Draft of an article by John J. Herrera published in the Houston Chronicle on November 21, 1983. The article, titled "My 17 Minutes with John F. Kennedy", recounts Kennedy's trip to Houston and the brief time Herrera was able to spend with him. It also describes how Herrera and his family heard the news of Kennedy's assassination the following day.

This article discusses direct ionization and electron capture in M-shell x-ray production by fluorine ions.

Article on ₁¹H+ and ₂⁴He+ -induced M-shell x-ray-production cross sections for selected elements in the rare-earth region.

Article on isentropic compressibility of an ideal ternary solution.

Article on the thermochemical excess properties of multicomponent systems and representation and estimation from binary mixing data.

Article on thermochemical investigations of associated solutions and the calculation of solute-solvent equilibrium constants from solubility measurements.

Article on solubility in binary solvent systems III and predictive expressions based on molecular surface areas.

This article provides comments on "Generalized corresponding-states method for the prediction of surface tension of pure liquids and liquid mixtures," published in the 'Journal of Colloid and Interface Science' in 1982.

The rates of polymerization and disproportionation of Pu(IV) have been studied using low concentrations: (1.7 - 10) x 10{sup -}M Pu, (0.8 - 12) x 10{sup -}M HCl and 0.0iM ionic strength. Osmium(II) complexes such as the tris-4,4`-2,2`-bipyridine complex were found to react rapidly with Pu(IV) but very slowly, if at all, with Pu(IV) polymer, Pu(III), or Pu(V). Thus, it is possible to determine unreacted Pu(IV) in the presence of rection products by using Os(II) complexes. Disproportionation reaction products, Pu(III) and Pu(V), were determined using their reactions with Ce(IV) sulfate. We find -d[Pu(IV)]/dt = k`[Pu(IV)]{sup 2} at constant pH. Log k` varies from about 4.25 at pH 3 to about 7.0 at pH 4.1 (units for k` are M{sup -1}min{sup -1}). The [H{sup +}] dependence varies from about -2 to -3 over the pH range studied. The measured rate is the sum of those for polymerization and disproportionation; the latter reaction amounts to about 75% of the total at pH 3 and 20% at pH 4. The second-order rate constants for disproportionation are very much larger than expected on the basis of extrapolation from 0.2 to 1.0M HC10{sub 4} solutions. The products of the reaction do not affect the rate, …

The unsaturated, fractured tuff of Yucca Mountain in the Nevada Test Site is one of the target sites for geologic storage of high-level radioactive waste. A modeling study of flow and transport in this geologically complex site is presented. Numerical models of mass and heat flow in conjunction with analytical solutions are being used for sensitivity and pathway analysis studies and to aid in design and interpretation of laboratory and field flow and transport tests in tuff. 11 references, 9 figures, 1 table.

The physical processes modeled and the mathematical and numerical methods employed in a simulator for non-isothermal flow of water, vapor, and air in permeable media are briefly summarized. The simulator has been applied to study thermo-hydrological conditions in the near vicinity of high-level nuclear waste packages emplaced in unsaturated rocks. The studies reported here specifically address the question whether or not the waste canister environment will dry up in the thermal phase. 13 references, 8 figures, 2 tables.

Lawrence Livermore National Laboratory is involved in the design and testing of high-level nuclear waste packages. Many of the aspects of waste package design and testing (e.g., corrosion and leaching) depend in part on the temperature history of the emplaced packages. This paper discusses thermal modeling and analysis of various emplaced waste package conceptual designs including the models used, the assumptions and approximations made, and the results obtained. 6 references, 6 figures, 3 tables.

Geologic repositories for radioactive waste are evolving from conceptualization to the development of specific designs. Estimates of long-term hazards must be based upon quantitative predictions of environmental releases over time periods of hundreds of thousands of years and longer. This paper summarizes new techniques for predicting the long-term performance of repositories, it presents estimates of future environmental releases and radiation doses that may result for conceptual repositories in various geologic media, and it compares these predictions with an individual dose criterion of 10{sup -4} Sv/y. 50 references, 11 figures, 6 tables.

