A positive, northeast-trending gravity anomaly, 90 km long and 30 km wide, extends southwest from the Zuni uplift, New Mexico. The Zuni-Bandera volcanic field, an alignment of 74 basaltic vents, is parallel to the eastern edge of the anomaly. Lavas display a bimodal distribution of tholeiitic and alkalic compositions, and were erupted over a period from 4 Myr to present. A residual gravity profile taken perpendicular to the major axis of the anomaly was analyzed using linear programming and ideal body theory to obtain bounds on the density contrast, depth, and minimum thickness of the gravity body. Two-dimensionality was assumed. The limiting case where the anomalous body reaches the surface gives 0.1 g/cm/sup 3/ as the greatest lower bound on the maximum density contrast. If 0.4 g/cm/sup 3/ is taken as the geologically reasonable upper limit on the maximum density contrast, the least upper bound on the depth of burial is 3.5 km and minimum thickness is 2 km. A shallow mafic intrusion, emplaced sometime before Laramide deformation, is proposed to account for the positive gravity anomaly. Analysis of a magnetotelluric survey suggests that the intrusion is not due to recent basaltic magma associated with the Zuni-Bandera volcanic field. This …

Annual report of the Argonne National Laboratory Radiological and Environmental Research Division regarding activities related to the Center for Human Radiobiology. This report discusses an inquiry into the mechanisms and dosimetry for induction of malignancies by radium, and studies of individuals exposed to radium and thorium, as well as to other radionuclides,.

Specifications are presented for the Linear Charge Coupled Device (LCCD) developed at the Lawrence Livermore National Laboratory for recording data from transients. This device can be used to record electrical signals at sample rates greater than 10/sup 9/ samples per second. Both electrical and physical specifications of the device are presented. The bias and drive requirements of the device are presented in tables and in timing diagrams. Typical performance data are tabulated and shown in oscilloscope photos. The physical specifications of the device include plane and cross sectional drawings of its various registers and I/O sections. Enlarged photos of the mask set are shown and all critical dimensions of the active regions are given. Finally, the impurity doping profile used for the transfer channels is shown.

Colorado School of Mines is engaged in an experimental program to develop comprehensive models for the effects of coal composition upon the kinetics and mechanisms of coal hydrogenation, for the effects of mineral matter additives (disposable catalysts) upon kinetics and mechanisms of coal hydrogenation, and for the kinetics and mechanisms of the hydrogenation of coal derived products such as preasphaltenes, and asphaltenes. Experimental work was completed on a suite of bituminous coals, thus completing the initial phase of the coal reactivity study. Eleven of the 14 coals of the suite were successfully run in duplicate. Conversion to THF solubles was correlated well by pseudo-second order kinetics. The resulting kinetic rate constants correlated with H/C ratio, mean-max vitrinite reflectance, and a specially-defined fraction of reactive macerals. The data did not correlate well with O/C ratios of the parent coals. Computer-derived statistical fits of various kinetic models were limited in their effectiveness at fitting the experimental data. Experimental work on the first phase of the disposal catalyst studies was completed. Statistical significance testing of the experimental data showed: fractional conversion and yield of light hydrocarbon products increased with time; and mineral properties of the additives were more significant in increasing overall conversion …

This note describes the 2 Word I/O subsystem and details its operating characteristics. SLAC drawings in the 926-306 series support this device and should be referenced for construction and connection details.

Six systems were installed on top of Sierra Grande, a nearly symmetrical mountain in New Mexico about halfway between Raton and Clayton, with a peak of 2659 m (8720 ft msl) standing over a wide mesa of approximately 1829 m (6000 ft msl). Two systems were on the peak, one at 10 m (33 ft) above the surface and the other at 20 m (66 ft) because the peak is often the most probable spot for the greatest wind energy. The two levels were needed to measure variations of speed with height. Four other systems with instruments at 10-m (33 ft) were located roughly north, east, south, and west from the center on secondary ridge lines to measure certain horizontal variations of the wind. The wind direction and speed were measured every 6 minutes, a time interval considerably shorter than the traditional 1 hour but long enough so that all WECS power outputs are expected to respond to these wind speed variations. All six systems were operated for a period of six months between 6 June 1979-5 December 1979.

This report describes the nondestructive (NDA) work done at Los Alamos during 1979 and 1980 as part of the New Brunswick Laboratory-sponsored evaluation of NDA of the uranium content of fabricated fuel rods for high-temperature gas-cooled reactors (HTGR). The methods used (delayed neutron and passive gamma ray) are concisely described, and the results are summarized and compared in graphical and tabular form. The results indicate that, with the use of proper physical standards, accuracies within about 1 percent should be achievable by NDA procedures.

"This report describes a systematic study to determine the relationship between seismicity and geologic or geophysical features for the central and eastern United States in order to delineate seismic hazard."

