This monthly report for /sup 238/Pu Fuel Form Activities has two main sections: SRP-PuFF facility and SRL Fuel Form Activities. The program status, budget information, and milestone schedules are discussed in each main section. The Work Breakdown Structure (WBS) for this program is shown. Only one monthly report per year is processed for EDB.

Data on liquid and steam injections into sodium were recorded during a series of wastage experiments. These data are analyzed for acoustic power and spectral characteristics, expanding the data base up to 10 gm/sec injection rates from the earlier 0.5 gms/sec. No significant difference in acoustic power was measured between low temperature steam and liquid injections for the same mass flowrates. The bandwidth for steam injections is broader than for liquid injections. Reaction product deposition during water injections appears to cause a decrease in signal strength with test duration.

The status of technical activities of the Texasgulf Solar Cogeneration Program at the Comanche Creek Sulfur Mine is described. The program efforts reported focus on preparation of a system specification, selection of a site-specific configuration, conceptual design, and facility performance. Trade-off studies performed to select the site-specific cogeneration facility configuration that would be the basis for the conceptual design efforts are described. Study areas included solar system size, thermal energy storage, and field piping. The conceptual design status is described for the various subsystems of the Comanche Creek cogeneration facility. The subsystems include the collector, receiver, master control, fossil energy, energy storage, superheat boiler, electric power generation, and process heat subsystems. Computer models for insolation and performance are also briefly discussed. Appended is the system specification. (LEW)

An experimental task plan for the BWR/4 core spray task of the Refill-Reflood Test Program is presented. The test program will provide core spray distribution data for a 30 degree sector of the BWR/4 and 5-218 design. This design uses different nozzle types and different sparger elevations than the BWR/6-218 design which was tested previously. Test parameter ranges are specified; individual tests are defined; and measurement and data utilization plans are defined.

Numerical analysis tools are used to characterize the fields reradiated by cultural scatterers like powerlines, pipelines and fences. These fields are then compared to the returns expected from deeply buried targets and suggestions are made for methods to identify and remove cultural noise from survey data.

During the past three months effort has concentrated on formulating a method to predict the enhancement of electrode surface field and power input occasioned by the presence of a projection on the electrode surface, during the ion sheath development period which attends the scavenging a contact gap following current interruption in vacuum. In addition, experimental evidence has been obtained to support the theory, postulated earlier, of a turn-around interval for electrons left in the gap, which preceeds the rise of the transient recovery voltage.

A summary is given of the Fermilab Tevatron project. The project is organized into three phases. The first includes the superconducting magnet ring, minimal refrigeration and rf for slow acceleration of a beam to approximately 1 TeV. The second involves additional refrigeration and rf for fast pulsing up to approximately 2 min/sup -1/. Third phase includes beam extraction and switchyard modifications, experimental areas and beams modifications and additions. (GHT)

Two automated reaction calorimetry systems were built and tested. The first made use of a quartz thermometer probe as the temperature measuring element. The second was constructed using a thermister which was part of a Wheatstone bridge. The off-balance voltage from the bridge was measured using the 6 1/2 digit digital voltmeter, and transferred to the microprocessor. The one disadvantage of the first system is the relatively large size of the quartz sensor. The calorimeter systems were used to measure: the enthalpies of hydrolysis of ketals, acetal, orthoesters, enthalpies of hydration of alkenes; enthalpies of formation of small ring hydrocarbons. (ATT)

Two finite element (FE) approaches were used to calculate opening mode I stress intensity factors (K/sub I/) in two- or three-dimensional (2-D and 3-D) problems for the Heavy-Section Steel Technology (HSST) program. For problems that can be modeled in two dimensions, two techniques were used. One of these may be termed an ''energy release rate'' technique, and the other is based on the classical near-tip displacement and stress field equations. For three-dimensional problems, only the latter technique was used. In the energy release technique, K/sub I/ is calculated as the change in potential energy of the structure due to a small change in crack length. The potential energy is calculated by the FE method but without completely solving the system of linear equations for the displacements. Furthermore, the system of linear equations is only slightly perturbed by the change in crack length and, therefore, many computations need not be repeated for the second structure with the slight change in crack length. Implementation of these last two items has resulted in considerable savings in the calculation of K/sub I/ as compared to two complete FE analyses. These ideas are incorporated in the FMECH code. The accuracy of the methods has been …

The two point correlation function for the quantum nonlinear Schroedinger (delta-function gas) model is studied. An infinite series representation for this function is derived using the quantum inverse scattering formalism. For the case of zero temperature, the infinite coupling (c ..-->.. infinity) result of Jimbo, Miwa, Mori and Sato is extended to give an exact expression for the order 1/c correction to the two point function in terms of a Painleve transcendent of the fifth kind.

