This document contains the proceeding of a Workshop on Facility Design that was held between the United States Department of Energy and the United Kingdom Atomic Energy Authority, Albuquerque, New Mexico, October 27--29, 1986. The intention of the workshop was to display relevant design criteria and to demonstrate for various US and UK facilities, current and projected criteria and how these criteria have been satisfied by facility design. Specific examples concern small plants, large plants, and waste stores.

For the purpose of providing recommended design assumptions for TRUPACT-2, gas generation within the TRU waste containers and the potential effects resulting from the absence of continuous venting of the TRUPACT-2 are considered in this report. The recommended assumptions are based on the best current state of knowledge to conservatively represent the potential gas generation loads for the TRUPACT-2.

GEONET is a database system developed at the Stanford Linear Accelerator Center for the alignment of the Stanford Linear Collider. It features an automated data flow, ranging from data collection using HP110 handheld computers to processing, storing and retrieving data and finally to adjusted coordinates. This paper gives a brief introduction to the SLC project and the applied survey methods. It emphasizes the hardware and software implementation of GEONET using a network of IBM PC/XT's. 14 refs., 4 figs.

This report sets forth the plans for the Mathematics and Computer Science Division during the next five years. These plans build on the Division's strong research programs in applied analysis, computational mathematics, software methodology, and advanced computing. The report addresses five major issues: research programs, research environment, dissemination of research techniques, initiatives, and resource projections.

The concurrent acquisition of flow-induced vibration (FIV) test data for several configurations of an industrial-size shell-and-tube heat exchanger made possible this evaluation of the HXVA method for six cases. Recommendations to improve the prediction capability were made, with priority on the excitation mechanism for dense fluid flows with non-uniform velocity distributions.

This project was designed to investigate the properties of the rare-earth phosphate glasses CeO{sub 2}-P{sub 2}O{sub 5} and Pr{sub 2}O{sub 3}-P{sub 2}O{sub 5} for potential use as radioactive waste glasses. The research involved determination of the glass-forming region, loading capacity, and optimum processing parameters of the glasses. Structural studies of the unloaded host glasses and glasses loaded with simulated waste elements were to be done using Raman, infrared and infrared reflection spectroscopy. Leach testing and spectroscopic studies of the corroded surfaces were also to be performed.

Materials from an OTA Senior Management Retreat including memoranda, summaries, and discussion points for previous or upcoming studies and programs. The retreat was held from November 12-14, 1986.

None

LEED multiple scattering theory is briefly summarized, and aspects of electron scattering with particular significance to experimental measurements such as electron beam coherence, instrument response and phonon scattering are analyzed. Diffuse LEED experiments are discussed. New techniques that enhance the power of LEED are described, including a real-time video image digitizer applied to LEED intensity measurements, along with computer programs to generate I-V curves. The first electron counting LEED detector using a ''wedge and strip'' position sensitive anode and digital electronics is described. This instrument uses picoampere incident beam currents, and its sensitivity is limited only by statistics and counting times. Structural results on new classes of surface systems are presented. The structure of the c(4 x 2) phase of carbon monoxide adsorbed on Pt(111) has been determined, showing that carbon monoxide molecules adsorb in both top and bridge sites, 1.85 +- 0.10 A and 1.55 +- 0.10 A above the metal surface, respectively. The structure of an incommensurate graphite overlayer on Pt(111) is analyzed. The graphite layer is 3.70 +- 0.05 A above the metal surface, with intercalated carbon atoms located 1.25 +- 0.10 A above hollow sites supporting it. The (2..sqrt..3 x 4)-rectangular phase of benzene and carbon …

One example of basic and applied research at LLNL that has produced major, highly visible scientific and engineering advances has been the research related to controlled fusion energy. Continuing experimentation at LLNL and elsewhere is likely to demonstrate that fusion is a viable, inexhaustible alternative source of energy. Having conducted major fusion energy experiments for over 30 years at LLNL, it scientists and engineers recognized the enormous challenges that lay ahead in this important endeavor. To be successful, it was clear that collaborative efforts with universities, private industry, and other national laboratories would need to be greatly expanded. Along with invention and scientific discovery would come the challenge of transferring the myriad of new technologies from the laboratories to the private sector for commercialization of the fusion energy process and the application of related technologies to yet unimagined new industries and products. Therefore, using fusion energy research as the focus, the Laboratory's Technology Transfer Initiatives Program contracted with the Public Opinion Laboratory to conduct a survey designed to promote a better understanding of effective technology transfer. As one of the recognized authorities on scientific surveys, Dr. Jon Miller of the POL worked with Laboratory scientists to understand the objectives of …

The alloys Nb-1Zr and PWC-11 (Nb-1Zr-0.1C) were selected as prime candidate alloys for the SP-100 reactor. Since the mechanical properties of niobium alloys irradiated to end-of-life exposure levels of about 2 x 10SW neutrons/mS (E > 0.1 MeV) at temperatures above 1300 K were not available, an irradiation experiment (B-350) in EBR-II was conducted. Irradiation creep, impact properties, bending fatigue, and tensile properties were investigated; however, only tensile properties will be reported in this paper. The tensile properties were studied since they easily reveal the common irradiation phenomena of hardening and embrittlement. Most attention was directed to testing at the irradiation temperature. Further testing was conducted at lower temperatures in order to scope the behavior of the alloys in cooldown conditions.

