As experiments continue to grow in size and complexity, a few technicians will no longer be able to maintain and operate the complete experiment. Specialization is becoming the norm. Subsystems are becoming very large and complex, requiring a great deal of experience and training for technicians to become qualified maintenance/operation personnel. Formal in-house and off-site programs supplement on-the-job training to fulfill the qualification criteria. This paper presents the Tandem Mirror Experiment-Upgrade (TMX-U) approach to manpower staffing, some problems encountered, possible improvements, and safety considerations for the successful operation of a large experimental facility.

The metabolism and toxicity of 3-methylfuran (3-MF) are described. The major product of metabolic activation of 3-MF appears to be disemicarbazones. Cursory description of toxic effects of 3-MF on lung and kidneys are provided. 18 refs.

Pacific Northwest Laboratory (PNL) tested the catalytic gasification of bagasse for the production of methanol synthesis gas. The process uses steam, indirect heat, and a catalyst to produce synthesis gas in one step in fluidized bed gasifier. Both laboratory and process development scale (nominal 1 ton/day) gasifiers were used to test two different catalyst systems: (1) supported nickel catalysts and (2) alkali carbonates doped on the bagasse. This paper presents the results of laboratory and process development unit gasification tests and includes an economic evaluation of the process. 20 references, 6 figures, 9 tables.

The meeting consisted of the following six sessions: (1) plenary session I; (2) disposal technology; (3) characteristics and treatment of low-level waste; (4) environmental aspects and performance prediction; (5) overall summary sessions; and (6) plenary session II. Fifty two papers of the papers presented were processed for inclusion in the Energy Data Base. (ATT)

We have made calculations of the ionization spectra for alpha particle and electron tracks in water. We have also computed the number of ions created per micrometre of track length, the energy distribution of the secondaries, and the energy expended per ion pair created. Our aim is less toward theoretical derivations than to obtain a numerically accurate description of the track structure at all energies in a form suitable for biomedical applications. 13 references.

Classical variational techniques are used to obtain accurate solutions to the multigroup multiregion one dimensional steady state neutron diffusion equation. Analytic solutions are constructed for benchmark verification. Functionals with cubic trial functions and conservational lagrangian constraints are exhibited and compared with nonconservational functionals with respect to neutron balance and to relative flux and current at interfaces. Excellent agreement of the conservational functionals using cubic trial functions is obtained in comparison with analytic solutions.

A measurement of the nu/sub ..mu../e elastic scattering cross section is presented. These data analyzed were run at the Brookhaven AGS wide band neutrino beam ((E/sub nu/) = 1.5 GeV).

A discussion is presented concerning the method of setting up a saddle field ion source for sputtering thin films. Preliminary results will be presented for sputtering rates of different materials.

High power ion cyclotron radio frequency (ICRF) systems are now gaining greater attention than before as prime driver ion heating systems. Lawrence Livermore National Laboratory (LLNL) has installed a 200 kW high frequency (HF) transmitter system on its Tandem Mirror Experiment-Upgrade (TMX-U). This paper describes the system, antenna, controls, and monitoring apparatus. The transmitter operates into a high Q antenna installed in the central cell region of the experiment. It incorporates a dual-port feedback system to automatically adjust the transmitter's output power and allow the maximum consistent with the plasma loading of the antenna. Special techniques have been used to measure, in real-time, the dynamically changing loading values presented by the plasma. From the measurements, the antenna impedance can be optimized for specified plasma density.

The advantages of heavy ion beams as a way of delivering the needed energy and power to an inertial fusion target are surveyed. The existing broad technology base of particle accelerators provides an important foundation for designing, costing, and evaluating proposed systems. The sequence of steps needed for the verification of the heavy ion approach is described; recent research results are even more encouraging than had been assumed hitherto.

A brief study was carried out to determine the feasibility of a special kicker to produce a damped spiral beam at the beam dump for the beam abort system. There appears to be no problem with realizing this concept at a reasonably low cost.

