Compilation of abstracts for lectures that were presented at the NATO Advanced Study Institute on "Nonequilibrium Superconductivity, Phonons and Kapitza Boundaries." The topics primarily discuss work in the area of superconductivity, low-temperature phenomena, and energy-related problems in this field.

The accuracy of two integration algorithms is studied for the common engineering condition of a von Mises, isotropic hardening model under plane stress. Errors in stress predictions for given total strain increments are expressed with contour plots of two parameters: an angle in the pi plane and the difference between the exact and computed yield-surface radii.

Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes efforts directed toward understanding and improving components of molten carbonate fuel cells and have included operation of a 10-cm square cell.

Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes efforts directed toward understanding and improving components of molten carbonate fuel cells and have included operation of 10-cm square cells.

Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes efforts directed toward understanding and improving components of the molten carbonate fuel cells operated at temperatures near 925 K.

Quarterly report discussing fuel cell research and development work at Argonne National Laboratory (ANL). This report describes efforts directed toward understanding and improving components of molten carbonate fuel cells and have included operation of 10-cm square cells.

This report contains an elastic stress and displacement analysis of a prismatic cell can subjected to internal pressure. A computer program was written to perform the analysis. The results show that, for the geometry chosen, the thicknesses of the cell-can walls and the magnitude of the internal pressure are the most important parameters that determine the stresses and deformations of the cell can. Recommendations for future studies are included.

Nuclear materials inventory-verification techniques for large split-table fast critical assemblies are being studied in this program. Emphasis has been given to techniques that minimize fuel handling in order to reduce facility downtime and radiation exposure to the inventory team. The techniques studied include drawer seals, autoradiography, and spectral index measurements. Two-drawer sealing techniques have been studied, and the relative strengths and weaknesses are pointed out. The rod-type locking mechanism would not disrupt the reactor cooling air flow or interfere with autoradiography but is more expensive to implement. Passive autoradiography was used in a ZPPR inventory to verify to a 93% confidence level that less than 8-kg plutonium was missing. The inventory was completed in four days by a five-member team with radiation exposures well within acceptable limits. Two autoradiographic film packages were developed to distinguish HEU from a DU matrix. The 30-mil pack requires an exposure between 4 and 16 hours and fits into most of the drawers. The 40-mil pack requires only a two-hour exposure but fits into less than half the drawers.

This report reviews the research activities of the Applied Mathematical Sciences Section for the period October 1, 1978, through March 31, 1980. The body of the report discusses various projects carried out in four major areas of research: applied analysis, computational mathematics, software engineering, and software clinics. Information on section staff, visitors, workshops, and seminars is found in the appendices.

This report describes the R&D work done at Argonne National Laboratory on solar energy technologies during the period October 1, 1978, to September 30, 1979. Technical areas included in the ANL solar program are solar energy collection, heating and cooling, thermal energy storage, ocean thermal energy conversion, photovoltaics, biomass conversion, satellite power systems, and solar liquid-metal MHD power systems.

This report describes the R&D work done at Argonne National Laboratory on solar energy technologies during the period October 1, 1978, to September 30, 1979. Technical areas included in the ANL solar program are solar energy collection, heating and cooling, thermal energy storage, ocean thermal energy conversion, photovoltaics, biomass conversion, satellite power systems, and solar liquid-metal MHD power systems.

A technique for incorporating automatic transformations into processes such as the application of inference rules, subsumption, and demodulation provides a mechanism for improving search strategies for theorem proving problems arising from the field of program verification. The incorporation of automatic transformations into the inference process can alter the search space for a given problem, and is particularly useful for problems having broad rather than deep proofs. The technique can also be used to permit the generation of inferences that might otherwise be blocked and to build some commutativity or associativity into the unification process. Appropriate choice of transformations, and new literal clashing and unification algorithms for applying them, showed significant improvement on several real problems according to several distinct criteria.

Biaxial creep-fatigue data for Incoloy 800 and Type 316H stainless steel at elevated temperatures are presented. Tubular specimens were subjected to constant internal pressure and strain-controlled axial cycling with and without hold times in tension as well as in compression.

The branching fraction in the decay of the fission product ⁸⁵m-krypton⁸⁵m to the ground state ⁸⁵krypton (10.75 y) was measured relative to the total decay to both ⁸⁵krypton and ⁸⁵Rb. Samples of uranium-235 were highly irradiated in a high-flux reactor and dissolved. ⁸⁵Rb was measured by isotope-dilution mass spectrometry, and the ⁸⁵krypton was counted in GM tubes the counting efficiencies of which were calibrated with a standardized ⁸⁵krypton gas of known disintegration rate. The branching fraction measured with both a low-burnup sample and a high-burnup sample was 0.2160 +/- 0.0019, the largest error arising from the uncertainty in the caibration of the standardized gas.

Report of activities of Argonne Chemical Engineering Division, including advanced battery project, electro-chemical project management, advanced fuel cell development, utilization of coal, magnetohydrodynamics heat and seed recovery technology, solar energy, fast reactor chemistry research, nuclear fuel cycle studies, magnetic fusion energy research, and basic energy science.

COMMIX-SA-1 is a three-dimensional, transient, single-phase, compressible-flow, component computer program for thermohydrodynamic analysis. It was developed for solar applications in general, and for analysis of thermocline storage tanks in particular. The conservation equations (in cylindrical coordinates) for mass, momentum, and energy are solved as an initial-boundary-value problem. The detailed numerical-solution procedure based on a modified ICE (Implicit Continuous-Fluid Eulerian) technique is described. A method for treating the singularity problem arising at the origin of a cylindrical-coordinate system is presented. In addition, the thermal interactions between fluid and structures (tank walls, baffles, etc.) are explicitly accounted for. Finally, the COMMIX-SA-1 code structure is delineated, and an input description and sample problems are presented.

