COBRA-SFS (Spent Fuel Storage) is a general thermal-hydraulic analysis computer code used to predict temperatures and velocities in a wide variety of systems. The code was refined and specialized for spent fuel storage system analyses for the US Department of Energy's Commercial Spent Fuel Management Program. The finite-volume equations governing mass, momentum, and energy conservation are written for an incompressible, single-phase fluid. The flow equations model a wide range of conditions including natural circulation. The energy equations include the effects of solid and fluid conduction, natural convection, and thermal radiation. The COBRA-SFS code is structured to perform both steady-state and transient calculations; however, the transient capability has not yet been validated. This volume contains the input instructions for COBRA-SFS and an auxiliary radiation exchange factor code, RADX-1. It is intended to aid the user in becoming familiar with the capabilities and modeling conventions of the code.

By comparing 3-jet (e/sup +/e/sup -/ ..-->.. q anti q g) and radiative 2-jet (e/sup +/e/sup -/ ..-->.. q anti q ..gamma..) events from electron-positron annihilation, we have studied the local and global effects of the presence of a hard bremsstrahlung gluon in hadronic events. Detector and event selection efficiencies and biases affect these two kinds of events almost equally because they have very similar kinematics and topologies. Accurate comparisons of q anti q g and q anti q ..gamma.. events can therefore be made. Globally, we observe a depletion of hadrons in q anti q g events relative to q anti q ..gamma.. events on the opposite side of the event plane from the gluon, in the angular region between the q and anti q jets. This depletion is shown to be in agreement with the predictions of Quantum Chromodynamics (QCD). The existence of this effect demonstrates that the presence of a gluon significantly alters the color forces and hence the fragmentation process in hadronic events. We also use these q anti q ..gamma.. and q anti q g events to compare low energy (4.5 GeV) gluon and quark jets. Our data indicate that gluon jets have softer x/sub …

The purpose of this study is to provide the DOE information with which it can establish the most efficient program for the long management and disposal, in the Waste Isolation Pilot Plant (WIPP), of remote handled (RH) transuranic (TRU) waste. To fulfill this purpose, a comprehensive review of waste characteristics, existing and projected waste inventories, processing and transportation options, and WIPP requirements was made. Cost differences between waste management alternatives were analyzed and compared to an established baseline. The result of this study is an information package that DOE can use as the basis for policy decisions. As part of this study, a comprehensive list of alternatives for each element of the baseline was developed and reviewed with the sites. The principle conclusions of the study follow. A single processing facility for RH TRU waste is both necessary and sufficient. The RH TRU processing facility should be located at Oak Ridge National Laboratory (ORNL). Shielding of RH TRU to contact handled levels is not an economic alternative in general, but is an acceptable alternative for specific waste streams. Compaction is only cost effective at the ORNL processing facility, with a possible exception at Hanford for small compaction of paint cans …

Several developments affecting the possibility of Higgs detection are discussed. These include the level of certainty about the t quark mass, Monte Carlo programs to generate both signal and background events, and separation and/or enhancement of heavy quark jets from jets due to light quarks or gluons, and the possibility that the neutral Higgs decay into bottom quarks might be the decay mode of choice for detecting the intermediate mass Higgs. Possible means of detection of an intermediate mass Higgs at the SSC, particularly if a prominent decay mode is to bottom quarks, are examined, using the PYTHIA Monte Carlo program to generate both signal and background events. For the signal, events were generated in which Higgs bosons are created in proton-proton collisions, with the Higgs decaying into bottom quarks. The presence of W or Z bosons, created in the same proton-proton collision, is used to enhance the likelihood of Higgs production and to reduce the potentially enormous background. It is found that the Higgs decay to bottom quarks, if important, would be more favorable for detection of the Higgs than decay to top quarks was found to be because of the smaller background. 3 refs., 4 figs. (LEW)

The development of a polarized internal target at an electron store ring is of great interest for studies in nuclear physics. The deuterium nuclei acquire polarization via the hyperfine interaction after electron spin exchange with optically pumped potassium vapor. A high power laser which covers the entire doppler width and hyperfine splitting of the /sup 2/S/sub 1/2/ - /sup 2/P/sub 1/2/ transition in potassium has been developed. Spin relaxation rates for potassium on various wall coatings have been measured. A dri-film surface has been shown to preserve polarization (>100 bounces), be long-lived at elevated temperatures, and to be efficient at preventing deuterium recombination.

