This was the fifth of a continuing series of summer studies held at LBL to discuss high energy heavy ion collisions. Recently, a similar meeting has been held on alternate years at GSI (Darmstadt); and, in 1979, we held a meeting at LBL exclusively devoted to ultra-relativistic nuclear collisions. Two new features distinguish this study from earlier meetings in the series. First, the energy range for discussion was broadened by including collisions from about 20 MeV/nucleon to the highest available in the cosmic radiation. The lower range, particularly below 100 MeV/nucleon, will be under intense study in the near future with machines such as the upgraded Bevalac, Michigan State University Superconducting Cyclotron, GANIL in France, and the SC at CERN. Recently, the high energy collision regime has been expanded by the successful operation of the CERN ISR with alpha particles. Second, in addition to an extensive program of invited talks, we decided for the first time to actively solicit contributions. Forty-seven individual items from the conference were prepared separately for the data base. (GHT)

A programmable, multiple-function timing module has been developed for use in transuranic (TRU) waste analysis applications at the Idaho National Engineering Laboratory. The Programmable Multi-Timer (PRMT) is an expanded version of a module originally built for accelerator-based active photon interrogation experiments. During the course of the experiments, it became obvious that a more versatile timer was needed to meet several unforeseen requirements. The PRMT was designed to meet the new requirements and to serve as a general-purpose timing module for other applications.

A new experimental frontier has recently been opened to the study of two photon processes. The first results of many aspects of these reactions are being presented at this conference. In contrast, the theoretical development of research ito two photon processes has a much longer history. This talk reviews the many different theoretical ideas which provide a detailed framework for our understanding of two photon processes.

The progress in development of special Microchannel Plates for particle tracking is reported. The requirements of (1) high spatial resolution; (2) high density of information; and (3) rate capability were found to be satisfied in a thick Microchannel Plate with a CsI coating operating in a focusing magnetic field. The measurements of the Microchannel Plate detection efficiency, gain and noise are presented for several detectors. The pictures of the passage and interaction of the high energy charged particles inside the detector are shown.

The purpose of the Workshop on High-Resolution, Large-Acceptance Spectrometers was to provide a means for exchange of information among those actively engaged in the design and construction of these new spectrometers. Thirty-seven papers were prepared for the data base.

The March 1979 accident at General Public Utilities Nuclear Corporation (GPUNC) Three Mile Island Nuclear Power Station Unit 2 (TMI-2), resulted in the transfer of more than 1100 m/sup 3/ of contaminated water to the auxiliary and fuel handling building. The principal sources of the water were the makeup and letdown purification system and the containment building sump. The contaminated water was processed through an ion exchange system designated as EPICOR II. The EPICOR-II System is a three-stage process. The contaminated water passes through a first stage of ion exchange media, designated as prefilters, and then through the second and third stages, designated as demineralizers. The majority of the activity was deposited in the first-stage prefilters, which have a maximum administrative loading limit of 1300 curies. The predominant radionuclides present in the prefilters are cesium and strontium.

Cost and production data from five commercial-scale geothermal direct-heat application projects are reviewed. Unit costs of geothermal energy under a variety of assumptions about production levels, costs, tax treatment, financial structure, and cost of capital are calculated and compared to prices of conventional fuels which would be displaced over the life of a geothermal project. Geothermal energy is found to be less costly than distillate fuel oil for all cases examined and cheaper than natural gas in many cases.

Eighteen papers are included, one of which was previously abstracted for EDB. A separate abstract was prepared for each of the remaining seventeen papers for Energy Research Abstracts (ERA); ten of the papers are included in Energy Abstracts for Policy Analysis (EPA).

The information in each Quarterly is presented in the same sequence as in the Field Work Package Proposal and Authorization System (WPAS) submissions prepared for the U.S. Department of Energy; the main sections are Applied Plasma Physics, Confinement Systems, Development and Technology, and Mirror Fusion Test Facility (Planning and Projects). On occasion, we shall include information pertaining to the LLNL role as Lead Laboratory for the Open Systems Mirror Fusion Program. Each of these sections is introduced by an overall statement of the goals and purposes of the groups reporting in it. As appropriate within each section, statements of the goals of individual programs and projects are followed by articles containing summaries of significant recent activity and descriptive text.

