As part of the Milliwatt Generator (MWG) Program, 12 simulant-fueled heat sources were fabricated double impact tested, and evaluated at Mound. Ten assemblies were tested at approx. 80 m/sec, and two were tested at approx. 105 m/sec. None of the strength members were breached; therefore, no fuel would have been released as a result of double impacts at the velocities and orientations tested at 450/sup 0/C. There was little difference in results for duplicate tests conducted approx. 80 and approx. 105 m/sec. Ten units contained liners that were embrittled prior to testing. This resulted in cracks in some of the liner that would not have occurred in normally fueled heat sources.

This report documents the technical evaluation of the application to amend the Technical Specifications for the Ft. Calhoun Unit No. 1 Nuclear Generating Plant. The review criteria are based on the Technical Specifications of St. Lucie and Calvert Cliffs, IEEE Standards, Combustion Engineering Standard Technical Specifications, and the Code of Federal Regulations. The evaluation compares the submittal made by the licensee with the NRC staff position and the review criteria and presents the reviewer's conclusion on the acceptability of the application to amend the Technical Specifications.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

This report documents the technical evaluation of the adequacy of the station electric distribution system voltages for the Calvert Cliffs Nuclear Power Plant, Units 1 and 2. The evaluation is to determine if the onsite distribution system in conjunction with the offsite power sources has sufficient capacity to automatically start and operate all Class 1E loads within the equipment voltage ratings under certain conditions established by the Nuclear Regulatory Commission. The analyses submitted demonstrate that adequate voltage will be supplied to the Class 1E equipment under worst case conditions.