Oxidation of Zircaloy cladding is the primary source of hydrogen generated during a degraded-core accident. In this paper, reported Zircaloy oxidation rates, either measured at 1500 to 1850/sup 0/C or extrapolated from the low-temperature data obtained at <1500/sup 0/C, are critically reviewed with respect to their applicability to a degraded-core accident situation in which the high-temperature fuel cladding is likely to be exposed to and oxidized in mixtures of hydrogen and depleted steam, rather than in an unlimited flux of pure steam. New results of Zircaloy oxidation measurements in various mixtures of hydrogen and steam are reported for >1500/sup 0/C. The results show significantly smaller oxidation and, hence, hydrogen-generation rates in the mixture, compared with those obtained in pure steam. It is also shown that a significant fraction of hydrogen, generated as a result of Zircaloy oxidation, is dissolved in the cladding material itself, which prevents that portion of hydrogen from reaching the containment building space. Implications of these findings are discussed in relation to a more realistic method of quantifying the hydrogen source term for a degraded-core accident analysis.

A single pass, tapered electron wiggler and associated beam transport has been constructed at the Experimental Test Accelerator (ETA) at Lawrence Livermore National Laboratory (LLNL). The system is designed to transport 1 kA of 4.5 MeV electrons with an emittance of 30 millirad-cm. The planar wiggler is provided by a pulsed electromagnet. The interaction region is an oversized rectangular waveguide. Quadrupole fields stabilize the beam in the plane parallel to the wiggler field. The 3 meter long wiggler has a 9.8 cm period. The Free Electron Laser (FEL) will serve as an amplifier for input frequencies of 35 GHz and 140 GHz. The facility is designed to produce better than 500 Megawatts peak power.

Due to its combination of transparency and low thermal conductivity, aerogel holds considerable promise for use as insulating window materials for residential and commercial applications. This paper reports on the preliminary investigation of the optical and scattering properties of silica aerogels. It briefly describes the properties of aerogels important for window glazing applications. The optical properties are then described, followed by a discussion of the scattering measurements and their interpretation.

In this article, we discuss some of the numerical techniques developed by Jim Wilson and co-workers for the calculation of time-dependent radiation flow. Difference equations for multifrequency transport are given for both a discrete-angle representation of radiation transport and a Fick's law-like representation. These methods have the important property that they correctly describe both the streaming and diffusion limits of transport theory in problems where the mean free path divided by characteristic distances varies from much less than one to much greater than one. They are also stable for timesteps comparable to the changes in physical variables, rather than being limited by stability requirements.

This paper presents recent experimental data for the quench-heat-transfer characteristics of superheated packed beds of spheres which were cooled, in separate experiments, by top- and bottom-flooding modes. Experiments were carried out with beds of 3-mm steel spheres of 330-mm height. The initial bed temperature was 810 K. The observed heat-transfer rates are strongly dependent on the mode of water injection. The results suggest that top-flood bed quench heat transfer is limited by the rate at which water can penetrate the bed under two-phase countercurrent-flow conditions. With bottom-reflood the heat-transfer rate is an order-of-magnitude greater than under top-flood conditions and appears to be limited by particle-to-fluid film boiling heat transfer.

I present a Lagrangian which describes the spontaneous breaking of chiral symmetries in strongly interacting supersymmetric Yang-Mills theory with matter fields. This Lagrangian predicts that supersymmetry is spontaneously broken if the matter fields have precisely zero mass.

When a monochromatic electromagnetic wave propagates through a nonuniform plasma (of n dimensions), its refraction may be studied in terms of its family of rays in 2n-dimensional phase space (k,x). These rays generate and n-dimensional surface. Imbedded in the phase space. The wave amplitude and phase are defined on this surface. As the rays twist and separate (from the dynamics of the ray Hamiltonian), the surface develops pleats and becomes convoluted. Projection of the surface onto x-space then yields a multivalued k(x). The local spectral density, as a function of k for given x, exhibits sharp spikes at these k(x), in the ray-optics limit. The next correction yields a finite width to these spikes. As the surface becomes more and more pppleated, these spectral peaks overlap; the spectrum changes qualitatively from a line spectrum to a continuous spectrum. Correspondingly, the two-point spatial correlation function loses its long-range order, as the correlation volume contracts. This phenomenon is what we call the transition to incoherence.

