At the request of the Department of Energy, field techniques were developed to evaluate and improve the injection of brine into wells at Strategic Petroleum Reserve (SPR) sites. These wells are necessary for the disposal of saturated brine removed from salt domes where oil is being stored. The wells, which were accepting brine at 50 percent or less of their initial design rates, were impaired by saturated brine containing particulates that deposited on the sand face and in the geologic formation next to the wellbore. Corrosion of the brine-disposal pipelines and injection wells contributed to the impairment by adding significant amounts of particulates in the form of corrosion products. When tests were implemented at the SPR sites, it was found that the poor quality of injected brines was the primary cause of impaired injection; that granular-media filtration, when used with chemical pretreatment, is an effective method for removing particulates from hypersaline brine; that satisfactory injection-well performance can be attained with prefiltered brines; and that corrosion rates can be substantially reduced by oxygen-scavenging.

Photograph used for a story in the Daily Oklahoman newspaper. Caption: "Joy Avery-DeWelt, Oklahoma State University Technical Institute official, offers sign language interpretation to Richard Hamilton, a deaf student."

Photograph used for a story in the Oklahoma Times newspaper. Caption: "Bruce Coleman holds one of his clocks that will on display during a holiday craft show and sale Saturday at the Cleveland County Fair Building, 601 Robinson."

B-roll video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

B-roll video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

B-roll video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

B-roll video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Sections of the 40-kV, 40-A, TMX source are shown. This module is comprised of the arc chamber and accelerator sections. The source accelerator section uses a single rectangular insulator to perform three functions: providing voltage standoff, forming the supporting structure, and acting as the vacuum wall. Both machinable glass ceramic (Corning Macor/sup TM/) and F.R.P. (Nema G-10) have been used for this insulater. In either case, the insulator is joined to the titanium base plate and extractor electrode by thermal-setting-epoxy adhesive. The parts are self jigging; the bonding is done at 120 to 130 /sup 0/C under a load of .34 MPa (50 psi).

A comprehensive set of kerma factors for neutrons and photons has been computed for the International Commission on Radiological Protection's (ICRP) standard man, ICRP soft tissue, ICRP red bone marrow, ICRP eye lens, H/sub 2/O, dry air, Al, Si, /sup 32/S, Ar, and four thermoluminescent dosimeter materials. The energy range for neutrons is 10/sup -9/ to 20 MeV, divided into 175 energy groups. For photons, the energy range is 10/sup -3/ to 20 MeV, and kerma factors are calculated at 144 energy values. The kerma factors were computed using the neutron group-averaged and photon pointwise Evaluated Nuclear Data Library. Results are compared with those in other works where appropriate. The use of kerma factors to convert fluence to absorbed-dose index for ICRP tissue is discussed.

Photograph used for a story in the Oklahoma Times newspaper. Caption: "Unidentified students play near portable steel classroom which is raising some ire in Edgemere Historic Preservation District.."

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

B-roll video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

B-roll video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

There are nine different systems requiring over fifty computers in the Local Control and Instrumentation System for the Mirror Fusion Test Facility. Each computer system consists of an LSI-11/2 processor with 32,000 words of memory, a serial driver that implements the CAMAC serial highway protocol. With this large number of systems it is important that as much software as possible be common to all systems. A serial communications system has been developed for data transfers between the LSI-11/2's and the supervisory computers. This system is based on the RS 232 C interface with modem control lines. Six modem control lines are used for hardware handshaking, which allows totally independent full duplex communications to occur. Odd parity on each byte and a 16-bit checksum are used to detect errors in transmission.

A design for water-cooled extractor grids for long-pulse and continuously operated ion sources for neutral-beam injectors is described. The most serious design problem encountered is that of minimizing the thermal deformation (bowing) of these slender grid rails, which have typical overall spans of 150 mm and diameters on the order of 1 mm. A unique U-tube design is proposed that offers the possibility of keeping the thermal bowing down to about 0.05 mm (about 2.0 mils). However, the design requires high-velocity cooling water at a Reynolds number of about 3 x 10/sup 4/ and an inlet pressure on the order of 4.67 x 10/sup 6/ Pa (677 psia) in order to keep the axial and circumferential temperature differences small enough to achieve the desired small thermal bowing. It appears possible to fabricate and assemble these U-tube grids out of molybdenum with high precision and with a reasonably small number of brazes.