Representatives of the Laboratories of the International Collaboration on Advanced Neutron Sources gathered between 28 June and 2 July, 1982 at Argonne National Laboratory for their sixth meeting, ICANS-VI. The meeting was the first opportunity for participants to see Argonne's Intense Pulsed Neutron Source, which went into full operation in August, 1981, and in an important sense celebrated the coming-on-line of this most recent entry into the world's complement of the new generation of neutron sources. The main topics of the meeting were "Targets and Moderators" and "Neutron Scattering Instrumentation", following what has become the customary rotation of subjects. An additional topic, "Nuclear Data and Codes" emerged this time as a separate entity, closely related to the Targets and Moderators subjects. These Proceedings are organized roughly in the order and organization of presentations. In addition, a record of some of the discussions is included following each Status Report, and separate summaries of discussions on various subjects of the topical sessions. The manuscripts have been reproduced essentially as received.

Three liquid-based solar heating systems employing different types of solar collectors were tested side by side near Chicago, Illinois for one year. The three different types of collectors were: (1) a flat plate collector with a black-chrome coated absorber plate and one low-iron glass cover; (2) an evacuated-tube compound parabolic concentrator (CPC) with a concentration ratio of 1.1, oriented with tubes and troughs along a north-south axis; and (3) an evacuated-tube CPC collector with a concentration ratio of 1.3 and one low-iron glass cover, with tubes and troughs oriented along an east-west axis. Results indicate that the flat plate collector system was the most efficient during warm weather, but the CPC systems were more efficient during cold weather, but the CPC systems were more efficient during cold weather, and the CPC systems operated under conditions too adverse for the flat plate collector. The computer simulation model ANSIM was validated by means of the side-by-side tests. The model uses analytical solutions to the storage energy balance. ANSIM is compared with the general simulation TRNSYS.

Annual report of the Argonne National Laboratory Radiological and Environmental Research Division regarding activities related to molecular physics and chemistry.

Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes efforts directed toward (1) improving understanding of component behavior in molten carbonate fuel cells and (2) developing alternative materials and concepts for components. The principal focus was changed during this period from the development of cathodes fabricated from NiO and electrolyte supports of sintered y-LiA102 to an investigation of NiO cathode dissolution and deposition and a search for alternative cathode materials.

Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes efforts directed toward (1) evaluating the dissolution of NiO cathodes in molten carbonate fuel cells and (2) seeking alternative cathode materials. Solubility data were taken for NiO in a cathode environment, and previously operated cells were examined for nickel transfer. A literature search was made for prospective alternative cathode materials, and synthesis of new materials was begun. Apparatus was assembled for conductivity measurements on cathode materials.

Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes efforts directed toward seeking alternative cathode materials to NiO for molten carbonate fuel cells.

Intergranular stress-corrosion crack (IGSCC) propagation rates were measured in three heats of sensitized Type 304 stainless steel (SS) as a function of sensitization in an environment of high-purity water with 8 ppm oxygen, using a fracture mechanics approach. Specimens were sensitized using controlled furnace heat treatments and the degree of sensitization was measured by the electrochemical potentiokinetic reactivation (EPR) method. Active loading tests were performed on standard specimens over a range of intensities. Crack lengths were determined by compilance measurements using in-situ high-temperature clip gage or LVDT methods, optical metallography on the side faces of the specimen, and fractography of the cracked surface after completion of the tests. The optical metallography measurements did not provide useful estimates of crack lengths, because large variations in IGSCC propagation across the thickness of the specimens occurred. The effects of the degree of sensitization on the IGSCC propagation rate are obscured by the data scatter. However, it seems clear that these variables do not lead to order-of-magnitude changes in the crack propagation rate.

The research program in nuclear physics in the Physics Division spans a broad range of activities and contributes to many of the major questions in the discipline. Activities may be roughly divided into three broad categories. Research with the tandem-linac in heavy-ion physics is doing well, though laboring under severe budgetary constraints, and outside use of the facility has increased substantially. Progress on the construction of the full ATLAS facility is coming along expeditiously and it is expected to be completed on schedule in 1985. In medium-energy physics, activities are continuing at LAMPF, as well as other accelerators, though considerable effort was devoted this year to the preparation of a proposal for a national electron accelerator facility.