A water source heat pump has been designed that is capable of operating over the range from 40 to 110/sup 0/F entering water temperature and has a heating coefficient of performance greater than six in the upper portion of this range. A computerized heat pump balance program was written to allow the performance of either a water-to-water or a water-to-air heat pump to be predicted in either the heating or cooling mode. A detailed program description, flow charts, and sample outputs are appended. The balance program was used to specify components for a high efficiency water-to-water and a high efficiency water-to-air heat pump. Performance predictions for both units in heating and in cooling are included. The water-to-water and water-to-air performance predictions were compared. The water-to-air approach was clearly superior. A detailed design and layout was done for the three solar-assisted water-to-air heat pump. A horizontal configuration was chosen for marketability reasons. The design was made consistent with high quantity production equipment available in our factories and should result in the lowest possible manufacturing cost. A key question to be answered in this project is whether a reciprocating compressor can operate without damage at the high suction pressures characteristic to the …

The operation of an OTEC plant will result in the mixing of large volumes of seawater from different depths within the ocean. Because suspended particulate material is intimately involved in marine food webs and transition metals, such as copper, can have toxic effects, it is important to develop a sound methodology for characterizing and quantifying transition metal behavior associated with the solid material. The characterization of solid-phase-associated transition metals in the marine environment has largely been directed at marine sediments. These studies have generally indicated that it is not possible to uniquely identify the solid phases or chemical speciation of a given metal. There are many reasons for this difficulty, but the probable major analytical problems arise from the fact that many of the transition metals of interest are present only in trace concentrations as adsorbed species on amorphous oxides or as coprecipitates. In one approach transition metals are classified according to how easily they are solubilized when exposed to different types of chemical attack, as defined in chemical extraction schemes. In this study, several of the most widely accepted extraction techniques were compared for many of the most commonly measured transition metals to a variety of marine sediments. Based …

A detailed literature search of the available thermodynamic data of proposed refrigerant/absorbent pairs and measurement of those data that are unmeasured or unreliable are reported. The data to be obtained for the pure fluids included: the critical temperature, pressure and volume; the vapor pressure curve; the latent heat of vaporization at the normal boiling point; the freezing point; the specific heat of the liquid and vapor; and the specific volumes of the saturated liquids and vapors. For the fluid mixtures, the data included the dew point and bubble point at four specified pressures plus the heats of mixing and specific heat at several solution compositions. Pure fluids surveyed included: ammonia, methylamine, ethylamine, chlorodifluoromethane (R-22), fluorodichloromethane (R-21), ethylene glycol, 1,4-Butanediol, diethylene glycol dimethyl ether (DGDE), N,N-dimethylacetamide (DMA), N,N-dimethylhexanamide (DMH), N,N-dimethyldecanamide (DMD). Binary fluid mixtures surveyed included: ammonia/ethylene glycol; ammonia/1,4-butanediol; methylamine/ethylene glycol; methylamine/1,4-butanediol; ethylamine/ethylene glycol; ethylamine/1,4-butanediol; and R-22/ DGDE. (LEW)

Quarterly report of the Argonne National Laboratory Chemical Engineering Division regarding activities related to properties and handling of radioactive materials, operation of nuclear reactors, and other relevant research.

Mechanisms that were developed for the Argonne National Laboratory - Northern Illinois University theorem proving system are discussed. By defining special input clauses and demodulators, it is possible to simulate mathematical processes such as canonicalization of polynomials with no special programming. The mechanisms presented resulted from a study of the X³ = X problem in ring theory. The use of the mechanisms allowed this problem to the solved for the first time by the automated theorem proving system.

The effects of curvature on steady states of chemical catalytic reactions are investigated by studying the cases of the catalytic particle being a spherical or cylindrical shell. Existence and stability of solutions are studied. It is shown that the solutions converge to the solutions for the catalytic slab when the curvature goes to 0 in each case.

