A preliminary assessment was conducted to evaluate factors that may have been responsible for the vegetation damage that has occurred in groundwater seeps downslope from the F- and H-area seepage basins. The factors that were considered included altered hydrology, toxicity from hazardous chemical constituents associated with seepage basin operation, and toxicity from non-hazardous constituents associated with basin operation. It was concluded that the observed damage was not likely to have resulted from altered hydrologic conditions or hazardous constituents associated with basin operation. Insufficient information is currently available to determine definitively which of the non-hazardous constituents, alone or in concert, were responsible for the observed vegetation damage. The most likely explanation, however, is that elevated Na, pH, and conductivity is outcropping seep water are responsible for tree mortality. All three of these factors will return to ambient levels over a period of several years when basin operation ceases. Faster remediation can be achieved using lime at the seep line.

A screening study was performed on a laboratory scale downfired combustor to determine the effect of various variables on the effectiveness of the reburning process as a technique for NO{sub x} abatement. The objective was to define optimum conditions under which reburning can be used and to be able to compare the reburning performance of our combustor to that reported by others. For this purpose, a statistically designed parametric investigation was conducted to determine how a set of controlled variables (primary and secondary stoichiometric ratios, location of the reburn zone and primary fuel load) would affect the reduction in NO emissions in a classical reburning configuration. Also, the effects of other variables (NO in the primary zone, temperatures in the primary, reburn and burnout zones and the residence time in the reburn zone) were also investigated. No optimum configuration was identified in this study. Nevertheless, this study provides insight into the parameters associated with reburning.

The NK Muon Beam will be a modified version of the existing NT beam line. The decision to employ a modified version of the NT beam line was made based on considerations of cost and availability of the beam line. Preliminary studies considered use of other beam lines, e.g., the NW beam line, and even of moving the bubble chamber with its superconducting coils but were rejected for reasons such as cost, personnel limitations, and potential conflicts with other users.

Our work on this contract was divided into two major categories; two thirds of the total effort was in support of the Laboratory Microfusion Facility (LMF), and one third of the effort was in support of Inertial Confinement Fusion (ICF) commercial reactors. This final report includes copies of the formal reports, memoranda, and viewgraph presentations that were completed under this contract.

Nuclear safeguards applied by the International Atomic Energy Agency (IAEA) are one element of the non-proliferation regime'', the collection of measures whose aim is to forestall the spread of nuclear weapons to countries that do not already possess them. Safeguards verifications provide evidence that nuclear materials in peaceful use for nuclear-power production are properly accounted for. Though carried out in cooperation with nuclear facility operators, the verifications can provide assurance because they are designed with the capability to detect diversion, should it occur. Traditional safeguards verification measures conducted by inspectors of the IAEA include book auditing; counting and identifying containers of nuclear material; measuring nuclear material; photographic and video surveillance; and sealing. Novel approaches to achieve greater efficiency and effectiveness in safeguards verifications are under investigation as the number and complexity of nuclear facilities grow. These include the zone approach, which entails carrying out verifications for groups of facilities collectively, and randomization approach, which entails carrying out entire inspection visits some fraction of the time on a random basis. Both approaches show promise in particular situations, but, like traditional measures, must be tested to ensure their practical utility. These approaches are covered on this report. 15 refs., 16 figs., 3 …

A screening study was performed on a laboratory scale downfired combustor to determine the effect of various variables on the effectiveness of the reburning process as a technique for NO{sub x} abatement. The objective was to define optimum conditions under which reburning can be used and to be able to compare the reburning performance of our combustor to that reported by others. For this purpose, a statistically designed parametric investigation was conducted to determine how a set of controlled variables (primary and secondary stoichiometric ratios, location of the reburn zone and primary fuel load) would affect the reduction in NO emissions in a classical reburning configuration. Also, the effects of other variables (NO in the primary zone, temperatures in the primary, reburn and burnout zones and the residence time in the reburn zone) were also investigated. No optimum configuration was identified in this study. Nevertheless, this study provides insight into the parameters associated with reburning.