A three-year program has been conducted to study the chemistry and biological effects of products arising from the low-level chlorination of natural waters. These studies are related to environmental concerns arising from the discharge of chlorine-treated power plant cooling water. The studies have shown that addition of low levels (2 mg/l) of chlorine to natural waters produces haloforms in concentrations which are orders of magnitude lower than the LC{sub 50}'s measured in a number of fresh ana salt water organisms. Chlorination also produces nonhaloform lipophilic organohalogen products in concentrations much lower than the naloforms, although no evidence was obtained which suggested significant olomagnification of these during chronic exposure of juvenile salmon to chlorinated fresh water. No dramatic effects were noted in organisms chronically exposed to chlorinated waters, but changes in general condition were observed.

Observations on the effects of water level fluctuations in the Hanford Reach of the Columbia River, Washington, were made in 1976 and 1977. The two years provided contrasting flow regimes: high water and fluctuations of greater magnitude prevailed in 1976; low water and higher temperatures prevailed in 1977. Situations where fish and other aquatic organisms were destroyed by changing water levels were observed and evaluated each year in three study areas: Hanford, F-Area, and White Bluffs sloughs. Losses primarily were due to stranding, entrapment (with or without complete dewatering), and predation. Juvenile fish were more susceptible to entrapment and stranding than were adult fish. Estimates of actual losses were biased and conservative because relatively few fish could be found after each decline of water level and dewatering. The most valued species of fish affected by water level fluctuations at Hanford were the anadromus fall chinook salmon (Oncorhynchus tshawytscha) and the resident smallmouth bass (Micropterus dolomieui). Crucial periods for chinook salmon occurred during winter when incubating eggs were in the gravel of the main channel, and before and during seaward migration in the spring when fry were abundant in shoreline zones. The crucial period for smallmouth bass was during spring and …

In a novel application of the multiwire proportional counter we have imaged a collimated neutron beam. Although preliminary, the results are of sufficient import to be described here because of the potential wide application of the multiwire proportional counter to Laboratory problems. The counter was operated with a counting gas pressure of 20 Torr; the counting gas was pure C/sub 4/H/sub 10/. The radiator was a /sup 235/U foil. Under these conditions, the counter is (1) relatively insensitive to charged particles (other than fission fragments), (2) insensitive to ..gamma..-radiation, and (3) has an efficiency for the detection of fission fragments independent of incident neutron energy over a wide range of neutron energies.

The objective of the program reported herein was to provide a Safety Analysis of the 700 h.p. Combustion Test Facility located in Building 93 at the Pittsburgh Energy Technology Center. Extensive safety related measures have been incorporated into the design, construction, and operation of the Combustion Test Facility. These include: nitrogen addition to the coal storage bin, slurry hopper, roller mill and pulverizer baghouse, use of low oxygen content combustion gas for coal conveying, an oxygen analyzer for the combustion gas, insulation on hot surfaces, proper classification of electrical equipment, process monitoring instrumentation and a planned remote television monitoring system. Analysis of the system considering these factors has resulted in the determination of overall probabilities of occurrence of hazards as shown in Table I. Implementation of the recommendations in this report will reduce these probabilities as indicated. The identified hazards include coal dust ignition by hot ductwork and equipment, loss of inerting within the coal conveying system leading to a coal dust fire, and ignition of hydrocarbon vapors or spilled oil, or slurry. The possibility of self-heating of coal was investigated. Implementation of the recommendations in this report will reduce the ignition probability to no more than 1 x 10/sup …

An aerial radiological survey to measure terrestrial gamma radiation was carried out over the United Nuclear Corporation (UNC) Recovery Systems Facility located near Wood River Junction, Rhode Island. At the time of the survey (August 1979) materials were being processed at the facility. Gamma ray data were collected over a 3.28 km/sup 2/ area centered on the facility by flying north-south lines spaced 60 m apart. Processed data indicated that detected radioisotopes and their associated gamma ray exposure rates were consistent with those expected from normal background emitters, except directly over the UNC Facility. Average exposure rates 1 m above the ground, as calculated from the aerial data, are presented in the form of an isopleth map. No ground sample data were taken at the time of the aerial survey.

This report describes models and analyses devised at Los Alamos National Laboratory to determine the technical characteristics of different inertial confinement fusion (ICF) reactor elements required for component integration into a functional unit. We emphasize the generic properties of the different elements rather than specific designs. The topics discussed are general ICF reactor design considerations; reactor cavity phenomena, including the restoration of interpulse ambient conditions; first-wall temperature increases and material losses; reactor neutronics and hydrodynamic blanket response to neutron energy deposition; and analyses of loads and stresses in the reactor vessel walls, including remarks about the generation and propagation of very short wavelength stress waves. A discussion of analytic approaches useful in integrations and optimizations of ICF reactor systems concludes the report.

Design features of Bow-Shaped Toroidal Field Coils are described and compared with circular and D shaped coils. The results indicate that bow coils can produce higher field strengths, store more energy and be made demountable. The design offers the potential for the production of ultrahigh toroidal fields. Included are representative coil shapes and their engineering properties, a suggested structural design and an analysis of a specific case.

