The demonstration of ICF scientific feasibility requires success in target design, driver development and target fabrication. Since these are interrelated, we present here some results of ion beam target studies and relate them to parameters of interest to ion accelerators. Ion deposition physics have long been a well known subject apart from high beam currents. Recent NRL experiments at up to 250 kA/cm/sup 2/ ions confirm the classical deposition physics now at current densities which are comparable to most ion targets. On the other hand, GSI data at low current density but 1 to 10 MeV/nucleon are continually being accumulated. They have yet to find anomalous results. Relying on target concepts outlined briefly, we report on the energy gain of ion-driven fusion targets as a function of input energy, ion ranges and focal spot radius. We also comment on some consequences of target gain versus driver and reactor requirements.

Ten papers were presented at the meeting. A separate abstract was prepared for each paper. (LCL)

The MFTF SNBPSS comprises a number of sources of potentially hazardous electrical energy in a small physical area. Power is handled at 80 kV dc, 80 A; 70 V dc, 4000 A; 25 V dc, 5500 A; 3 kV dc, 10 A; and 2 kV dc, 10 A. Power for these systems is furnished from two separate 480 V distribution systems and a 13.8 kV distribution system. A defense in depth approach is used; interlocks are provided in the hardware to make it difficult to gain access to an energized circuit, and the operating procedure includes precautions which would protect personnel even if no interlocks were working. The complexity of the system implies a complex operating procedure, and this potential complexity is controlled by presenting the procedure in a modular form using 37 separate checklists for specific operations. The checklists are presented in flowchart form, so contingencies can be handled at the lowest possible level without compromising safety.

The Ca II absorption lines observed in the late time optical spectra of Type I supernovae are analyzed in the context of the /sup 56/Ni model. The analysis indicates that a metal rich atmosphere of mass approx. 0.2 M/sub solar mass/ surrounds the /sup 56/Ni core. This result is consistent with properties of the atmosphere derived from spectra near maximum light.

It has often been reported that, in mass regions corresponding to peaks in the neutron strength function, nonstatistical mechanisms contribute a significant or even major portion of the average radiation width in the beginning of the resonance region. This could severely limit the possibility of calculating caputure cross sections for targets where experimental data are lacking, because such direct effects are sensitive to the detailed nuclear level structure in the daughter nucleus. The reaction /sup 98/Mo+n was examined for neutrons in the 1 keV to 3 MeV energy range, because this case is often cited as one of the clearest examples of valence neutron capture effects. Preliminary calculations are presented which suggest that these nonstatistical effects rapidly disappear when measurements from even a small number of resonances are averaged.

We have established a comprehensive program for the US Department of Energy to develop electrofibrous prefilters to extend the life of High Efficiency Particulate Air (HEPA) filters that are used in the nuclear industry. We have selected the electrofibrous filter because, compared to the mechanical fibrous filter, it has a higher efficiency and longer lifetime. Two different electrofibrous filters have been developed for use in nuclear ventilation systems. One prototype is a stationary prefilter while the other is a rolling prefilter. Both prefilters use the same basic filtering technique in which a fibrous filter medium is sandwiched between a high voltage electrode and a ground electrode, both electrodes having a sufficient open area to offer minimum air resistance. The applied voltage on the electrodes generates an electric field that polarizes the filter fibers, which then attract suspended particles via electrostatic forces. The filter media and electrodes have been pleated to provide a sufficiently long particle residence time. The special requirement of protecting the HEPA filter from a high concentration of smoke aerosols during fire conditions led to the development of the rolling, electrofibrous prefilter. We established the feasibility of this concept in a series of tests using commercially available rolling …

The parameterization of the magnitude and the energy dependence of the E1 gamma-ray strength function for the calculation of neutron- and proton-induced capture cross sections and capture gamma-ray spectra is investigated. The energy-dependent Breit-Wigner (EDBW) is reparameterized incorporating a more general expression for the Breit-Wigner line shape. Evaluation of the reparameterized E1 gamma-ray strength function is discussed. (WHK)

Development of indirectly heated cathodes and duoplasmatron type electron feed assemblies is being pursued for use on positive ion sources of neutral beam systems. The cathodes utilize La/sub 2/O/sub 3/ doped molybdenum emission surfaces which supply ionizing electrons for a large rectangular (28 cm. x 60 cm.) magnetic multi-cusp confinement chamber. Single and double electron feed assemblies with different electrode geometries were tested at discharge currents of greater than or equal to 1000 A and pulse lengths of approx. 35 sec. Details of construction and performance results such as plasma uniformity are discussed.

The reconfiguration of MFTF to a tandem mirror machine with thermal barriers has caused a significant expansion in the physical scope of plasma diagnostics. From a mechanical perspective, it complicates the plasma access, system interfaces, growth and environmental considerations. Conceptual designs characterize the general scope of the design and fabrication which remains to be done.