This paper is organized in the following manner. In the second section we discussed absorption; the dependence of scattered light signatures of parametric instabilities occurring at n/sub e/ less than or equal to n/sub c//4 on corona size is shown in section three; and evidence for suprathermal electron production in these long-scale length plasmas is presented in section four. The results and conclusions are finally summarized in section five.

This lecture describes the physics considerations entering the magnet design of a quadrupole-stabilized, tandem-mirror system.

This paper discusses the use of ORACLE at the Fusion Experiments Analysis Facility (FEAF) for the laser program of the Lawrence Livermore National Laboratory. The mission of this VAX based computing facility is to aid laser program scientists and engineers develop their understanding of inertial confinement fusion target behavior. We have incorporated the ORACLE DBMS as a major part of an integrated data management and analysis environment for accomplishing this task. We discuss our use of ORACLE through all phases of data processing from raw digital forms to final physics summary data. Applications include: an information management tool for maintaining large amounts of one- and two-dimensional data, a configuration management tool for experiment setup information, and a data analysis tool for maintaining calibration and sensor response data.

Efforts directed at finding a 10 kHz switch to replace the current 1 kHz gas blown spark gap have culminated in a prototype for an upgrade of ATA. The design and performance of this prototype as well as possible options and recommendations concerning an eventual upgrade are described. 4 references, 9 figures.

Techniques for vectorizing complex logic are shown using a decoupled sliding-surface calculation that is part of a two-dimensional Lagrangian simulation model. The same source coding can be run on many vector, parallel, and multiprocessor computers with very little or no alteration. The vectorizing techniques have been used for a wide range of problems.

Three points are emphasized: that the solar flare is that particular astrophysical phenomenon that is the extremum of reconnection, no other phenomenon demands as rapid magnetic flux annihilation as is seen in the solar flare; that plasma physics experiments can and should be performed in the laboratory that model reconnection as we observe it in astrophysics; and that stochastic field lines derived from something similar to Alfven wave turbulence are a necessary part of reconnection.

Examples are given of time-resolved beam profiles measured on ETA using several techniques. One method uses a Faraday cup that is remotely movable in two-transverse dimensions (x, y). In another method a small diameter wire or pellet target is moved across the beam and the bremsstrahlung x-ray intensity is plotted. Data for these methods are recorded using a Tektronix 7912 digitizer at 16 equally spaced times during 50 ns. Three other methods use a time gated (4 ns) microchannel plate television camera to record a two-dimensional image of the beam intensity on a single pulse. The light sources used for imaging are: Cherenkov light from a Kapton foil, prompt visible light from a titanium foil and radiated light from gas molecules excited by the beam. We are also testing an x-ray pinhole camera using K/sub ..cap alpha../ x-rays from tungsten.

The Nova laser system for Inertial Confinement Fusion studies at Lawrence Livermore National Laboratory is under construction and will be completed October 1984 with first operations scheduled for 1985. This system is the largest precision opto-mechanical engineering system ever built. Major engineering and subsystems are mechanical, optical, and electrical power. A series of system technologies include alignment, diagnostics, target, frequency conversion, and controls. This paper will only discuss the mechanical system.

As a result of the accident on March 28, 1979, fuel debris was dispersed into the primary coolant system of the Three Mile Island Unit 2 (TMI-2) reactor. Location and quantification of fuel debris is essential for TMI-2 recovery. TMI-2 fuel debris assessments can be carried out nondestructively by neutron and gamma-ray dosimetry. Efforts to date have been directed toward fuel debris characterization of the makeup and purification demineralizers, will maintain reactor coolant water purity. Two highly specialized dosimetry methods were applied: solid state track recorder (SSTR) neutron dosimetry and continuous gamma-ray spectrometry. The most recent dosimetry results are reviewed and compared. To reduce the intense background radiation from /sup 137/Cs, the Si(Li) detector was surrounded by a 5.5 diameter lead shield 8'' shield in length. The spectral data were used to determine the intensity of the 2.18 MeV gamma ray from the fission product /sup 144/Ce. Assuming this fission product does not migrate out of the fuel, the quantity of /sup 144/Ce is directly related to the quantity of fuel present. Based on the observed source geometry and the measured flux of the /sup 144/Ce 2.18 MeV gamma rays, the fuel content of the A demineralizer was calculated to …