A procedure has been developed to determine 21 trace impurity elements in uranium hexafluoride, using inductively coupled argon plasma emission spectrometry (ICAP). The method consists of a liquid-liquid extraction to separate uranium from the trace impurities with a mixture of tri-(2-ethyl-hexyl)-phosphate (TEHP) and heptane. The raffinate containing the elements is subsequently analyzed by ICAP. The impurity elements which can be analyzed by this method are: Al, B, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Na, Ni, Pb, Sb, Sn, Ti, V and Zn.

A Decision Tree Computer Model was adapted for the purposes of a Pilot Salt Site Selection Project conducted by the Office of Nuclear Waste Isolation (ONWI). A deterministic computer model was developed to structure the site selection problem with submodels reflecting the five major outcome categories (Cost, Safety, Delay, Environment, Community Impact) to be evaluated in the decision process. Time-saving modifications were made in the tree code as part of the effort. In addition, format changes allowed retention of information items which are valuable in directing future research and in isolation of key variabilities in the Site Selection Decision Model. The deterministic code was linked to the modified tree code and the entire program was transferred to the ONWI-VAX computer for future use by the ONWI project.

Liquid lithium was selected as one of the coolants for the 1983 fusion breeder blanket used on the magnetically confined tokamak fusion reactor, and as a result, the thermal-hydraulic calculations were dominated by magnetohydrodynamic (MHD) considerations. The applicable sets of MHD equations for the engineering thermal-hydraulic design were reviewed and compared. Special attention was given to the MHD calculations for the fertile material zone, a packed bed of composite beryllium and thorium balls, since this region can dominate the thermal-hydraulic behavior of this blanket module. To keep the pressure drops acceptable, fertile fuel balls were omitted in the inboard blanket.

A structural compaction model is used to correlate NSWC quasi-static compaction data on porous beds of six (6) different materials, i.e., four (4) ball powders, melamine, and Teflon. Initial densities of the porous beds ranged from 44 percent solid theoretical maximum density (TMD) to 70 percent TMD. Maximum compacted densities were about 90 percent TMD except for Teflon which was compacted to approximately 98 percent TMD. Pressures calculated by the model, plotted as a function of percent TMD, agree well with the NSWC data.

None

Recent developments of transition radiation detectors (TRD's) indicate that an efficient and practical system can be deployed for beam line particle tagging for momenta greater than 200 GeV/c. This note describes the design of a prototype system to be tested at Fermilab in Fall, 1983. Pre-prototype testing was done at BNL in March, 1983 and has been followed up by bench testing of gasses and electronics at Fermilab. The design goal is a modular system which puts few contraints on beam line configuration and hence can be adapted to any high energy secondary beam.

None

None