Development of high-power components for electron cyclotron resonant heating (ECRH) applications requires extensive testing. In this paper we describe the high-power testing of various circular waveguide components designed for application on the Tandem Mirror Experiment-Upgrade (TMX-U). These include a 2.5-in. vacuum valve, polarizing reflectors, directional couplers, mode converters, and flexible waveguides. All of these components were tested to 200 kW power level with 40-ms pulses. Cold tests were used to determine field distribution. The techniques used in these tests are illustrated. The new high-power test facility at Lawrence Livermore National Laboratory (LLNL) is described and test procedures are discussed. We discuss the following test results: efficiency at high power of mode converters, comparison of high power vs low power for waveguide components, and full power tests of the waveguide system. We also explain the reasons behind selection of these systems for use on TMX-U.

A major challenge for laser fusion is the study of the symmetry and the hydrodynamic stability of imploding fuel capsules. Streaked x-radiography, in one space and one time dimension, does not provide sufficient information. Two (spatial) dimensional frames of 10 to 100 ps duration are required with good image quality, minimum geometrical distortion (approximately 1%), dynamic range greater than 1000 and greater than 200 x 200 pixels. A gated transmission line imager (TLI) can meet these requirements with frame times between 30 and 100 ps. An instrument of this type is now being developed. Progress on this instrument including theory of operation, ultrafast pulse generation and propagation, component integration, and high resolution phosphor screen development are presented.

The neutronics aspects of an ICF hybrid concept are discussed. The breeding blanket consists of a beryllium neutron multiplier, metallic thorium fertile fuel and a liquid-lithium coolant. The fertile fuel fraction is 30 vol%, which is much higher than previous one-zone, suppressed-fission hybrid concepts. Fission in the bred /sup 233/U is suppressed by competition from tritium breeding reactions in /sup 6/Li. The total breeding ratio, T + F, is 2.05, and the total neutron energy deposited is 41.1 MeV per DT neutron. The 800-MW (fusion) hybrid produces approx. 3500 kg of /sup 233/U per full-power-year.

An ion-atom collision produces a time dependent perturbation of a many fermion system. In this collision, excitation, ionization and charge transfer can occur. The driving mechanism for these processes may be thought of as the potentials seen by individual electrons at any given separation of the projectile and target nuclei. If we think of these potentials as belonging to the target (a nucleus and electrons) and the projectile (another nucleus and electrons) then as detected by an electron the potentials change because: (a) the target and projectile change position, and (b) electrons on the target and projectile change states. Most work in the past fifty years has concentrated on solving the independent particle model (IPM). Cracks are beginning to appear in this model which only allows for type (a) changes in the potential. But in a short review we shall have quite enough to do in understanding the progress made in the last decade on the IPM. This paper is divided into three parts. The first deals with how to reduce the IPM to the single electron model (SEM). The second is on a new method where charge transfer is important. The third confronts some standard models with modern calculations.

The deposition rates of radon daughters on indoor surfaces have been measured by exposing the window of a proportional counter to the air of a house with high concentrations of radon and its daughters. Deposition velocities for unattached RaA and RaB of approximately 4 mm sec/sup -1/ were obtained by dividing the deposition rates by the concentrations of unattached daughters in the air. These results agree with those obtained by other workers but are dependent on the assumptions made about the fractions of the daughters which are attached to the atmospheric aerosol.

Constant extension rate tests have been performed on sensitized Type 316 stainless steel in oxygenated water (8 ppM O/sub 2/) containing chloride ion impurities (0.5 ppM) over a range of strain rates from 10/sup -5/ to 2 x 10/sup -7/ s/sup -1/. The susceptibility to IGSCC (as quantified by parameters such as crack length at failure) increases with a decrease in strain rate. A model consistent with the observed and postulated crack growth behavior and with a fracture criterion is presented and used to derive power laws that relate the IGSCC susceptibility parameters and strain rate. The predicted strain rate exponents are in agreement with the experimental results of this and other studies. The correlations between IGSCC susceptibility and strain rate can be used to predict susceptibility to cracking outside the range of conditions used in the laboratory. In addition, it is shown that the average crack-tip strain rate in CERT experiments can be estimated by use of a J-integral approach. It is observed that the average crack growth rate is proportional to the square root of the estimated average crack-tip strain rate. The experimentally observed correlation is in good agreement with that deduced from a slip-dissolution model proposed by …