By combining picosecond optical experiments and detailed statistical mechanics theory we continue to increase our understanding of the complex interplay of structure and dynamics in important energy transfer situations. A number of different types of problems will be focused on experimentally and theoretically. They are excitation transport among chromophores attached to finite size polymer coils; excitation transport among chromophores in monolayers, bilayers, and finite and infinite stacks of layers; excitation transport in large vesicle systems; and photoinduced electron transfer in glasses and liquids, focusing particularly on the back transfer of the electron from the photogenerated radical anion to the radical cation. 33 refs., 13 figs.

This volume presents the unclassified activities and accomplishments of the Inertial Confinement Fusion and Advanced Laser Development elements of the Laser Program at the Lawrence Livermore National Laboratory for the calendar year 1985. This report has been organized into major sections that correspond to our principal technical activities. Section 1 provides an overview. Section 2 comprises work in target theory, design, and code development. Target development and fabrication and the related topics in materials science are contained in Section 3. Section 4 presents work in experiments and diagnostics and includes developments in data acquisition and management capabilities. In Section 5 laser system (Nova) operation and maintenance are discussed. Activities related to supporting laser and optical technologies are described in Section 6. Basic laser research and development is reported in Section 7. Section 8 contains the results of studies in ICF applications where the work reported deals principally with the production of electric power with ICF. Finally, Section 9 is a comprehensive discussion of work to date on solid state lasers for average power applications. Individual sections, two through nine, have been cataloged separately.

Abstract: This report is the result of an in-depth review of the recent technical literature on expert systems,. The material contained in this report provided a basis for assessing the potential for using expert systems in emergency management operations. In choosing the material for inclusion in this report, special emphasis was placed on those aspects of expert systems which addressed the types of problems encountered in emergency management operations. The report is designed for use as a resource document and as a tutorial on expert systems and emergency management. Each chapter consists of a brief topic essay followed by a set of references which expand on the main themes of the essay.

Abstract: The First Symposium on The Theory and Application of Expert Systems in Emergency Management, held at the Department of Commerce, Washington, D.C. (April 24 and 25, 1985) was funded by the Federal Emergency Management Agency and organized by the National Bureau of Standards' Operations Research Division. The purpose of the symposium was to bring together researchers in expert systems, artificial intelligence, and emergency operations in a forum to review the concepts of expert systems and the problems of emergency management, with the objective of determining how expert systems can be used to augment the experience of local, State and Federal emergency managers faced with the difficult tasks of determining the best response to an emergency situation. Speakers addressed the following areas: The theory and uncertainty aspects of expert systems, artificial intelligence's future role in emergency management, technology for building and using expert systems, emergency management decisions and information needs and uses, applications of expert systems in the management of chemical spills and shipboard and coal mine fires, and the role and use of simulation in emergency management expert systems.

Abstract: This report documents the initial phases of the MIST database, which is a demonstration project jointly supported by the Department of Energy and the National Bureau of Standards. The purpose of the Materials Information for Science and Technology (MIST) is to demonstrate the power and utility of computer access to materials property data. The initial goals include: to exercise the concept of a computer network of materials databases and to build a demonstration of such a system in a way as to be suitable for use as the core of operational systems in the future. Phases I and II are described in detail. In addition, a discussion is given of the expected usage of the databases.

The visual solar oblateness work and the solar seismological work on the internal rotation of the sun are reviewed and their implications concerning the static gravitational multipole moments of the sun are discussed. The results of this work are quite deviant which is indicative of the complexity encountered and of the necessity for continued studies based on a diverse set of observing techniques. The evidence for phase-locked internal gravity modes of the sun is reviewed and the implications for the solar neutrino paradox are discussed. The rather unique possibility for testing the relevance which the phase-locked gravity modes have to this paradox is also noted. The oscillating perturbations in the sun's gravitational field produced by the classified internal gravity modes and the phase-locked modes are inferred from the observed temperature eigenfunctions. Strains of the order of 10/sup -18/ in gravitational radiation detectors based on free masses are inferred for frequencies near 100 ..mu..Hz. The relevance of these findings is discussed in terms of a new technique for use in solar seismological studies and of producing background signals in studies of low-frequency gravitational radiation. 64 refs., 2 figs.

