The objective of the proposed work is to demonstrate the operational and economic feasibility of using high-temperature ceramic filters for particulate control in a variety of coal gasification power generating systems.

The objective of the proposed work is to demonstrate the operational and economic feasibility of using high-temperature ceramic filters for particulate control in a variety of coal gasification power generating systems.

In 1984, the dichromatic train was installed for an initial set of tests. Along with these tests of train performance, measurements of muon rates at various depths in the berm were taken in order to check Monte Carlo predictions. Data were taken at a range of train momentum settings, and from a bare target. The results of those studies are presented here and compared to predictions. In 1985, the quadrupole triplet train was installed for a wide band neutrino run. During this run, 5.5 m of 1.8 m diameter lead was installed at the request of the experimenters to harden the shield. Data obtained during this triplet run under a variety of conditions are also presented, and compared to Monte Carlo predictions. Finally, these results are used to determine how much additional shielding is needed for higher energy operation.

The objective of this proposed work is to demonstrate the operational and economic feasibility of using high-temperature ceramic filters for particulate control in a variety of coal gasification power generating systems.

The objective of the proposed work is to demonstrate the operational and economic feasibility of using high-temperature ceramic filters for particulate control in a variety of coal gasification power generating systems.

The objective of the proposed work is to demonstrate the operational and economic feasibility of using high-temperature ceramic filters for particulate control in a variety of coal gasification power generating systems.

The objective of this proposed work is to demonstrate the operational and economic feasibility of using high-temperature ceramic filters for particulate control in a variety of coal gasification power generating systems.

This handbook demonstrates the application of a tool for measuring and monitoring the impact of a development project in the Department of Quezaltenango, Guatemala. That project itself presently is a demonstration. It explores the technical feasibility and the commercial possibilities of direct geothermal heat applications to the processing of agricultural produce - with the eventual purpose of expanding agricultural exports from Guatemala. The handbook focuses on an early stage of the geothermal initiative and guides preparations for future impact measurement and monitoring of geothermal projects. Primarily, guidance is for projects in agricultural applications of geothermal heat - and basically in Quezaltenango. But the exercise and the handbook are relevant in broad outline to other, industrial applications projects as well which may be based in other departments and have immediate impact across the whole country. This handbook attempts to prepare geothermal energy planners in Guatemala for that juncture when geothermal projects can be managed by objectives. It promotes and facilitates thinking about defining specific objectives for projects that result from the demonstration at Zunil (in Quezaltenango Department); and it prompts preparations for obtaining baseline measurements and for making rational projections on the achievements of future projects.

This report discusses the following topics on the cell lattices parameters optimization at the SSC: Cell lattices; needed aperture; magnet errors; calculated aperture; the trade off curves; cost model; and additional considerations.

The objectives of this project have been: (1) Investigate the possibility of chemical etching of GSGG crystal slabs to obtain increased strength. (2) Design and construct a simplified mold assembly for casting cladding glass to the edges of crystal slabs of different dimensions. (3) Conduct casting experiments to evaluate the redesigned mold assembly and to determine stresses as function of thermal expansion coefficient of cladding glass. (4) Clad larger sizes of GGG slabs as they become available. These tasks have been achieved. Chemical etching of GSGG slabs does not appear possible with any other acid than H/sub 3/PO/sub 4/ at temperatures above 300/sup 0/C. A mold assembly has been constructed which allowed casting cladding glass around the edges of the largest GGG slabs available (10 x 20 x 160 mm) without causing breakage through the annealing step.

This document addresses basic configurational tradeoffs associated with the SP-100 class of nuclear space power systems. In the SP-100 project, the three reference designs, fallback, baseline, and advanced, employ thermoelectric power conversion with different thermoelectric materials. This issue of the document presents results generated for the thermoelectric design as of the end of 1985. Emphasis is placed on showing general trends and the range of possibilities that could result from selection of a particular design. This document, which reflects efforts on 100-kWe reference designs as of the end of 1985, will be extended and updated to reflect progress in the design studies of the follow-on ground engineering phase for which a 300-kWe size has been selected. THere is a considerable flexibility to the SP-100 power system so that it will generally be most advantageous to tailor it to meet user requirements.

This report addresses a comparison of the dynamic and physical apertures of the RHIC90 lattice.

None

Weekly report of the Texas Agricultural Statistics Service on broiler chick numbers in Texas and compared with other states. It includes compiled statistics across six consecutive weeks, from the week ending September 6 to the week ending October 11, during 1985 and 1986 for broiler eggs set, chicks hatched, and chicks placed.

Weekly report of the Texas Crop and Livestock Reporting Service on broiler chick numbers in Texas and compared with other states. It includes compiled statistics across six consecutive weeks, from the week ending December 7 to the week ending January 11, during 1984, 1985, and 1986 for broiler eggs set, chicks hatched, and chicks placed.

This technical memo is a brief owner's manual describing the operation and design of the ziptrack integrator. This electronic circuit is part of a magnetic field mapping devices in use on the Tevatron I at Fermilab. 7 figs., 15 tabs. (DWL)

This report contains summaries of enactments, treaties, and reorganization plans, passed from 1961 through 1985, that have some clearly indicated relationship-- either by specific reference or by virtue of legislative history--to the Federal effort to prevent drug misuse through control of the supply of narcotics and other dangerous drugs.