As a particle bunch in a storage ring passes through a region with a transverse impedance, it generates a transverse wake electromagnetic field that is proportional to the transverse displacement of the bunch in the region. The field acts back on the bunch, causing various effects (such as instabilities) in the motion of the bunch. We study one such effect in which a transverse impedance causes the beam to be distorted in its shape. Observed at a fixed location in the storage ring, this distortion does not change from turn to turn; rather, the distortion is static in time. To describe the distortion, the bunch is considered to be divided longitudinally into many slices and the centers of change of the slices are connected into a curve. In the absence of transverse impedance, this curve is a straight line parallel to the direction of motion of the bunch. Perturbed by the transverse wake field, the curve becomes distorted. What we find in this paper is the shape of such a curve. The results obtained are applied to the PEP storage ring. The impedance is assumed to come solely from the rf cavities. We find that the beam shape is sufficiently …

Volume 2 contains papers presented at the following sessions: adsorption; noble gas treatment; personnel education and training; filtration and filter testing; measurement and instrumentation; air cleaning equipment response to accident related stress; containment venting air cleaning; and an open end session. Twenty-eight papers were indexed separately for inclusion in the Energy Data Base. Ten papers had been entered earlier.

The Seismic Safety Margins Research Program (SSMRP) is developing a complete fully coupled analysis procedure (including methods and computer codes) for estimating the risk of an earthquake-induced radioactive release from a commercial nuclear power plant. The analysis procedure is based upon a state-of-the-art evaluation of the current seismic analysis and design process and explicitly accounts for uncertainties inherent in such a process. In Phase I, the seismic input, the soil-structure interaction, dynamic response of structures and subsystems, and fragility were developed and combined using a probabilistic computational procedure. Demonstration calculations were completed for the Zion nuclear power plant. In Phase II, presently ongoing, additional models, improvements to existing models, and improvements to the probabilistic computational assessment of Zion have been developed. Local site amplification has significant effect on structural response and is a major source of uncertainty. As part of the final Zion analysis in Phase II, an assessment of the local site effect at the Zion site was made using new time histories modified for the Zion soil conditions. In this paper, we briefly describe the approach used to correct the seismic hazard curve and time histories developed in Phase I for local site effects and discuss in some …

The successful operation of the impurity-control system of the FED/INTOR will depend to a large extent on the ability of its various components to withstand the imposed thermal and mechanical loads. The present paper explores the thermal and stress analyses aspects of the limiter and divertor operation of the FED/INTOR in its reference configuration. Three basic limitations governing the design of the limiter and the divertor are the maximum allowable metal temperature, the maximum allowable stress intensity and the allowable fatigue life of the structural material. Other important design limitations stemming from sputtering, evaporation, melting during disruptions, etc. are not considered in the present paper. The materials considered in the present analysis are a copper and a vanadium alloy for the structural material and graphite, beryllium, beryllium oxide, tungsten and silicon carbide for the coating or tile material.

The STARFIRE/DEMO Project has performed a conceptual design study of the demonstration fusion power reactor to follow the FED/INTOR class of experimental tokamaks. This paper discusses thermo-structural and thermal-hydraulic aspects of two fundamentally different first wall and tritium breeding blanket concepts for STARFIRE/DEMO. The first concept uses solid lithium oxide (Li/sub 2/O) as the tritium breeder in a modular blanket. The first wall is a flat corrugated panel. Both first wall and blanket are constructed of titanium-modified austenitic stainless steel and are cooled with pressurized high-temperature water. The second concept features a liquid metal, 17Li-83Pb, as tritium breeder and coolant. The blanket module's two semi-cylindrical front walls form the first wall, the back faces of which are cooled by flowing liquid metal. Ferritic steel and vanadium alloy are the candidate structural materials.

Six slices of ultra-pure germanium were irradiated with thermal neutron fluences between 7.5 x 10/sup 16/ and 1.88 x 10/sup 18/ cm/sup -2/. After thermal annealing the resistivity was measured down to low temperatures (< 4.2 K) and found to follow the relationship rho - rho/sub 0/exp(..delta../T) in the hopping conduction regime. Also, several junction FETs were tested for noise performance at room temperature and in an insulating housing in a 4.2K cryostat. These FETs will be used as first stage amplifiers for neutron-transmutation-doped germanium bolometers.

Spontaneously broken supergravity might help us to understand the puzzle of the mass scales in grand unified models. We describe the general mechanism and point out the remaining problems. Some new results on local supercolor are presented.

The state of hadron spectroscopy in general and of heavy quark-antiquark bound states in particular is briefly reviewed. The first lecture is devoted to a summary of elementary techniques of quarkonium quantum mechanics. The second is concerned with inverse-scattering techniques. Throughout, the implications of recent data are assessed.

