This report presents the results of a mineral survey of the Starvation Point Wilderness Study Area (AZ-010-005/UT-040-057), Mohave County, Arizona and Washington County, Utah.

From introduction: Simple, precise expressions for lunar diameter, average brightness temperature, flux density, and shape factor are presented. An analysis of the relationship between these parameters and corresponding errors are included. For broadbeam (HPBW>d) antennas, results show that flux density and shape factor can be determined with errors less than 13 percent and 0.4 percent respectively at frequencies below 10 GHz. Extension of the analysis to higher frequencies is indicated.

From introduction: This note describes the design and construction of a coaxial thermal noise standard. The standard is designed to operate at the boiling point of liquid nitrogen with a noise temperature accurate to t 1 K in the frequency range from 1 GHz to 12.4 GHz.

From introduction: The feasibility of using a near-field array for electromagnetic susceptibility testing is studied. The basic objective is to control the element weightings such that a plane wave is generated within the test volume. The basic theory is developed for arbitrary array geometries, and numerical results are obtained for finite planar arrays. A general near-field array synthesis technique is developed, and the technique minimizes the mean square error in the test volume while constraining the array excitations. The constraint prevents large excitations and is useful in minimizing the fields outside the test volume. The basic idea looks promising, but some practical considerations, such as bandwidth and angular scanning limitations, require further theoretical and experimental investigation.

Abstract: This report describes a system based on electromagnetic-acoustic transducers (EMATs) as an approach to automated nondestructive evaluation of thick weldments (>25 mm). Good signal-to-noise ratios, often a problem with EMATs, were possibTe through careful design of the transducers and associated electronic circuits and the use of signal averaging. At 454 kHz, the transducers produce shear-horizontal waves of approximately 7-mm wavelength in steel. The long wavelength permits determination of through-thickness flaw depth from the amplitudes of scattered ultrasonic waves. A minicomputer controlled transducer positioning and acquired the digitized ultrasonic waveforms for synthetic aperture processing. The synthetic aperture technique further improved signal quality and yielded flaw localization through the weld thickness. Measurements on artificial flaws demonstrated a detectability threshold of 0.5 mm (through thickness) and sizing ability up to 2.5 mm, in agreement with theoretical predictions. Details include the design of the transducers and electronics, as well as the mechanical positioner, signal processing algorithms, and complete computer program listing.

Introduction: Small aperture theory is used to investigate the dual TEM cell. Analyzing coupling through an empty versus a loaded aperture leads to a model of dual TEM cell shielding effectiveness measurements. Small obstacle scattering yields results for both the field perturbation and the change in a cell's transmission line characteristics due to the presence of a test object in a TEM cell. In each case, theoretical values are compared to experimental data.