A model is presented for the large-scale structure of the universe in which two successive inflationary phases resulted in large small-scale and small large-scale density fluctuations. This bimodal density fluctuation spectrum in an ..cap omega.. = 1 universe dominated by hot dark matter leads to large-scale structure of the galaxy distribution that is consistent with recent observational results. In particular, large, nearly empty voids and significant large-scale peculiar velocity fields are produced over scales of approx.100 Mpc, while the small-scale structure over less than or equal to 10 Mpc resembles that in a low density universe, as observed. Detailed analytical calculations and numerical simulations are given of the spatial and velocity correlations. 38 refs., 6 figs.

The effect of fabrication variables on the irradiation behavior of uranium silicide-aluminum dispersion fuel plates is examined. The presence of minor amounts of metallic uranium-silicon was found to have no detrimental effect, so that extensive annealing to remove this phase appears unnecessary. Uniform fuel dispersant loading, low temperature during plate rolling, and cold-worked metallurgical condition of the fuel plates all result in a higher burnup threshold for breakaway swelling in highly-loaded U/sub 3/Si fueled plates.

A model for the W(001) surface reconstruction phase transition is studied to elucidate the dependence of transition temperature on interaction range and other model parameters. For the parameter set chosen extending the range of the interaction without changing the total reconstruction energy increases the model transition temperature somewhat. This reduces a previously reported discrepancy between the experimental transition temperature and that consistent with the calculated reconstruction energy, but only marginally. 12 refs., 1 fig., 1 tab.

The alloys Nb-1Zr and PWC-11 (Nb-1Zr-0.1C) were selected as prime candidate alloys for the SP-100 reactor. Since the mechanical properties of niobium alloys irradiated to end-of-life exposure levels of about 2 x 10SW neutrons/mS (E > 0.1 MeV) at temperatures above 1300 K were not available, an irradiation experiment (B-350) in EBR-II was conducted. Irradiation creep, impact properties, bending fatigue, and tensile properties were investigated; however, only tensile properties will be reported in this paper. The tensile properties were studied since they easily reveal the common irradiation phenomena of hardening and embrittlement. Most attention was directed to testing at the irradiation temperature. Further testing was conducted at lower temperatures in order to scope the behavior of the alloys in cooldown conditions.

The energy, economic costs and benefits of applying the materials-by-design concept to catalysts were estimated. Catalysts are of particular interest because of the competitive challenge from Japan, West Germany, and France. Initial estimates developed in this study reveal a potential capital cost savings of $31 billion and an operating cost savings of $69 billion for chemical and petroleum refining plants over a 15-year period. The findings of this study substantiate the claim that a major US effort to enhance materials-by-design technology is warranted, at least for catalyst materials. In addition, this technology would ensure pre-eminence by the US industry.

By combining picosecond optical experiments and detailed statistical mechanics theory we continue to increase our understanding of the complex interplay of structure and dynamics in important energy transfer situations. A number of different types of problems will be focused on experimentally and theoretically. They are excitation transport among chromophores attached to finite size polymer coils; excitation transport among chromophores in monolayers, bilayers, and finite and infinite stacks of layers; excitation transport in large vesicle systems; and photoinduced electron transfer in glasses and liquids, focusing particularly on the back transfer of the electron from the photogenerated radical anion to the radical cation. 33 refs., 13 figs.

The growth of epitaxial films of cerium (Ce)/vanadium (V)/on single crystal sapphires (..cap alpha..-Al/sub 2/O/sub 3/) was studied by in-situ reflection high energy electron diffraction and x-ray scattering. For the first time Ce(111) single crystal films was grown on V(110)/Al/sub 2/O/sub 3/(1120) in the Frank-van der Merwe mode. A new epitaxial orientation, different from the well known Nishiyama-Wasserman or Kurdjumov-Sachs orientations is found in the present study. Subsequent V(110) layers grow epitaxially with three equivalent domains.

Since October 1984, the Pacific Northwest Laboratory (PNL) has operated a pilot-scale radioactive liquid-fed ceramic melter (RLFCM) vitrification process in shielded manipulator hot cells. This vitrification facility is being operated for the Department of Energy (DOE) to remotely test vitrification equipment components in a radioactive environment and to develop design and operation data that can be applied to production-scale projects. This paper summarizes equipment and process experience obtained from the operations of equipment systems for waste feeding, waste vitrification, canister filling, canister handling, and vitrification off-gas treatment.