Large-scale efforts are in progress to develop advanced batteries for utility energy storage systems. Realization of the full benefits available from those systems requires development, not only of the batteries themselves, but also the ac/dc power converter, the bulk power interconnecting equipment, and the peripheral electric balance of plant equipment that integrate the battery/converter into a properly controlled and protected energy system. This study addresses these overall system aspects; although tailored to a 20-MW, 100-MWh lithium/sulfide battery system, the technology and concepts are applicable to any battery energy storage system.

In 1978, a conceptual design of a 100 MW-h load-leveling battery system having Li alloy/FeS cells was developed as a result of a joint effort between ANL and Rockwell International. Most of this cost was contributed by the submodule structure and the charge equalization scheme, which was the same as that developed for electric-vehicle batteries.

A state-of-the-art review is presented on the corrosion and mechanical behavior of materials at elevated temperatures in coal-gasification environments. The gas atmosphere in coal-conversion processes are, in general, complex mixtures which contain sulfur-bearing components (hydrogen sulfide, SO2, and COS) as well as oxidants (carbon dioxide/carbon monoxide and water/hydrogen). The information developed over the last five years clearly shows sulfidation to be the major mode of material degradation in these environments. The corrosion behavior of structural materials in complex gas environments is examined to evaluate the interrelationships between gas chemistry, alloy chemistry, temperature, and pressure. Thermodynamic aspects of high-temperature corrosion processes that pertain to coal conversion are discussed, and kinetic data are used to compare the behavior of different commercial materials of interest. The influence of complex gas environments on the mechanical properties such as tensile, stress-rupture, and impact on selected alloys is presented. The data have been analyzed, wherever possible, to examine the role of environment on the property variation. The results from ongoing programs on char effects on corrosion and on alloy protection via coatings, cladding, and weld overlay are presented. Areas of additional research with particular emphasis on the development of a better understanding of corrosion processes in …

The corrosion behavior of aluminum, copper, and iron in inhibited ethylene glycol-ASTM corrosive water solutions was evaluated in a laboratory loop under isothermal and heat-flux conditions for 1000 h at temperatures between 378 and 413 degrees K, in static autoclave tests at 450 degrees K for 500 h, and by potentiodynamic polarization measurements at temperatures between 298 and 348 degrees K. The effect of time, temperature, and ethylene glycol concentration of the heat-transfer fluid on the extent of inhibitor depletion was determined from analyses of the reserve alkalinity, pH, and inhibitor content of the solutions. The performance of an electrochemical sensor as a monitor of fluid quality was also evaluated. A heat flux of 0.4 to 1.0 kW/m sq. did not have a significant effect on the corrosion behavior of the various materials at temperatures between 378 and 413 degrees K. The corrosion rates of aluminum, copper, and iron in the 50 volume percent inhibited ethylene glycol-corrosive water solution decreased as a function of time during the 1000-h test. At 413 degrees K, the corrosion rate of copper was considerably higher than that of iron or aluminum at low flow velocity. Significant degradation of the fluid quality, as indicated by …

A complete set of optical oscillator strengths and electron-impact cross sections for the argon atom is presented in tabular form. A large variety of experimental data and theoretical calculations was studied, and various checks based on theory (including the constraint of sum rules) were critically performed. Data were analyzed mainly by a semi-empirical method that stresses the close relation of photoabsorption with electron-atom collisions.

The successful operation and economic viability of deuterium-tritium- (D-T-) fueled tokamak-type commercial power fusion reactors will depend to a large extent on the development of reliable tritium-containment and fuel-recycle systems. Of the many operating steps in the fuel recycle scheme, separation or enrichment of the isotropic species of hydrogen by cryogenic distillation is one of the most important. A parametric investigation was carried out to study the effects of the various operating conditions and the composition of the spent fuel on the degree of separation. A computer program was developed for the design and analysis of a system of interconnected distillation columns for isotopic separation such that the requirements of near-term D-T-fueled reactors are met. The analytical results show that a distillation cascade consisting of four columns is capable of reprocessing spent fuel varying over a wide range of compositions to yield reinjection-grade fuel with essentially unlimited D/T ratio.

The fraction of delayed neutrons beta in slow-neutron beams from a uranium-238 pulsed spallation neutron source is 0.0053 for 300 MeV protons. This measurement appears to be the first one of this quantity. The result indicates that, for most classes of measurements, the delayed-neutron background in time-of-flight instruments will be unimportant, and places constraints on the physics description of spallation targets. The measurement was performed at the prototype pulsed spallation neutron source, ZING-P', at Argonne National laboratory.

The second addition is a substantial revision of the original work. A new chapter on latent heat storage, an appendix on units and conversions, and an index have been added. The purpose for this manual is to provide information on the design and installation of thermal energy storage in solar heating systems. It is intended for contractors, installers, solar system designers, engineers, architects, and manufacturers who intend to enter the solar energy business. The reader should have general knowledge of how solar heating systems operate and knowledge of construction methods and building codes. Knowledge of solar analysis methods such as f-chart, SOLCOST, DOE-1, or TRNSYS would be helpful. The information contained in the manual includes sizing storage, choosing a location for the storage device, and insulation requirements. Both air-based and liquid-based systems are covered with topics on designing rock beds, tank types, pump and fan selection, installation, costs, and operation and maintenance. Topics relevant to latent heat storage include properties of phase-change materials, sizing the storage unit, insulating the storage unit, available systems, and cost. Topics relevant to heating domestic water include safety, single- and dual-tank systems, domestic water heating with air- and liquid-based space heating systems, and stand alone …