This is the second report describing an ongoing environmental surveillance program conducted at the Palos Park Forest Preserve near Chicago, Illinois. The Preserve was a site of a nuclear research laboratory (Site A) from 1943 to 1956 and a radioactive waste burial site (Plot M) from 1944 to 1949. An extensive radiological characterization of the site was conducted from February 1976 to August 1977, and tritium in the form of water was found to be the only radionuclide that migrated from the nuclear facilities. The results were published in US Department of Energy Report DOE/EV-0005/7. The present report summarizes the earlier findings and gives the detailed results of the work from August 1977 through December 1981. The vertical and horizontal distribution of tritium within the glacial till was determined from measurements of tritium in soil moisture. Chemical and radiochemical analyses were performed on a number of wells in the area. Tritiated water continued to be the only species that was observed to have migrated from the Plot M area. Migration from the Site A area was not observed. The concentration of tritium at the Red Gate Woods well, 1200 ft down-gradient from Plot M, continued to show the seasonal fluctuations …

The shellside pressure drop between the inlet and outlet nozzles as well as the pressure drops through individual sections of different shell-and-tube test-exchanger configurations are measured under water flow. The segmentally baffled test exchanger is nominally 0.6 m (2 ft) in diameter, 3.7 m (12 ft) long and contains a tube bundle of 19 mm (0.75 in.) outside-diameter tubes. Results are reported of 24 test cases obtained from various combinations of parameters: 30 degrees triangular or 90 degrees square tube layout patterns (all on a 1.25 pitch-to-diameter ratio), numbers of cross-passes, sizes of nozzles, plain or finned tubes, and full or special fix tube bundles. The exponential change of pressure drop as a function of flow-rate is also investigated and an attempt is made to calculate nozzle losses.

Tube vibrations in heat exchangers are being systematically investigated in a series of tests performed with an industrial-size test exchanger. Results from water-flow tests of eleven different tube bundles, in six- and eight-cross-pass configurations on a 90 degree square layout with a pitch-to-diameter ratio of 1.25 are reported. The test cases include full tube bundles, no-tubes-in-window bundles, finned tube bundles, and proposed field and design fixes. The testing focused on identification of the lowest critical flow-rate to initiate fluid-elastic instability (large amplitude tube motion) and the location within the bundle of the tubes which first experience instability. The test results are tabulated to permit comparison with results obtained from previous tests with a 30 degree triangular layout tube bundle. Instability criteria are evaluated preliminarily. Pressure drop data are also generated and reported.

An accelerator group was established at ANL by the request of KFA-Juelich to carry out a conceptual design study and cost estimate for a rapid-cycling synchrotron as a possible first stage program on spallation neutron sources at KFA-Juelich. This set of notes is the individual notes which form the basis of the final report under this proposal prepared in January 1983. This document contains 37 papers/notes for Advanced Accelerator Development - Neutron Source Series Notes...numbered AAD-N-1 through AAD-N-37. Each note or paper is written by various authors.

The TOEPLITZ package is a collection of Fortran subroutines for the numerical solution of systems of linear equations with coefficient matrices of Toeplitz or circulant form. This report provides a description of the algorithms and software in the package and includes program listings.

Tests are conducted for tubes conveying fluid for six types of support conditions. The objectives are to understand the dynamic characteristics of such systems for different support conditions and to explore the methods to control tube stability. Transition from one instability mechanism to another is examined, and the feasibility of using feedback control to increase the critical flow velocity is demonstrated.

A process is being developed by the Sodium Waste Technology Program at ANL-W to remove metallic sodium from scrap and waste. The final step in the process is the removal of residual metallic sodium by evaporation at temperatures up to 482 C (900 F) and at pressures of about 10⁻² torr (1.3 Pa). Efficient operation of this process requires that the operators have a method to indicate the completion of the evaporation. This end point would signify when the chamber and scrap and waste is free of metallic sodium. It was determined that a measure of the vacuum was not sufficiently sensitive, and a research effort was undertaken to select an on-line monitoring device. In this effort, three promising methods were reviewed. The use of quadrupole mass spectrometer was recommended and an on-line device was designed for use in a Sodium Process Demonstration (SPD) Plant.

This report describes the preparation of a series of manganese oxides and an analysis of their sorptive, structural, and surface characteristics as low-energetic desiccants for passive dehumidification and active desiccant cooling systems. A cusped Type III isotherm for the adsorption of water is reported for the first time. The data are interpreted as evidence of a first-order phase change from a two-dimensional gas to a liquid film in the first reversibly adsorbed layer. It appears that the water adsorption characteristics of MnO2 compared to standard desiccants which exhibit Type II isotherms are due at least in part to differences in the physical topography and electronic properties of the desiccant substrates: MnO2 is a p-type semiconductor with essentially-flat, monoenergetic surface structures, while standard desiccants like silica gel are electronic insulators with irregular, heteroenergetic surfaces.