There has been a recent upsurge of activity in the field of induction linacs, with several new machines becoming operational and others in the design stages. The performance levels of electron machines have reached 10's of kiloamps of current and will soon reach 10's of MeV's of energy. Acceleration of ion current has been demonstrated, and the study of a 10 GeV heavy ion induction linac for ICF continues. The operating principles of induction linacs are reviewed with the emphasis on design choices which are important for increasing the maximum beam currents.

This paper covers Maxwell's approach to developing energy storage capacitors. Based on previous capacitor designs of 3 KJ, 5 KJ and 10 KJ, the final Nova 12.5 KJ capacitor evolved. At the outset of the Nova capacitor development program, a relatively new dielectric system, polypropylene-paper-DOP, seemed to show superiority in volumetric efficiency, life, and more importantly cost. However, as a result of studies performed at Maxwell, a high-density, energy-storage capacitor was developed utilizing new high-quality, high-density paper and caster oil as the dielectric. Test data have demonstrated that the Maxwell 12.5 KJ capacitor exceeds all LLNL's qualification requirements.

The FED bulk shield provides protection from high-energy neutrons and gamma rays and removes nuclear heat generated. Bulk shield optimization calculations were conducted using the Los Alamos ONEDANT discrete ordinates and the General Atomic PATH point kernel codes. Six candidate steel alloys were considered.

Many of the vacuum problems faced by EBT will soon be shared by other plasma devices as high-power microwave systems and long pulse lengths become more common. The solutions used on EBT (such as the raised lip with elastomer seal) are not unique; however, experience has shown that microwave-compatible designs must be carefully thought out. All details of the vacuum must be carefully thought out. All details of the vacuum must be carefully screened in advance to insure that microwaves do not leak into pumps or diagnostics where they can cause major damage. Sputter coating, which even now is noticeably present in most pulsed plasma systems, becomes much worse as systems approach steady state. And finally, radiation degradation of components which is presently a minor problem will become significant on high-power microwave-fed devices, such as EBT-P.

Ion-beam depth-profiling was carried out on three different glasses leached (or hydrated) in deionized water using /sup 1/H(/sup 19/F,..cap alpha gamma..)/sup 16/O nuclear reaction, secondary ion mass spectrometry (SIMS) and sputter-induced photon spectrometry (SIPS) techniques. The depth-profiles show an interdiffusion mechanism in which the sodium ions in the glass are depleted and replaced by hydrogen (H/sup +/) or hydronium (H/sub 3/O/sup +/) ions from the solution. The leaching behavior does not show significant difference whether the glass surface is fractured or polished. Problems of mobile ion migration caused by ion bombardment and loss of hydrogen during analysis are discussed.

Particle size is a primary determinant of resources available to consumers and of the efficiency of energy transfer through planktonic food chains. Dual radioisotopic labeling (with /sup 14/C-bicarbonate and /sup 3/H-acetate) and size fractionation of naturally-occurring phytoplankton-bacterioplankton assemblages were employed to examine the particle size distributions of planktonic autotrophy and microheterotrophy in four limnologically-dissimilar US reservoirs (Lake Mead, Arizona-Nevada, oligo-mesotrophic; Broken Bow Lake, Oklahoma, mesotrophic; Lake Texoma, Oklahoma-Texas, eutrophic; and Normandy Lake, Tennessee, eutrophic). Small nano- and ultraphytoplankton (< 8.0 ..mu..m) and free-living bacteria (< 3.0 ..mu..m) were primarly responsible for planktonic autotrophy and microheterotrophy, respecitvely, even in eutrophic conditions. Zooplankton grazing experiments indicated that (1) most grazing pressure occurs on 3.0 to 8.0 ..mu..m particles, (2) grazer limitation of the occurrence of attached bacteria amd microbial-detrital aggregates is unlikely, and (3) free-living bacteria are inefficiently harvested, relative to algae, by most reservoir zooplankton. Relative to autorophy, the microheterotrophic conversion of allochthonous dissolved organic matter and algal excretion products to bacterial biomass appears unlikely to be a significant source of organic carbon for planktonic grazers in most reservoirs.

Separate abstracts were prepared for 17 papers in this conference proceedings. (LEW)

Results are described of engineering tests of operation of two gyrotrons from one power supply, tests of waveguide components and antennae, antenna design, and the x-ray shielding concept. Finally, we describe considerations of interaction with other system components.