This report describes a coupled Eulerian-Lagrangian code, ICECO-CEL, for analyzing the response of the primary system during hypothetical core disruptive accidents. The implicit Eulerian method is used to calculate the fluid motion so that large fluid distortion, two-dimensional sliding interface, flow around corners, flow through coolant passageways, and out-flow boundary conditions can be treated. The explicit Lagrangian formulation is employed to compute the response of the containment vessel and other elastic-plastic solids inside the reactor containment. Large displacements, as well as geometrical and material nonlinearities are considered in the analysis. Marker particles are utilized to define the free surface or the material interface and to visualize the fluid motion. The basic equations and numerical techniques used in the Eulerian hydrodynamics and Lagrangian structural dynamics are described. Treatment of the above-core hydrodynamics, sodium spillage, fluid cavitation, free-surface boundary conditions and heat transfer are also presented. Examples are given to illustrate the capabilities of the computer code. Comparisons of the code predictions with available experimental data are also made.

This report covers the research, development, and management activities of the programs involving high-performance lithium-aluminum/iron sulfide batteries at Argonne National Laboratory (ANL) and at contractors' laboratories during the period October 1979 through September 1980. These batteries, which are being developed for electric-vehicle propulsion and stationary energy storage applications, consist of vertically oriented prismatic cells with one or more inner positive electrodes of FeS or FeS2 facing negative electrodes of lithium-aluminum, and molten LiCl-KCl electrolyte.

Mixing, pressure drop, and flow split experiments were performed on a 217 pin LMFBR fuel bundle with a pitch to diameter ratio of 1.25 and a lead length of 12 inches. It was found that the turbulent flow data could best be characterized by the energy parameter C/sub 1L/=.106, which is 9% higher than the value from the correlation of Chiu et al. Chiu's correlation was developed on a data base of 61 and 91 pins. The spread of existing data about the correlation is +- 25%, but the error band on our data is expected to be less (approx. +- 10% since injection depth effects were not previously considered). This result is consistent with the concept of increased swirl flow in larger bundles (more pins).

Many of the basic elements of passive solar design are reviewed. Passive solar construction is covered according to system type, each system type discussion including a general discussion of the important design and construction issues which apply to the particular system and case studies illustrating designed and built examples of the system type. The three basic types of passive solar systems discussed are direct gain, thermal storage wall, and attached sunspace. Thermal performance and construction information is presented for typical materials used in passive solar collector components, storage components, and control components. Appended are an overview of analysis methods and a technique for estimating performance. (LEW)

Significant items are identified in DOE's technical market penetration analysis of the direct-use program. Federal funding levels for the direct-use program are recommended. (MHR)

Cellular glasses are prime candidate materials for the structural substrate of mirrored glass for solar concentrator reflecting panels. These materials are brittle, however, and susceptible to mechanical failure from slow crack growth caused by a stress corrosion mechanism. The results are detailed of one part of a program established to develop improved cellular glasses and to characterize the behavior of these and commercially available materials. Commercial and developmental cellular glasses were tested and analyzed using standard testing techniques and models developed from linear fracture mechanics. Two models describing the fracture behavior of these materials are developed. Slow crack growth behavior in cellular glass was found to be more complex than that encountered in dense glasses or ceramics. The crack velocity was found to be strongly dependent upon water vapor transport to the tip of the moving crack. The existence of a static fatigue limit was not conclusively established, however, it is speculated that slow crack growth behavior in Region I may be slower, by orders of magnitude, than that found in dense glasses.

This report summarizes results from the successful experimental operation of the Tandem Mirror Experiment (TMX) over the period October 1978 through September 1980. The experimental program, summarized by the DOE milestones given in Table 1-1, had three basic phases: (1) an 8-month checkout period, October 1978 through May 1979; (2) a 6-month initial period of operation, June through November 1979, during which the basic principles of the tandem configuration were demonstrated (i.e., plasma confinement was improved over that of a single-cell mirror); and (3) a 10-month period, December 1979 through September 1980, during which the initial TMX results were corroborated by additional diagnostic measurements and many detailed physics investigations were carried out. This report summarizes the early results, presents results of recent data analysis, and outlines areas of ongoing research and data analysis which will be reported in future journal publications.

In this teaching manual several activities are presented to introduce students to information on solar energy through classroom instruction. Wind power is also included. Instructions for constructing demonstration models for passive solar systems, photovoltaic cells, solar collectors and water heaters, and a bicycle wheel wind turbine are provided. (BCS)