers on each foil. This new image analyzer makes the routine application of track-size distributions on CR-39 foils feasible. 2 refs., 3 figs.