The proceedings includes talks given at the symposium and the banquet. They include examples of technology at the laboratory and speculation on the future at the laboratory. (GHT)

New long-wavelength-emitting, high-speed, liquid scintillators have been developed and tailored specifically for plasma diagnostic experiments employing fiber optics. These scintillators offer significant advantages over commercially available plastic scintillators in terms of sensitivity and bandwidth. FWHM response times as fast as 350 ps have been measured. Emission spectra, time response data, and relative sensitivity information are presented.

There has been recently a revival of interest in supersymmetric gauge theories, stimulated by the hope that supersymmetry might help in clarifying some of the questions which remain unanswered in the so called Grand Unified Theories and in particular the gauge hierarchy problem. In a Grand Unified Theory one has two widely different mass scales: the unification mass M approx. = 10/sup 15/GeV at which the unification group (e.g. SU(5)) breaks down to SU(3) x SU(2) x U(1) and the mass ..mu.. approx. = 100 GeV at which SU(2) x U(1) is broken down to the U(1) of electromagnetism. There is at present no theoretical understanding of the extreme smallness of the ratio ..mu../M of these two numbers. This is the gauge hierarchy problem. This lecture attempts to review the various mechanisms for spontaneous supersymmetry breaking in gauge theories. Most of the discussions are concerned with the tree approximation, but what is presently known about radiative correction is also reviewed.

A precision bipolar voltage-to-frequency converter, which is computer-programmable from a digital interface, has been produced. Utilizing NIM packaging, the 1 MHz V/f has sixteen ranges and may be operated from panel controls as well as remotely programmed. Intended for use in magnetic measurements, good performance and versatility suggest wider application. The instrument is described and the circuit design is discussed in detail. Tests of the first unit are discussed and instrument specifications are given.

Previous studies have indicated that addition of nitrogen to Fe-inefficient PI54619-5-1 soybeans, when grown in calcareous Hacienda loam soil, intensified iron chlorosis. It was reasoned that when large amounts of nitrate were taken up, more hydroxyl ions were expelled by roots with resultant less availability of soil Fe. It was further reasoned that if N were fixed symbiotically, cation (K, Ca, Mg) uptake would considerably exceed anion (H/sub 2/PO/sup -//sub 4/, Cl/sup -/) uptake with no need for uptake of NO/sub 3//sup -/ with resultant increase in protons excreted. Iron availability then would be increased and there would be less Fe deficiency. An experiment was conducted with and without innoculation with the PI54619-5-1 soybeans in the calcareous soil to test the ability of nodules to prevent Fe chlorosis. The only plants in the experiment with nodules were those with innoculum added and these plants were most free of Fe chlorosis. Iron analyses indicated that the hypothesis may be correct. It can be concluded that cation-anion uptake balance has much to do with the onset of lime-induced chlorosis. The relative uptake of NH/sub 4//sup +/ and NO/sub 3//sup -/ species of nitrogen can be important considerations in the cation-anion balance.

The work described here was completed more than three years ago, and represents, in large part the PhD and MS thesis research of two of the present authors. Much of it has been reported previously elsewhere. It constitutes an effort to develop and study a moderately low cost, moderate resolution, high sensitivity, on-line method for digital neutron radiography, intended for use where neutron fluence was limited by source strength, or received dose. The basic imaging system consisted of a position-sensitive gas proportional chamber together with its associated imaging electronics, and a plane neutron converter. Enriched-boron, gadolinium, and polyethylene (for fast neutrons) converters were analyzed and tested. Some work was done on digital data enhancement, and efforts to improve spatial resolution included pressurizing the proportional-chamber gas to reduce the track lengths of the neutron-interaction products.

Power conditioning systems for high peak and average power, high repetition rate discharge excited lasers involve operation of modulator components in unconventional regimes. Reliable operation of switches and energy storage elements under high voltage and high di/dt conditions is a pacing item for laser development at the present time. To test and evaluate these components a Modulator Component Test Facility (MCTF) was constructed. The MCTF consists of a command charge system, energy storage capacitors, thyratron switch with inverse thyratron protection, and a resistive load. The modulator has initially been operated at voltages up to 60 kV at 600 Hz. Voltage, current, and calorimetric diagnostics are provided for major modulator components. Measurements of thyratron characteristics under high di/dt operation are presented. Commutation energy loss and di/dt have been measured as functions of the tube hydrogen pressure.