The National Waste Terminal Storage Program is a national search for suitable sites to isolate commercial spent nuclear fuel or high-level radioactive waste. The Nevada Nuclear Waste Storage Investigation (NNWSI) managed by the U.S. Department of Energy (DOE), Nevada Operations Office, was initiated to study the suitability of a portion of Yucca Mountain on the DOE`s Nevada Test Site (NTS) as a location for such a repository. EG and G was contracted to provide information concerning the ecosystems encountered on the site. A comprehensive literature survey was conducted to evaluate the status and completeness of the existing biological information for the previously undisturbed area. Site specific studies were begun in 1981 when preliminary field surveys confirmed the presence of the desert tortoise (Gopherus agassizi) within the project area FY82 studies were designed to determine the overall distribution and abundance of the tortoise within the area likely to be impacted by NNWSI activities. The Yucca Mountain area of the Nevada Test Site is situated close to the northern range limit of the desert tortoise. Prior to the 1982 surveys, the desert tortoise was reported from only nine locations on NTS. A known population had been under study in Rock Valley about …

Design, modeling, and testing activities are under way at LLNL in the development of high level nuclear waste package designs. We discuss the geological characteristics affecting design, the 10CFR60 design requirements, conceptual designs, metals for containment barriers, economic analysis, thermal modeling, and performance modeling.

The development of waste packages for emplacement in a tuff repository has been proceeding during the past year on a broad front. Experimental work has been focused on determination of important package environment parameters and testing the response of waste forms and package materials to the anticipated environment. Conceptual designs have been selected with alternatives to accommodate present uncertainties in the environment and material performance. Computational capabilities are being adapted to provide analyses of anticipated package performance, and plans are being developed for in-situ testing. The waste package activities have been integrated into the overall NNWSI project to assure timely completion consistent with the statutory and regulatory requirements leading to repository site selection around the end of the decade. 7 references.

During 1982, Congress considered legislation to provide for the development of repositories for the disposal of high-level radioactive waste and spent nuclear fuel. The result of this legislative effort was the Nuclear Waste Policy Act of 1982 (NWPA), PL 97-425, signed into law January 7, 1983. An important part of the NWPA was the establishment of special funds in the US Treasury for Waste Disposal and Interim Storage to be financed by user fees to pay for all costs of the program. An initial fee of 1.0 mill per kilowatt-hour was specified. The Secretary was asked to annually review the amount of the fees established... to evaluate whether collection of the fee will provide sufficient revenues to offset the costs... In the event of a prospective fee cost mismatch, the Secretary was asked to propose an adjustment to the fee to insure full cost recovery. A series of studies were sponsored by DOE in 1982 to estimate program costs, to calculate the necessary fees to assure cost recovery, and to address uncertainties that could affect future program costs and consequent fee schedules. A brief summary of the 1982 cost estimates is presented. Sources of key cost uncertainties are discussed and …

Nuclear waste emplacement in devitrified volcanic tuff at Yucca Mountain will raise the temperature of surrounding rock for a geologically significant period of time. This study evaluates the susceptibility of an underlying 50-ft-thick vitrophyre to thermal alteration by examining alteration that occured in the rock as it cooled after deposition. A 10{sup 0}C temperature rise should have no mineralogical effects on the vitrophyre, but an increase of 60{sup 0} or more is likely to result in alteration. Expected mineralogic changes in the vitrophyre caused by this amount of thermal loading include crystallization of zeolites and smectite. Alteration will be concentrated of zeolites and smectite. Alteration will be concentrated in a thin interval near the top of the vitrophyre and along fractures. Adsorbed water and water in preexisting hydrous minerals and in glass may contribute to hydrothermal alteration of underlying vitrophyre. Bulk porosity change would be slight and local porosity increase would probably be restricted to the upper part of the vitrophyre. Although some fracture filling could occur, such a minor sealing effect would be balanced by development of secondary porosity. Zeolites and smectite, newly-crystallized along fluid flow paths below the waste repository, could provide an enhanced sorptive barrier to radionuclide …

An experimentally oriented program has been initiated to support the NRC analysis and licensing activities related to high-level nuclear waste repositories. The program will allow the NRC to independently confirm key geochemical values used in the site performance assessments submitted by the DOE candidate repository site projects. Key radionuclide retardation factor values, particularly radionuclide solubility and sorption values under site specific geochemical conditions, are being confirmed. The initial efforts are being directed toward basalt rock/groundwater systems relevant to the BWIP candidate site in the Pasco Basin. Future work will consider tuff (NNWSI candidate site in Yucca Mountain) and salt (unspecified ONWI bedded or domal salt sites) rock/groundwater systems. Initial experimental results with technetium have confirmed the BWIP values for basalt/groundwater systems under oxic redox conditions: high solubility and no sorption. Under reducing redox conditions, however, the experimental work did not confirm the proposed technetium values recommended by BWIP. In the presence of hydrazine to establish reducing conditions, an apparent solubility limit for technetium of about 5E-7 mol/L was encountered; BWIP recommended calculated values of 1E-12 or greater than or equal to 1E-14 mol/L. Experimental evidence concerning sorption of reduced technetium species is incomplete at this time. Equilibrium speciation and saturation …