The use of Cox's proportional hazards model in analyzing light water reactor failure data is described. A small data base on reactor valve failures illustrates the method.

This formal monthly report covers the studies related to the use of /sup 238/PuO/sub 2/ in radioisotopic power systems carried out for the Space and Terrestrial Systems Division of the US Department of Energy by the Los Alamos National Laboratory. Most of the studies discussed here are of a continuing nature. Results and conclusions described may change as the work continues. Published reference to the results cited in this report should not be made without the explicit permission of the person in charge of the work.

The United States Department of Energy is conducting a program designed to reclaim or stabilize inactive uranium-mill tailings sites. This report presents the status of the Liner Evaluation Program. The purpose of the study was to identify eight prospective lining materials or composites for laboratory testing. The evaluation was performed by 1) reviewing proposed regulatory requirements to define the material performance criteria; 2) reviewing published literature and communicating with industrial and government experts experienced with lining materials and techniques; and 3) characterizing the tailings at three of the sites for calcium concentration, a selection of anions, radionuclides, organic solvents, and acidity levels. The eight materials selected for laboratory testing are: natural soil amended with sodium-saturated montmorillonite (Volclay); locally available clay in conjunction with an asphalt emulsion radon suppression cover; locally available clay in conjunction with a multibarrier radon suppression cover; rubberized asphalt membrane; hydraulic asphalt concrete; chlorosulfonated polyethylene (hypalon) or high-density polyethylene; bentonite, sand and gravel mixture; and catalytic airblown asphalt membrane. The materials will be exposed in test units now being constructed to conditions such as wet/dry cycles, temperature cycles, oxidative environments, ion-exchange elements, etc. The results of the tests will identify the best material for field study. The …

Studies of exclusive final states produced by the two-photon process have been made at SPEAR by the Mark II and by the Crystal Ball Collaborations. Measurements of ..pi../sup +/..pi../sup -/ and ..pi../sup 0/..pi../sup 0/ production in the mass region 500 MeV/c/sup 2/ < m/sub ..pi pi../ < 2000 MeV/c/sup 2/ are presented. These data include strong signals from the well-known f(1270) meson. The A/sub 2/(1310) has been observed via its ..pi../sup 0/ eta decay mode and its partial width to ..gamma gamma.. has been determined. A measurement of the cross section for the reaction ..gamma gamma.. ..-->.. ..pi../sup +/..pi../sup -/..pi../sup +/..pi../sup -/ is reported. This channel is found to be small just above the four pion threshold, but exhibits a large enhancement near the rho/sup 0/rho/sup 0/ threshold.

Measurements of magnetic field distribution as a function of time and radius were made in ZT-40 with its ceramic vacuum vessel. Data were obtained with a 10-station, 20-coil magnetic probe, measuring the B/sub p/ and B/sub epsilon/ orthogonal field components in deuterium plasma discharges. Sheath formation and diffusion, magnetic axis location and motion, the effect of the probe on the plasma, and the consistency of flux measurements with external probes are examined.

A general study of the application of static VAR compensators (SVC's) to high-voltage transmission systems has been performed. Considerable emphasis has been placed on improvements to synchronous stability, and it is shown that SVC's can provide significant benefits in terms of damping for unstable modes of oscillation and increases in transient stability limits. This report includes descriptions of static VAR compensators, technical and economic comparisons of different compensators, compensator models for system studies, comprehensive study procedures, study results for two small-scale systems, and guidelines for SVC application.

This document provides a set of criteria and standards for greater confinement disposal (CCD) of low-level waste as an alternative to shallow land burial or deep geologic disposal for certain types of waste. The criteria and standards are discussed relative to seven major areas: radiation exposure protection, characterization of waste, transportation and handling, site selection, engineering, general facility requirements, and administration. The document addresses the objectives or goals of burial at intermediate depths to provide greater confinement, and its advantages and disadvantages compared to shallow land burial. Additionally, the document describes a generic greater confinement disposal facility (GCDF), and discusses as well as evaluates the various interrelating factors which must be considered in the selection of a viable site and in the development of GCDF design and performance criteria. Methods are developed for evaluating and ranking the importance of the factors based on health and safety, their potential impact on cost, and the uncertainty and/or difficulty in measurement and control of the factors. It also provides the methodology and analysis used to determine the various site-specific waste concentration acceptance standards (in the form of area disposal concentration limits) as well as design and engineering standards. It also illustrates the methodology …

This paper sets forth questions that a congressional office needs to consider in the process of closing down. These include statutory and non-statutory matters such as staff, the franking privilege, retirement benefits for Members and staff, allowances, and the disposition of congressional papers, and other office items.

This report presents a general analysis of personal staff functions in a congressional office. Because there is little specific information from Congress and other sources regarding staff job descriptions and because congressional office organization patterns very significantly, this report focuses on the staff functions that are common to all offices regardless of organizational structure or job title: office management; mail; projects; casework; legislation; schedulng and personal services; press and public relations; and political functions.