Efforts were concentrated on the development of H/sup -//D/sup -/ sources capable of delivering about 1A of beam current, operating steady state at an energy of several tens of keV and having properties that would allow a scaling up to 10A and their use in a high energy neutral beam line. In the seventies we have developed negative ion sources of the plasms surface type with extracted current densities of several hundred mA/cm/sup 2/. Particularly successful was the development of the magnetron source, from which pulsed beam currents in excess of one ampere have been obtained and accelerated up to 120 kV. These magnetrons have become standard sources in high energy accelerator laboratories around the world and they are candidates for application in polarized H/sup -/ ion sources as well. Work on hollow cathode deuterium sources and neutraizers is reported.

One of the effects of ions in the SLC arcs was considered by A.W. Chao in CN-121. He estimated that the extra betatron phase shift of particles in the tail of a bunch caused by ions produced by the head was probably tolerable, provided the vacuum was 10/sup -4/ torr or better. This note suggests that a more thorough study of ion effects in the arcs is warranted.

The emission of positrons from supernova ejecta is dicussed in terms of the galactic-center annihilation radiation. The positrons from the radioactive sequences /sup 56/Ni..-->../sup 56/Co..-->../sup 56/Fe are the most numerous source from supernova. Only type I supernova will allow a significant fraction to escape the expanding ejecta. For a neutron star model of a type I SN a fraction 4 x 10/sup -3/ of the escaped positron is enough to create the observed several year fluctuation of the annihilation radiation. The likelihood of this model is discussed in terms of other astrophysical evidence as well as the type I SN light curve.

There are two significantly different mechanisms proposed for the origin of the optogalvanic effect in a hollow-cathode discharge: (1) laser excitation of atoms to higher electronic states leads to an increased cross section for electron impact ionization, with the result that the excited atom becomes ionized and the conductivity of the discharge increases; and (2) laser excitation of atoms to higher electronic states perturbs the equilibrium established between the electron temperature and the atomic excitation temperature. Superelastic collisions between the electrons and the laser-excited atoms restore the equilibrium, with the excess energy ending up in an increased electron temperature and therefore an increased conductivity of the discharge. Both mechanisms undoubtedly proceed simultaneously and what needs to be determined is their relative importance at different discharge conditions and different excitation conditions. This is important because laser isotope enrichment schemes have been proposed using selective excitation in a hollow-cathode discharge. In order for these schemes to work, (1) must be the predominant mechanism. We have measured the optogalvanic signal, concentration of uranium atoms, impedance of the discharge, and electron temperature as a function of the discharge current in a neon-filled uranium hollow-cathode discharge. The hollow cathode operating characteristics are used as input …

An evaluation was made of the design and hydromechanical performance characteristics for three basic turbine types: axial flow (Jonval), inward radial flow (Francis) and crossflow (Banki). A single commercially available turbine representative of each type and within the appropriate power range (<5hp) was obtained for evaluation. Specific turbine selections were based on price, availability and suitability for operation at heads of 50 feet or less and flows under 2 cubic feet per second. In general, the peak operating efficiencies of each unit tended to be lower than anticipated, falling in the range of 40 to 50%. With sufficient flow, however, significant useful power outputs up to 3 hp were obtained. While the radial flow turbine (a centrifugal pump operated as a turbine) had the lowest initial unit cost, the axial and cross flow designs exhibited more stable operation, particularly under transient loadings. The crossflow turbine had the added advantage that it was essentially self-cleaning. With further developmental effort and appropriate design modifications it should be possible to bring each of these microhydro designs to their full performance potential.

Design considerations and experimental results are presented of a compressed magnetic field pulsed energy source. A 100-mm-diameter, gun-fired projectile of approx. 2MJ kinetic energy was the input energy source. An initial magnetic field was trapped and compressed by the projectile. With a shorted load, a magajoule in a nanohenry was the design goal, i.e., 50 percent energy transformation from kinetic to magnetic. Five percent conversion was the highest recorded before gauge failure.

A new Pool-Bed model of the CONACS (Containment Analysis Code System) code represents a major advance over the pool models of other containment analysis code (NABE code of France, CEDAN code of Japan and CACECO and CONTAIN codes of the United States). This new model advances pool-bed modeling because of the number of significant materials and processes which are included with appropriate rigor. This CONACS pool-bed model maintains material balances for eight chemical species (C, H/sub 2/O, Na, NaH, Na/sub 2/O, Na/sub 2/O/sub 2/, Na/sub 2/CO/sub 3/ and NaOH) that collect in the stationary liquid pool on the floor and in the desposit bed on the elevated shelf of the standard CONACS analysis cell.