About 200 refractory metal clad ceramic fuel pins have been irradiated in thermal reactors under the 1200 K to 1550 K cladding temperature conditions of primary relevance to space reactors. This paper reviews performance with respect to fissile atom density, operating temperatures, fuel swelling, fission gas release, fuel-cladding compatibility, and consequences of failure. It was concluded that UO/sub 2/ and UN fuels show approximately equal performance potential and that UC fuel has lesser potential. W/Re alloys have performed quite well as cladding materials, and Ta, Nb, and Mo/Re alloys, in conjunction with W diffusion barriers, show good promise. Significant issues to be addressed in the future include high burnup swelling of UN, effects of UO/sub 2/-Li coolant reaction in the event of fuel pin failure, and development of an irradiation performance data base with prototypically configured fuel pins irradiated in a fast neutron flux.

A research program is under way to evaluate and develop improve leak detection systems. The primary focus of the work has been on acoustic emission detection of leaks. Leaks from artificial flaws, laboratory-generated IGSCCs and thermal fatigue cracks, and field-induced intergranular stress corrosion cracks (IGSCCs) from reactor piping have been examined. The effects of pressure, temperature, and leak rate and geometry on the acoustic signature are under study. The use of cross-correlation techniques for leak location and pattern recognition and autocorrelation for source discrimination is also being considered.

The Large Coil Test Facility (LCTF) project is comprised of the test stand, supporting cryogenic systems, instrumentation, data acquisition, and utilities necessary for testing the large superconducting coils of the Large Coil Program (LCP). A significant portion of the facility hardware has been obtained through procurement actions with industrial suppliers. This paper addresses the project's experience in formulation and execution of quality assurance (QA) actions relative to several of the major items procured. Project quality assurance planning and specific features related to procurement activities for several of the more specialized test facility components are described. These component procurements include: (1) the coil test stand's major structural item (the bucking post) purchased from foreign industry; (2) fabrication and testing of high-current power supplies; (3) industrial fabrication of specialized instrumentation (voltage-tap signal conditioning modules); and (4) fabrication, installation, and testing of the liquid helium piping system.

The collective dose equivalent at nuclear power plants increased from 1250 rem in 1969 to nearly 54,000 rem in 1980. This rise is attributable primarily to an increase in nuclear generated power from 1289 MW-y to 29,155 MW-y; and secondly, to increased average plant age. However, considerable variation in exposure occurs from plant to plant depending on plant type, refueling, maintenance, etc. In order to understand the factors influencing these differences, an investigation was initiated to study dose-reduction techniques and effectiveness of as low as reasonably achievable (ALARA) planning at light water plants. Objectives are to: identify high-dose maintenance tasks and related dose-reduction techniques; investigate utilization of high-reliability, low-maintenance equipment; recommend improved radioactive waste handling equipment and procedures; examine incentives for dose reduction; and compile an ALARA handbook.

The Pierce design acceleration column has been widely used to accelerate high current beams. It operates well in the space charge limited condition, and will produce beams with a temperature comparable with that of the source. It is restricted in current density, however, by the Child-Langmuir relation. If the ion source itself is not the limiting constraint, then the achievable current density is limited by the electric field at which sparking occurs. One sees clearly that the achievable current density decreases as one goes to higher voltages. This can be easily overcome by using electrostatic quadrupole focusing in the acceleration column. Now it can be shown that the space charge limited current density in a constant energy quadrupole transport channel is greater than that if one assumes that the electric fields on the quadrupoles can be as high in the ion source extraction electric fields. In practice, this is a conservative assumption. It follows that if the beam can be transported a large distance at the C-L current density limit, it can surely be accelerated as it goes from quadrupole to quadrupole. Hence, the necessity of having a high gradient acceleration column goes away.

Calculations have been done to estimate the circulating current necessary to induce the onset of a pressure bump instability in a cold bore storage ring. For a wide range of storage ring parameters, the instability threshold current is more than an order of magnitude higher than the operating current. 4 references, 2 tables.

This summary presents results obtained from a preliminary analysis of gas behavior and oxide fuel response during an LMFBR operational transient. The DiMelfi and Deitrich model is extrapolated to operational transient regimes to delineate brittle versus ductile fuel response modes. All pertinent parameters necessary for application of the DiMelfi and Deitrich model were obtained from the LIFE-3 code.