A straightforward derivation is presented for the covariance matrix of evaluated cross sections based on the covariance matrix of the experimental data and propagation through nuclear model parameters. 10 refs.

A personnel neutron dosimetry system has been developed based on the electrochemical etching of CR-39 plastic at elevated temperatures. The doses obtained using this dosimeter system are more accurate than those obtained using other dosimetry systems, especially when varied neutron spectra are encountered. This Cr-39 dosimetry system does not have the severe energy dependence that exists with albedo neutron dosimeters or the fading and reading problems encountered with NTA film. The dosimetry system employs an electrochemical etch procedure that be used to process large numbers of Cr-39 dosimeters. The etch procedure is suitable for operations where the number of personnel requires that many CR-39 dosimeters be processed. Experience shows that one full-time technician can etch and evaluate 2000 foils per month. The energy response to neutrons is fairly flat from about 80 keV to 3.5 MeV, but drops by about a factor of three in the 13 to 16 MeV range. The sensitivity of the dosimetry system is about 7 tracks/cm/sup 2//mrem, with a background equivalent to about 8 mrem for new CR-39 foils. The limit of sensitivity is approximately 10 mrem. The dosimeter has a significant variation in directional dependence, dropping to about 20% at 90/sup 0/. This dosimeter …

In order to satisfy the need of experimental data for the designing of gas neutralizers we have started a project aimed at measuring all relevant cross sections for the charge exchange of H/sup -/, H/sup 0/ and H/sup +/ projectiles, as well as the cross sections for the production of ions in the target. The expected results of these latter measurements are shown schematically.

An OZI suppressed channel with variable mass, namely the reaction ..pi../sup -/p ..-->.. phi phi n, has been used as a filter which allows resonating gluons or glueballs to pass, while strongly rejecting conventional quark-built hadronic states. The breakdown of the OZI suppression signals a glueball. Glueball mass and particle width estimates are discussed. Reasons why g/sub T/'s have not been seen in other channels, particularly the decay of J/psi, are considered. 34 refs., 9 figs. (LEW)

Detailed spectral and temporal measurements of the output radiation from Xe flashlamps are reported together with their use in predicting the pumping efficiency of Nd-doped laser glass. We have made absolute spectral-intensity measurements for 0.5, 1.5, and 4.2-cm-bore flashlamps for input powers ranging from 5 to 90 kW/cm/sup 2/ and pulselengths of 600 ..mu..s. Under quasi-stationary conditions these flashlamps emit essentially identical spectra when excited at equal input power per unit-area of the bore. This behavior is characteristic of an optically-thick radiator although it is not completely clear why flashlamps should behave this way. A simple model is also described which accounts for the transient response of flashlamps by characterizing the output spectra and radiation efficiencies in terms of the radiant output power rather than the electrical input power. 23 refs., 16 figs.

Disk amplifier design for inertial fusion lasers has evolved with changing fusion-driver requirements from a primary emphasis on gain to a primary emphasis on efficiency. In this paper we compare Shiva and Nova amplifiers to a developmental amplifier (SSA) and show greater than a two-fold improvement in efficiency over past designs under all operating conditions. Experiments to optimize the efficiency of the SSA show that preionization of the flashlamps produces significant benefits and that the packing fraction of lamps is more important than the flashlamp reflector shape. They also show that the optimized flashlamp pulselength and reflector geometry depend on the desired stored energy in the laser medium. We have demonstrated a 7% storage efficiency at a stored fluence per disk of 0.5 J/cm/sup 2/ (stored energy density of 0.06 J/cm/sup 3/) and 4% at 2.0 J/cm/sup 2/ (0.25 J/cm/sup 3/). Comparison of SSA measurements with storage-efficiency calculations show that our flashlamp model accurately predicts the single-pass pumping of disk amplifiers. 24 refs., 22 figs.

A test facility is described which detects small opaque inclusions in large transparent components by using a commercial laser which delivers high energy pulses to the test sample at moderate frequency in a small diameter beam. The sample is automatically scanned such that each point in the volume is irradiated with ten pulses at twice the inclusion damage threshold - an amount sufficient to cause visible damage at inclusion sites. This approach permits detection of opaque inclusions in the parts per trillion and lower concentration range. The specifics of the device design and its performance are discussed in the context of automatic inclusion inspection and mapping in large laser optics.