This talk gives a general but highly subjective overview of the expectation for accelerators and colliders for high energy physics, but not extended developments of accelerators and storage rings for application to nuclear structure physics, synchrotron radiation, medical applications or industrial use.

A model for calculation of the aerosol generation rate resulting from surface bubble rupture during molten core-concrete interactions is discussed. One aspect of the model, based upon previous work in the literature, considers that film rupture occurs due to growth of film oscillation disturbances in the surface liquid film. Calculations are presented for molten pools with liquid properties in the range of prototypic interest.

A review is made of possible astronomical neutrino sources detectable with underground facilities. Comments are made about solar neutrinos and gravitational-collapse neutrinos, and particular emphasis is placed on ultra-high-energy astronomical neutrino sources. An appendix mentions the exotic possibility of monopolonium.

As part of the Research and Development phase of the Uranium Mill Tailings Remedial Action (UMTRA) program, the Lawrence Berkeley Laboratory (LBL) has set itself the goal of explaining the physico-chemical evolution of the Riverton site on the basis of the already collected field data at the site (Tokunaga and Narasimhan, 1982, Smith and Moed, 1982; White et al., 1984). The predictive aspects as well as addressing the question of critical quantity of field data have to be considered during the design phase of the project as a joint effort between the LBL team and the construction engineers. At the present time, LBL is in the process of completing the Research and Development phase of the work. As of this writing, the development of an appropriate set of mathematical models has been completed. The computations of the soil-water regime at the upper tailings surface, involving climatological factors is nearing completion. Computations of chemical transport are still in progress. This paper is devoted to a description of the key mathematical issues, the mathematical models that are needed to address these issues and a discussion of the model results pertaining to the soil water regime at the tailings-atmosphere interface. 11 references, 3 …

Novette has been designed to deliver 18.0 kJ in 1 nsec and 28 kJ in 3 nsec as maximum damage limited drive to the frequency conversion arrays. We expect maximum frequency doubled on-target energies of 13 kJ in 1 nsec and 20 kJ in 3 nsec. Propagation studies performed as Novette has been activated will be reviewed and their bearing on the Nova laser design discussed. The characteristics of the incident laser radiation in the target chamber center will be described.

A drift collection calorimeter having a combined radiator and field-shaping structure made of lead-glass tubing is described. A high-resistance metallic layer is formed by reduction of the lead oxide at the surface of the glass and forms a continuous voltage divider for drift-field shaping. The energy resolution of such a calorimeter is modeled, for several configurations, by the Monte Carlo technique.

On March 28, 1979, an accident occurred at the Three Mile Island nuclear power plant Unit No. 2 near Middletown, PA. A Presidential Commission was established to investigate the incident and was given the responsibility to evaluate the actual and potential impact of the events on the health and safety of the workers and the public. A main conclusion of the investigation was that the most serious health effect was severe, short-lived mental stress. This paper describes the study and the findings for four different study groups: (1) the general population of heads of households located within 20 miles of the plant; (2) mothers of preschool children from the same area; (3) teenagers in the 7th, 9th, and 11th grades from the area; and (4) nuclear workers employed at the Three Mile Island nuclear power plant. (ACR)

An ion-cyclotron range of frequencies (ICRF) heating system has been installed in the Tandem Mirror Experiment-Upgrade (TMX-U) central cell. Our initial objective is to heat low density ions in the near field of the antenna. This heating reduces the collisionality of central cell ions, which decreases the filling rate of the thermal barrier by passing ions from the central cell. From power- and particle-balance calculations, we determined that 60 kW of absorbed power is sufficient to heat plasma densities of up to 2 x 10/sup 12/ cm/sup -3/. These power requirements are consistent with ion heating results from the Phaedrus tandem mirror. Based on this, we have installed a 200-kW oscillator/power amplifier, tunable to as low as 1.5 MHz. It drives a 110/sup 0/, 9 1/2-turn loop antenna that has a commercially built Faraday shield and matching network. The system has been tuned with plasma and is being used for the initial heating studies at the ion-cyclotron frequency ..omega../sub ci/.

These studies indicate that ICRF transition pumping is feasible in the TMX-U experiment using moderate frequencies and power levels. Some degree of latitude must be included in the final design to compensate the rough calculations. The possibility of coupling near 2 ..omega../sub ci/ is attractive but awaits a clearer exposition of the theory and an adequate computer code.