Since its inception in 1975, the Qualification Testing Evaluation (QTE) Program has produced numerous results pertinent to equipment qualification issues. Many have been incorporated into Regulatory Guides, Rules, and industry practices and standards. This report summarizes the numerous reports and findings to date. Thirty separate issues are discussed encompassing three generic areas: accident simulation methods, aging simulation methods, and special topics related to equipment qualification. Each issue-specific section contains (1) a brief description of the issue, (2) a summary of the applicable research effort, and (3) a summary of the findings to date.

The reasons for including variance-covariance information in evaluated nuclear data files are reviewed. Accomplihments and obstacles in meeting these needs are identified. The capability to develop and utilize evaluated cross-section covariance files has been largely demonstrated, but comprehensive files of soundly based covariance data remain to be evaluated and not all types of cross-section data have yet been included. The status of the ENDF-VI covariance formats is discussed. Priorities are suggested for further development. Most effort should be concentrated to fully develop the capability to estimate the nuclear data uncertainties in quantities calculated for a broad energy spectrum. 12 refs.

LEED multiple scattering theory is briefly summarized, and aspects of electron scattering with particular significance to experimental measurements such as electron beam coherence, instrument response and phonon scattering are analyzed. Diffuse LEED experiments are discussed. New techniques that enhance the power of LEED are described, including a real-time video image digitizer applied to LEED intensity measurements, along with computer programs to generate I-V curves. The first electron counting LEED detector using a ''wedge and strip'' position sensitive anode and digital electronics is described. This instrument uses picoampere incident beam currents, and its sensitivity is limited only by statistics and counting times. Structural results on new classes of surface systems are presented. The structure of the c(4 x 2) phase of carbon monoxide adsorbed on Pt(111) has been determined, showing that carbon monoxide molecules adsorb in both top and bridge sites, 1.85 +- 0.10 A and 1.55 +- 0.10 A above the metal surface, respectively. The structure of an incommensurate graphite overlayer on Pt(111) is analyzed. The graphite layer is 3.70 +- 0.05 A above the metal surface, with intercalated carbon atoms located 1.25 +- 0.10 A above hollow sites supporting it. The (2..sqrt..3 x 4)-rectangular phase of benzene and carbon …

Recent theoretical and experimental studies of radiation-induced segregation in alloys under irradiation with focused charged-particle beams have shown that point-defect currents generated by axial and radial displacement-rate gradients can cause significant redistribution of the alloying elements within the irradiated zone. In the case of irradiation of thin films with highly-focused electron beams, two important features have been established experimentally: (1) the diameter of the local region in which the alloy composition and phase are modified is practically equal to the beam diameter, and (2) the time required to produce a given change in the alloy composition in the center of the irradiated zone decreases rapidly with beam diameter. Our theoretical modeling indicates that these features will also be observed in semi-infinite alloys bombarded with focused proton beams. However, in this case, the spatially-nonuniform defect production in both the axial and radial directions renders the compositional redistribution more complex. The present work shows that the ability to locally modify the alloy composition by focused electron or proton beams may offer a new method for producing local regions of controlled composition and microstructure on a submicron scale. The results of our model calculations and experimental studies will be presented to demonstrate the …

The multidisciplinary project was initiated in fiscal year 1986. It comprises two major interrelated parts: (1) Technical Assistance. This part of the project includes: (a) review of the progress of major projects in the DOE Office of Civilian Radioactive Waste Management Program and advise the Engineering and Geotechnology Division on significant technical issues facing each project; (b) analyze geotechnical data, reports, tests, surveys and plans for the different projects; (c) review and comment on major technical reports and other program documents such as site characterization plans and area characterization plans and (d) provide scientific and technical input at technical meetings. (2) Topical Studies. This activity comprises studies on scientific and technical topics, and issues of significance to in-situ testing, test analysis methods, and performance assessment of nuclear waste geologic repositories. The subjects of study were selected based on discussions with DOE staff. For fiscal year 1986, one minor and one major area of investigation were undertaken. The minor topic is a preliminary consideration and planning exercise for post-closure monitoring studies. The major topic, with subtasks involving various geoscience disciplines, is on the mechanical, hydraulic, geophysical and geochemical properties of fractures in geologic rock masses. The present report lists the technical …