A waste form testing program has been developed to ensure that the release rate of radionuclides from the engineered barrier system will meet NRC and EPA regulatory requirements. Waste form performance testing will be done under unsaturated, low water availability conditions which represent the expected repository conditions. Testing will also be done under conditions of total immersion of the waste form in repository-type water to cover the possibility that localized portions of the repository might contain standing water. Testing of reprocesses waste forms for CHLW and DHLW will use reaction vessels fabricated from Topopah Spring tuff. Chemical elements which are expected to show the highest release rates in the mildly oxidizing environment of the Topopah Spring tuff horizon at Yucca Mountain are Np and Tc. To determine the effect of residual canister material and of corrosion products from the canister/overpack, waste form testing will be done in the presence of these materials. The release rate of all radionuclides which are subject to NRC and EPA regulations will be measured, and the interactive effects of the released radionuclide and the rock reaction vessels will be determined. The testing program for spent fuel will determine the release rate from bare spent fuel …

The Nevada Nuclear Waste Storage Investigations (NNWSI) project under the Civilian Radioactive Waste Management Program is planning a repository at Yucca Mountain at the Nevada Test Site for isolation of high-level nuclear waste. Lawrence Livermore National Laboratory is developing designs for an engineered barrier system containing several barriers such as the waste form, a canister and/or an overpack, packing, and near field host rock. In this paper we address the selection of metal containment barriers. 13 references, 4 tables.

Results from a long-term (9 year) field study of the distribution of radionuclides around an underground nuclear explosion cavity at the Nevada Test Site are reviewed. The goals of this Radionuclide Migration project are to examine the rates of migration underground in various media and to determine the potential for movement, both on and off the Nevada Test Site, of radioactivity from such explosions, with particular interest in possible contamination of water supplies. Initial studies were undertaken near the site of the low-yield test Cambric, which was detonated 73 m beneath the water table in tuffaceous alluvium. Solid samples were obtained from just below ground surface to 50 m below the detonation point, and water was sampled from five different regions in the vicinity of the explosion. Ten years after the test, most of the radioactivity was found to be retained in the fused debris in the cavity region and no activity above background was found 50 m below. Only tritium and {sup 90}Sr were presented in water in the cavity at levels greater than recommended concentration guides for water in uncontrolled areas. A satellite well is being used to remove water 91 m from the detonation point. During seven …

In support of the Spent Fuel Test-Climate at the U.S. Department of Energy`s Nevada Test Site, a spent-fuel canister handling system has been designed, deployed, and operated successfully during the past five years. This system transports encapsulated commercial spent-fuel assemblies between the packaging facility and the test site ({similar_to}100 km), transfers the canisters 420 m vertically to and from a geologic storage drift, and emplaces or retrieves the canisters from the storage holes in the floor of the drift. The spent-fuel canisters are maintained in a fully shielded configuration at all times during the handling cycle, permitting manned access at any time for response to any abnormal conditions. All normal operations are conducted by remote control, thus assuring as low as reasonably achievable exposures to operators; specifically, we have had no measurable exposure during 30 canister transfer operations. While not intended to be prototypical of repository handling operations, the system embodies a number of concepts, now demonstrated to be safe, reliable, and economical, which may be very useful in evaluating full-scale repository handling alternatives in the future. Among the potentially significant concepts are: Use of an integral shielding plug to minimize radiation streaming at all transfer interfaces. Hydraulically actuated transfer …

The Nevada Nuclear Waste Storage Investigation (NNWSI) project under the Civilian Radioactive Waste Management Program is planning a repository at Yucca Mountain at the Nevada Test Site for isolation of high-level nuclear waste. LLNL is developing designs for an engineered barrier system containing several barriers such as the waste form, a canister and/or an overpack, packing, and near field host rock. The selection of metal containment barriers is addressed. 13 references.