Abstract: OMNITAB 80 is a highly integrated general purpose programming language and statistical software computing system. The system enables the user to use a digital computer to perform statistical and numerical data analysis without having any prior knowledge of computers or programming languages. The system responds to simple instructions to obtain accurate results since reliable, varied and sophisticated algorithms for data analysis and manipulation are referenced. It may be used either interactively or in batch mode. OMNITAB 80 has been installed nationally and internationally. OMNITAB has been completely written to make it as machine independent as possible This document describes Version 6.0. Details are presented so that the user can easily find the specific information needed in any particular instance. Part A is a simple, compact introduction to OMNITAB. Part B describes the general and special features of the OMNITAB system. Part C gives explanations, with short examples, for the use of specific instructions. Part D is a complete alphabetical list of the instructions which are in the system.

The problem of the hollow sphere in a sinusoidal field has been solved in the single shell approximation with the code EDDYNET. Solutions with three different meshes are compared among themselves and with axisymmetric solutions obtained by 2-D codes. Agreement is good for total current and for field at points outside the sphere. Agreement is fair for field at interior points, where the field results from near cancellation of applied and induced fields. Agreement is poor for power dissipation and for the field at points in or near the conducting shell. The limited agreement is to be expected in using a single shell to model a hollow sphere with thickness greater than one skin depth.

This report presents the specifications for a field data acquisition system, using a multi-array borehole resistivity and induced polarization method. (ACR)

The goal of this workshop was to probe in depth a few of the areas of possible physics made possible by the availability of an intermediate energy heavy-ion physics facility. There was a special emphasis on physics that would be possible only with a storage/cooler ring. Topics discussed were nuclei far from stability, quantum electrodynamics, giant resonances and photonuclear reactions, and high energy gamma-ray production. Individual papers in this meeting were abstracted separately.

This report describes the use of an improved mass-consistent model that is intended for diagnosing wind fields in complex terrain. The model was developed by merging an existing mass-consistent model, the NOABL model, with an optimization procedure. The optimization allows objective calculation of important model input parameters that previously had been supplied through guesswork; in this manner, the accuracy of the calculated winds has been greatly increased. The report covers such topics as the software structure of the model, assembling an input file, processing the model's output, and certain cautions about the model's operation. The use of the model is illustrated by a test case.

While fixed-target experiments in storage rings were suggested more than twenty-five years ago, little work has been done and virtually none in this country although interest seems to be growing. We survey the advantages, limitations and possibilities. Luminosities of L approx. = 10/sup 33/cm/sup -2/s/sup -1/ for electrons up to 15 GeV should be achievable now with the PEP storage ring at SLAC with good beam lifetime and emittance for target thicknesses n/sub t/ approx. 10/sup 15//cm/sup 2/. This is thin but ideal for optically pumped, polarized gas targets. Providing longitudinally polarized beams at such targets would provide a unique facility for high luminosity polarized e/sub +-/ + polarized ..gamma.., polarized e/sub +-/ + polarized A and polarized ..gamma.. + polarized A experiments. Other possibilities include the production of both external and internal beams for basic and applied science. Multiple bypass insertions are considered for thicker targets as well as production and storage of exotic, short-lived beams or for production of photon beams with undulators. The related question of multi-turn injection and extraction is also considered in such a context. Several systematic machine physics studies are suggested, e.g., ion-induced, multi-bunch instabilities with e/sub +-/ beams. The SLAC storage ring PEP …

This code estimates concentrations in air and ground deposition rates for Atmospheric Nuclides Emitted from Multiple Operating Sources. ANEMOS is one component of an integrated Computerized Radiological Risk Investigation System (CRRIS) developed for the US Environmental Protection Agency (EPA) for use in performing radiological assessments and in developing radiation standards. The concentrations and deposition rates calculated by ANEMOS are used in subsequent portions of the CRRIS for estimating doses and risks to man. The calculations made in ANEMOS are based on the use of a straight-line Gaussian plume atmospheric dispersion model with both dry and wet deposition parameter options. The code will accommodate a ground-level or elevated point and area source or windblown source. Adjustments may be made during the calculations for surface roughness, building wake effects, terrain height, wind speed at the height of release, the variation in plume rise as a function of downwind distance, and the in-growth and decay of daughter products in the plume as it travels downwind. ANEMOS can also accommodate multiple particle sizes and clearance classes, and it may be used to calculate the dose from a finite plume of gamma-ray-emitting radionuclides passing overhead. The output of this code is presented for 16 sectors …