This report reviews mineral recovery techniques practiced at active mines throughout Nevada and determines those that may be enhanced by the application of geothermal heat energy from a nearby resource. Of the thirty-two active precious metal mines identified, ten have hot water on or near the property and could potentially benefit. A second purpose was to collect ore samples and geothermal fluids, determine if they are compatible in the hydrometallurgical process, and carry out laboratory tests to determine the effects of heating on recovery rates. In addition, interfering or counterproductive factors were also identified. The laboratory work consisted of measuring the effects of thermally enhancing two hydrometallurgical processes; cyanide heap-leaching of gold and silver ores and bacterial leaching of sulfide rich gold ores. Thermally enhanced cyanide heap-leaching of gold and silver ores produced increases in extraction ranging from 8 to 20% for gold and 17 to 40% for silver. The temperature required for these increases is 35/sup 0/C to 40/sup 0/C, well within the range of available geothermal resources.

Many attempts have been made to combine station surface air temperature data into an average for the Northern Hemisphere. Fewer attempts have been made for the Southern Hemisphere because of the unavailability of data from the Antarctic mainland before the 1950s and the uncertainty of making a hemispheric estimate based solely on land-based analyses for a hemisphere that is 80% ocean. Past estimates have been based largely on data from the World Weather Records (Smithsonian Institution, 1927, 1935, 1947, and U.S. Weather Bureau, 1959-82) and have been made without considerable effort to detect and correct station inhomogeneities. Better estimates for the Southern Hemisphere are now possible because of the availability of 30 years of climatological data from Antarctica. The mean monthly surface air temperature anomalies presented in this package for the than those previously published because of the incorporation of data previously hidden away in archives and the analysis of station homogeneity before estimation.

The hard photon processes ..mu mu gamma.. and hadrons + ..gamma.. in e/sup +/e/sup -/ annihilation at 29 GeV have been studied. The study is based on an integrated luminosity of 226 pb/sup -1/ taken at PEP with the Mark II detector. For the ..mu mu gamma.. process, a small fraction of non-planar events are observed with missing momentum along the beam direction. The resulting missing energy spectrum is consistent with that expected from higher order effects. The observed cross section is consistent with the predicted cross section for this process, sigma/sup exp/sigma/sup th/ = .90 +- .05 +- .06. The observed hard photon energy spectrum and mass distributions are found to be in agreement with O(..cap alpha../sup 3/) QED. The measured charge asymmetry is in good agreement with the predicted value, A/sub exp/A/sub th/ = .83 +- .25 +- .12. The ..mu gamma.. invariant mass distribution is used to place a limit on a possible excited muon coupling G..gamma../M* for excited muon masses in the range 1 < M* < 21 GeV of (G..gamma../M*)/sup 2/ < 10/sup -5/ GeV/sup -2/ at a 95% confidence level. In the hadrons + ..gamma.. process, evidence for final state radiation is found in …

This is the final report on a 4-year research effort funded by DOE. The bulk of the material has been included in numerous publications which are listed in a later section. Most of these have appeared already in archival journals. The most recent work is included in two Ph.D. dissertations. Since most of the material is already documented in detail in the publications mentioned above, we confine the discussion here to highlights of the results.

A range of issues pertaining to heavy flavors at the SSC is examined including heavy flavor production by gluon-gluon fusion and by shower evolution of gluon jets, flavor tagging, reconstruction of Higgs and W bosons, and the study of rare decays and CP violation in the B meson system. A specific detector for doing heavy flavor physics and tuned to this latter study at the SSC, the TASTER, is described. 36 refs., 10 figs.

A brief description of the Heavy-Ion Test Storage Ring (TSR) presently being built at the Max-Planck Institut in Heidelberg is given. It will be able to store ions injected from the tandem postaccelerator combination up to about 30 MeV/nucleon for a charge to mass ratio of 0.5. One of the main purposes of the TSR will be the study of electron cooling. Some atomic physics experiments are discussed using the electron cooling device which provides an electron-ion collision facility with good energy resolution and ion beams of high currents and low emittances. Here the possibilities for measurements of spontaneous and laser-induced radiative recombination and dielectronic recombination in the electron cooling section are discussed.