In this paper, the whole-core reactivity consequences of internal fuel motion in three annular fuel designs during a hypothetical 3 dollars/s transient overpower (TOP) accident are compared to determine the effect of geometric design variations. The PINEX-2 and PINEX-3 experiments were performed in the TREAT reactor using annular fuel pins irradiated in GETR. This paper investigates three combinations of solid and annular axial blankets and fission gas plena: top annular blanket and plenum, bottom annular blanket and plenum, and both top and bottom (dual) annular blankets and plena. The dual plena design case showed a significant decrease in internal fuel motion over the single plenum design cases.

A test program to determine the effectiveness of various magnetic shielding designs for MFTF-B beamlines was established at Lawrence Livermore National Laboratory (LLNL). The proposed one-tenth-scale shielding-design models were tested in a uniform field produced by a Helmholtz coil pair. A similar technique was used for the MFTF source-injector assemblies, and the model test results were confirmed during the Technology Demonstration in 1982. The results of these tests on shielding designs for MFTF-B had an impact on the beamline design for MFTF-B. The iron-core magnet and finger assembly originally proposed were replaced by a simple, air-core, race-track-coil, bending magnet. Only the source injector needs to be magnetically shielded from the fields of approximately 400 gauss.

We present an analytic theory of Richtmyer-Meshkov instabilities in an arbitrary number N of stratified fluids subjected to a shock. Following our earlier work on Rayleigh-Taylor instabilities, the theory assumes incompressible flow in which a shock is treated an impulsive acceleration, g = ..delta.. v delta(tau/sub s), ..delta..v being the jump velocity induced in the system by a shock at time tau/sub s/. We discuss the special cases N = 2 and N = 3, and illustrate both Rayleigh-Taylor and Richtmyer-Meshkov instabilities by examples patterned after inertial confinement fusion implosions.

The Nova laser, presently under construction at Lawrence Livermore National Laboratory, will be capable of delivering more than 100 kJ of focused energy to an Inertial Confinement Fusion (ICF) target. Operation at the fundamental wavelength of the laser (1.05 ..mu..m) and at the second and third harmonic will be possible. This paper will discuss the optical alignment systems and techniques being implemented to align the laser output to the target at these wavelengths prior to each target irradiation. When experiments require conversion of the laser light to wavelengths of 0.53 ..mu..m and 0.35 ..mu..m prior to target irradiation, this will be accomplished in harmonic conversion crystals located at the beam entrances to the target chamber. The harmonic alignment system will be capable of introducing colinear alignment beams of all three wavelengths into the laser chains at the final spatial filter. The alignment beam at 1.05 ..mu..m will be about three cm in diameter and intense enough to align the conversion crystals. Beams at 0.53 ..mu..m and 0.35 ..mu..m will be expanded by the spatial filter to full aperture (74 cm) and used to illuminate the target and other alignment aids at the target chamber focus. This harmonic illumination system will …

It has been decided, at least tentatively, to mount the arc magnets on pedestals, the motivation being to provide the most rigid support possible. In the same spirit the pedestals should be as short as possible. It has been proposed to shorten the pedestals by about 10 inches by either raising the floor of the tunnels or lowering the beams. A relatively simple means for lowering the beams is considered here.

At Lawrence Livermore National Laboratory, there are experimental applications requiring digital signal acquisition as well as data reduction and analysis. A prototype Signal Acquisition/Processing Station (SAPS) has been constructed and is currently undergoing tests. The system employs an LSI-11/23 computer with Data Translation analog-to-digital hardware. SAPS is housed in a roll-around cart which has been designed to withstand most subtle EMI/RFI environments. A user-friendly menu allows a user to access powerful data acquisition packages with a minimum of training. The software architecture of SAPS involves two operating systems, each being transparent to the user. Since this is a general purpose workstation with several units being utilized, an emphasis on low cost, reliability, and maintenance was stressed during conception and design. The system is targeted for mid-range frequency data acquisition; between a data logger and a transient digitizer.

The Mirror Advanced Reactor Study (MARS) is a conceptual design study for a commercial fusion power reactor. One of the major goals of MARS is to develop design guidance so that fusion reactors can meet reasonable expectations for environmental health and safety. One of the first steps in the assessment of health and safety requirements was to examine what the guidelines might be for health and safety in disposal of radioactive wastes from fusion reactors. Then, using these quidelines as criteria, the impact of materials selection upon generation of radioactive wastes through neutron activation of structural materials was investigated. A conclusion of this work is that fusion power systems may need substantial engineering effort in new materials development and selection to meet the probable publicly acceptable levels of radioactivity for waste disposal in the future.

Cobalt activation calculations will be reviewed, and similar comparisons of sulfur activation interior to electrical insulators on power transmission lines will be discussed. The relationship between neutron tissue kermas one to two kilometers from hypocenter and the particular activations of cobalt and sulfur are reviewed. At present, measured and calculated quantities agree within associated uncertainties, which are substantial. Additional work to shrink these uncertainties will be discussed. Particular cobalt activation topics will include: the sensitivity to thermal neutrons outside the pillar; calculated values using actual Nagasaki concrete composition; and calculational advances to improve modelling of the actual configuration. Particular sulfur activation topics will include: absolute comparisons of measured and calculated ratios of dpm/gm of /sup 32/P at all measured ranges, based on approximate experimental values for insulator attentuation and source radiations; the relationship between sulfur activation within a kilometer of hypocenter and kermas at two kilometers; and calculational advances to improve modelling of the actual configuration.

We report laser experiments on a 248 nm KrF laser with a 30x40x120 cm gain volume and an injection locked unstable resonator cavity. The volume is pumped by six 450 kV, 90 kA electron beam generators using water pulse forming lines.

Unless certain common sense precautions are observed, the luminosity of the Collider may be adversely affected by otherwise preventable ground vibrations. Previous work indicates that ground vibrations can be thought of as being caused by the sum of (a) natural and (b) cultural (i.e., man-made) effects, of which the latter can be further divided into uncontrollable and controllable. Examples of category (b) include: traffic, both on site and off site; construction activity on site and off site; assembly of equipment in nearby I.R. Halls, even footsteps in the tunnel; or continuously operating machinery. This note addresses question with respect to category (b) iv., only. As a guide, the order of magnitude of amplitudes and frequencies of presently, (on site) known noise polluters is described in relation to naturally occurring disturbances and to the tolerances required for successful Collider operation. Some methods of mitigating the effects of on site machinery are suggested. Finally, a vibration tolerance level specification is recommended as well as a mechanism to police adherence to such standards. 6 figures.

None