The leak testing, reporting and vacuum leak repair techniques of the MFTF yin-yang number one magnet system, the world's largest superconducting magnet system, are discussed. Based on this experience, techniques will be developed for testing and repairing leaks on the 42 MFTF-B magnets. The leak-hunting techniques for the yin-yang magnet systems were applied to two helium circuits (the coil bundle and guard vacuum; both require helium flow for magnet cooldown), their associated piping, liquid nitrogen radiation shields, and piping. Additionally, during MFTF-B operation there will be warm water plasma shields and piping that require leak checking.

The breeder reactor industry throughout the world has grown impressively over the last two decades. Despite the uncertainties in some national programs, breeder reactor technology is well established on a global scale. Given the magnitude of this technological undertaking, there has been surprisingly little emphasis on general breeder reactor education - either at the university or laboratory level. Many universities assume the topic too specialized for including appropriate courses in their curriculum - thus leaving students entering the breeder reactor industry to learn almost exclusively from on-the-job experience. The evaluation of four course presentations utilizing visual aids is presented.

We will discuss a set of experiments which are designed to study approaches to and search for the existence of amplified spontaneous emission at photon energies of 42.3, 53.6, 119.0, and 153.0 eV. The schemes utilize pumping from the Novette laser operated with cylindrical optics at 5 TW/beam and 100 psec.

Code PSOLV solves for potential and densities at the cardinal points of MFTF-B. The code is equipped to handle both the throttle-coil and the axicell geometries. For the throttle-coil case, the potential at point MXO is input, while the potentials and densities at points MAI, b, and A are calculated. For the axicell case, the code must additionally solve for the potentials and densities at points X and MXO. PSOLV is intended primarily for use as a subroutine in TREQ, a code being developed by Rensink that calculates the densities and potentials at the cardinal points of MFTF-B as a function of time. TREQ is to be used for modeling start-up behavior.

A high-gain FEL experiment using the 10 kA, 4.5 MeV Experimental Test Accelerator (ETA) is described.

The field-ionization mass spectral hydrocarbon data from F-45 (Wyodak coal-derived SRC) and F-51 (Kentucky 9/14 coal-derived SRC) were recalculated so the various hydrocarbon fractions could be compared directly on a weight percent basis. A computer program was developed which allows the field-ionization mass spectral hydrocarbon data to be compared in a three dimensional fashion. This approach provides for a rapid general comparson of all the field-ionization hydrocarbon data. The solubility of preasphaltenes was tested in several solvents. The preasphaltenes-2 were found to be largely soluble in pyridine:chloroform 9:1(v/v) or 7:3(v/v) and pyridine:chloroform:tetrahydrofuran 7:1:2(v/v/v). Experiments were carried out in which Chromasorb T was tested as a replacement for Fluoropak in the Fluoropak-basic alumina procedure. The results indicated Chromasorb T would be an adequate substitute for Fluoropak, but additional experiments will be run to confirm this. The chromatographic characteristics of numerous hydroxyl aromatics, nitrogen heterocycles, and aromatic amines were obtained on several normal-phase and reversed-phase high-performance liquid chromatographic systems. 30 references, 30 figures, 10 tables.

The overall objective of the Westinghouse coal gasification program is to demonstrate the viability of the Westinghouse pressurized, fluidized bed, gasification system for the production of medium-Btu fuel gas for syngas, electrical power generation, chemical feedstocks, or industrial fuels and to obtain performance and scaleup data for the process and hardware. Technical progress summaries and reports are presented for the following tasks: (1) process development unit (PDU) test operations and results (gasifier test TP-033-1 and maintenance and modifications); (2) process analysis (environmental characterization results, coal gas combustion results, and fines elutriation and consumption results); (3) cold flow scaleup (modifications and maintenance, operations, and data analysis); (4) process and component engineering and design (hot fines recycle modifications, and hot recycled fines); (5) laboratory support studies (gas-solids flow modeling and coal/ash behavior). 23 figures, 23 tables.

A major challenge for laser fusion is the study of the symmetry and hydrodynamic stability of imploding fuel capsules. Framed x-radiographs of 10-100 ps duration, excellent image quality, minimum geometrical distortion (< 1%), dynamic range greater than 1000, and more than 200 x 200 pixels are required for this application. Recent progress on a gated proximity focused intensifier which meets these requirements is presented.

None

None

None