The Morgantown Energy Technology Center (METC) of the US Department of Energy (DOE) is interested in the potential of using a two-step process for regenerating the zinc ferrite desulfurization sorbent. In the first regeneration step, a gas mixture consisting of 12 percent SO{sub 2}, 2 percent O{sub 2}, and 86 percent N{sub 2} is used to convert zinc and iron sulfides to their sulfate forms using a sorbent bed inlet temperature of about 850{degrees}F (454{degrees}C). For the second step, the temperature is raised to about 1400{degrees}F (760{degrees}C), and the sulfates are decomposed to oxides with the concurrent release of sulfur dioxide. The same gas composition used for first step is also used for the second step. The proposed technique would require no steam and also has the advantage of producing a regeneration gas rich in sulfur dioxide. In a commercial operation, recirculating regeneration gas would be supplemented with air as required to supply the necessary oxygen. A bleed stream from regeneration (concentrated SO{sub 2} gas in nitrogen) would constitute feed to sulfur recovery.

The IGCC of the U.S. government was created under the intent of Public Law 93-410 (1974) to serve as a forum for the discussion of Federal plans, activities, and policies that are related to or impact on geothermal energy. Eight Federal Departments were represented on the IGCC at the time of this meeting. The main presentations in this report were on: Department of Energy Geothermal R&D Program, the Ormat binary power plant at East Mesa, CA, Potential for direct use of geothermal at Defense bases in U.S. and overseas, Department of Defense Geothermal Program at China Lake, and Status of the U.S. Geothermal Industry. The IGCC briefing books and minutes provide a historical snapshot of what development and impact issues were important at various time. (DJE 2005)

Each of the seven tasks defined under this contract are discussed here. They include: (1) design support for an x-ray spectrometer for the ``Panchuela`` down-hole experiment at the Nevada Test Site; (2) development and demonstration of an optical alignment method for aligning the 180 degree bend achromatic magnetic section of the Ground Test Accelerator; (3) development of magnet support and manipulation concepts for the 17 magnets of the Ground Test Accelerator; (4) design support for the triplett magnet telescope assembly and its support structure (Neutral Particle Beam Program); (5) design and support for the beam diagnostic system for the Argonne Particle Beam experiment; (6) conceptual design for the modification of an Antares Marx tank for use in the Aurora Laser Program; and (7) design of poloidal gap for the Los Alamos ZTH reversed-field pinch machine.

The Morgantown Energy Technology Center (METC) of the US Department of Energy (DOE) is interested in the potential of using a two-step process for regenerating the zinc ferrite desulfurization sorbent. In the first regeneration step, a gas mixture consisting of 12 percent SO{sub 2}, 2 percent O{sub 2}, and 86 percent N{sub 2} is used to convert zinc and iron sulfides to their sulfate forms using a sorbent bed inlet temperature of about 850{degrees}F (454{degrees}C). For the second step, the temperature is raised to about 1400{degrees}F (760{degrees}C), and the sulfates are decomposed to oxides with the concurrent release of sulfur dioxide. The same gas composition used for first step is also used for the second step. The proposed technique would require no steam and also has the advantage of producing a regeneration gas rich in sulfur dioxide. In a commercial operation, recirculating regeneration gas would be supplemented with air as required to supply the necessary oxygen. A bleed stream from regeneration (concentrated SO{sub 2} gas in nitrogen) would constitute feed to sulfur recovery.

Gold transmission diffraction gratings used for x-ray spectroscopy must sometimes be rotationally aligned to the axis of a diagnostic instrument to within sub-milliradian accuracy. We have fabricated transmission diffraction gratings with high line-densities (grating period of 200 and 300 nm) using uv holographic and x-ray lithography. Since the submicron features of the gratings are not optically visible, precision alignment is time consuming and difficult to verify in situ. We have developed a technique to write an optically visible alignment pattern onto these gratings using a scanning electron microscope (SEM). At high magnification (15000 X) several submicron lines of the grating are observable in the SEM, making it possible to write an alignment pattern parallel to the grating lines in an electron-beam-sensitive coating that overlays the grating. We create an alignment pattern by following a 1-cm-long grating line using the SEM's joystick-controlled translation stage. By following the same grating line we are assured the traveled direction of the SEM electron beam is parallel to the grating to better than 10 ..mu..radian. The electron-beam-exposed line-width can be large (5 to 15 ..mu..m wide) depending on the SEM magnification, and is therefore optically visible. The exposed pattern is eventually made a permanent feature …

None

Memorandum addressed to Captain W. R. Rollins of the Dallas Police Department's Intelligence Division. In the memorandum, Jack L. Beavers states that the Midland County District Attorney's Office requested information regarding former officer Roscoe Anthony White. Case notes, many of them handwritten, accompany the memorandum.