The need to understand concrete behavior under high temperatures in the nuclear industry has become rather acute. For this purpose, a constitutive model of concrete especially developed for this severe environment is indispensable. This report reviews the presently available constitutive models of concrete at standard-temperature conditions and considers their advantages and drawbacks. A rather simple but effective approach is selected to treat concrete behavior at high temperatures. Special emphasis is devoted to the modeling of concrete up to and including failure. The derived constitutive model is checked with biaxial and triaxial benchmark experimental results. Very good agreement is obtained.

Measurements of the optical properties of metallic aluminum are reviewed and available data are analyzed to obtain the bulk values of the optical constants and the complex dielectric function from 0.04 eV to 10 keV. The intra- and interband contributions to the dielectric function are discussed briefly, and recently proposed values for the Drude parameters describing the intraband absorption are critically considered. Factors influencing experimental measurements are discussed with emphasis on sample properties such as surface oxide layers, bulk inclusion of gases, surface roughness, and degree of crystallinity. The results of recent optical measurements are tabulated, along with recommended values of the optical properties resulting from a self-consistent Kramers-Kronig analysis of reflectance, transmission, and electron-energy-loss studies. The tabular data include the complex dielectric function, the complex index of refraction, and the reflectance and phase shift for normal incidence on a smooth, oxide-free surface. Detailed tabulations are given for the infrared, visible, and ultraviolet regions of the spectrum.

As part of the Solar Reliability and Materials Program at Argonne National Laboratory, the atmospheric corrosion of candidate batten and enclosure materials were tested on outdoor racks parallel to the tilted solar-collected panels at nine National Solar Data Network (NSDN) sites, located in mild marine, mild industrial, and rural environments. The candidate materials evaluated include galvanized steel (G-90), aluminized steel (Type 2), aluminum (6061), and white polyester painted steel. Data analyses predicted that all the first three materials will last more than 20 years in the nine sites tested. However, repainting of the painted steel is probably needed within five years in a mild marine environment and five to ten years in a mild industrial or rural environment.

As part of the Solar Reliability and Materials Program at Argonne National Laboratory, metal corrosion associated with thermal cycling at 82 C circulating and 176 C stagnating temperatures of propylene glycol and ASTM corrosive water mixture (50% v/o) was investigated. Preliminary data indicate that in a mixed metal system of copper, steel, and aluminum specimens stagnating together in a glycol solution, the copper randomly pits and the pitting stops when the pit depth extends to about 1-1/2 mil. The addition of 1% molybdate as an inhibitor to the glycol solution is slightly beneficial for steel, but the added expense of adding and maintaining the concentration of an inhibitor may not be warranted. Dissolved copper rapidly deposits on the aluminum surface and promotes severe galvanic corrosion.

The primary-coolant flow paths of a reactor system are usually subject to close scrutiny in a design review to identify potential flow-induced vibration sources. However, secondary-flow paths through narrow gaps in component supports, which parallel the primary-flow path, occasionally are the excitation source for significant vibrations even though the secondary-flow rates are orders of magnitude smaller than the primary-flow rate. These so-called leakage flow problems are reviewed here to identify design features and excitation sources that should be avoided. Also, design rules of thumb are formulated that can be employed to guide a design, but quantitative prediction of component response is found to require scale-model testing.

A central solar-heating plant with seasonal heat storage in a deep underground aquifer is designed by means of a solar-seasonal-storage-system simulation code based on the Solar Energy Research Institute (SERI) code for Solar Annual Storage Simulation (SASS). This Solar Seasonal Storage Plant is designed to supply close to 100% of the annual heating and domestic-hot-water (DHW) load of a hypothetical new community, the Fox River Valley Project, for a location in Madison, Wisconsin. Some analyses are also carried out for Boston, Massachusetts and Copenhagen, Denmark, as an indication of weather and insolation effects. Analyses are conducted for five different types of solar collectors, and for an alternate system utilizing seasonal storage in a large water tank. Predicted seasonal performance and system and storage costs are calculated. To provide some validation of the SASS results, a simulation of the solar system with seasonal storage in a large water tank is also carried out with a modified version of the Swedish Solar Seasonal Storage Code MINSUN.

Report discussing a project to design, build, and test a latent heat storage device using cross-linked, high-density polyethylene (HDPE). This report provides an update on progress up to the point that the device is ready to test.

Fluid damping plays an important role for structures submerged in fluid, subjected to flow, or conveying fluid. This design guide presents a summary of calculational procedures and design data for fluid damping for circular cylinders vibrating in quiescent fluid, crossflow, and parallel flow.