12 Matching Results

Results open in a new window/tab.

CARBON AND DEUTERIUM NUCLEAR MAGNETIC RESONANCE IN SOLIDS (open access)

CARBON AND DEUTERIUM NUCLEAR MAGNETIC RESONANCE IN SOLIDS

In Chapter I we present the results on a study of cross polarization dynamics, between protons and carbon-13 in adamantane, by the direct observation of the dilute, carbon-13, spins. These dynamics are an important consideration in the efficiency of proton enhancement double-resonance techniques and they also provide good experimental models for statistical theories of cross relaxation. In order to test these theories we present a comparison of the experimental and theoretical proton dipolar fluctuation correlation time {tau}{sub c}, which is experimentally 110 {+-} 15 {micro}sec and theoretically 122 {micro}sec for adamantane. These double resonance considerations provide the background for extensions to deuterium and double quantum effects discussed in Chapter II. In Chapter II an approach to high resolution nmr of deuterium in solids is described. The m = 1 {yields} -1 transition is excited by a double quantum process and the decay of coherence Q({tau}) is monitored. Fourier transformation yields a deuterium spectrum devoid of quadrupole splittings and broadening. If the deuterium nuclei are dilute and the protons are spin decoupled, the double-quantum spectrum is a high resolution one and yields information on the deuterium chemical shifts {Delta}{omega}. The relationship Q({tau}) {approx} cos 2{Delta}{omega}{tau} is checked and the technique is …
Date: July 1, 1976
Creator: Shattuck, Thomas Wayne
System: The UNT Digital Library
Studies of design parameters in the fabrication of Nb--Al--Ge superconductors by the powder metallurgy infiltration method (open access)

Studies of design parameters in the fabrication of Nb--Al--Ge superconductors by the powder metallurgy infiltration method

Experimental studies have been carried out in which the A15 phase of the Nb-Al-Ge system has been synthesized in the form of thin filaments contained in form rolled wires. A powder metallurgy approach has been used to achieve controlled porosity in compacts of sintered niobium powder. Infiltration with an aluminum-germanium eutectic alloy followed by mechanical deformation has produced small interconnected filaments embedded in the Nb matrix. Diffusion heat treatment for a short time transforms them into the A15 superconducting compound with a size range of 1-5 microns at 1300/sup 0/C and 1-9 microns at 1750/sup 0/C. The superconducting properties T/sub c/ and J/sub c/ were evaluated for samples subjected to different condition of time and temperature. The influence of certain parameters involved in the process has been investigated. The microstructure and microhardness of the Al-Ge eutectic alloy cooled at high and low cooling rates from temperatures between 900-400/sup 0/C have been evaluated. Optical and electron beam metallographic results are presented for the analysis of the different phases and relative compositions. The critical temperature measured inductively is between 16.4/sup 0/K and 18.1/sup 0/K depending on the heat treatment. The critical current density as a function of the applied magnetic field is …
Date: December 1, 1976
Creator: Granda, Jose J.
System: The UNT Digital Library
Separated-pair independent particle model and the generalized Brillouin theorem: ab initio calculations on the dissociation of polyatomic molecules (open access)

Separated-pair independent particle model and the generalized Brillouin theorem: ab initio calculations on the dissociation of polyatomic molecules

A method is developed to optimize the separated-pair independent particle (SPIP) wave function; it is a special case of the separated-pair theory obtained by using two-term natural expansions of the geminals. The orbitals are optimized by a theory based on the generalized Brillouin theorem and iterative configuration interaction (CI) calculations in the space of the SPIP function and its single excitations. The geminal expansion coefficients are optimized by serial 2 x 2 CI calculations. Formulas are derived for the matrix elements. An algorithm to implement the method is presented, and the work needed to evaluate the molecular integrals is discussed. (auth)
Date: January 1, 1976
Creator: Sundberg, K. R.
System: The UNT Digital Library
Interrelationships between thermal history and mechanical properties of a secondary hardening steel. [Vasco MA steel] (open access)

Interrelationships between thermal history and mechanical properties of a secondary hardening steel. [Vasco MA steel]

Commercial secondary hardening steel, VASCO MA, has been subjected to modified heat treatments to introduce mixed microstructures of martensite and lower bainite. Dilatometry, tensile testing, hardness measurements and slow-bend testing have been carried out and the mechanical properties obtained have been correlated to microstructure using scanning electron microscopy and metallography. Duplex microstructures containing small amounts of lower bainite are found to show an increased toughness (at similar strength levels) on tempering in the secondary hardening range, as compared to initially fully martensitic microstructures. As the percentage of lower bainite in the duplex microstructures is increased, the secondary hardening peak is found to attenuate. The effect of different austenitization treatments on the secondary hardening behavior, has also been studied. Thermal cycling (for grain refinement) at lower austenitization temperatures is found to reprecipitate out carbon, which has been taken into solution in earlier high temperature austenitization, thereby leading to a significant depletion in the strength of this secondary hardening steel. Alloy carbides, in the secondary hardening stage, have also been analyzed using energy dispersive analysis of x-rays.
Date: December 1, 1976
Creator: Kar, N. J.
System: The UNT Digital Library
Self-diffusion of Co$sup 60$ in crystals of Co$nu$sub 1-x/O (open access)

Self-diffusion of Co$sup 60$ in crystals of Co$nu$sub 1-x/O

Tracer self-diffusion coefficients were measured as functions of temperature and deviations from stoichiometry. The arc-transfer technique of crystal growth was found to produce crystal of Co/sub 1-x/O of essentially the same purity as the starting Co rod, and the quality was comparable to commercially available crystals grown by Verneuil process. Measurements at x = 0.005 in Co/sub 1-x/O showed the Co tracer self-diffusion coefficient to be D = 3.88 x 10$sup -4$ exp (--31600 +- 2400/RT) cm$sup 2$/s between 1037 and 1350$sup 0$C. This activation energy is in agreement with measurements made in air, if proper compensation is made for the effect of variation in stoichiometry. Measurements on crystals having deviations between 0.002 and 0.008 at 1150$sup 0$C showed the diffusion coefficient to depend on p/sub O$sub 2$/ as D = 9.74 x 10$sup -9$ p/sub O$sub 2$//sup 1/(3.59)/ cm$sup 2$/s, where p/sub O$sub 2$/ varied between 10$sup -2$.$sup 5$ and 10$sup -0$.$sup 25$ atm. Comparison with thermogravimetric and electrical conductivity measurements confirms that the defects responsible for Co diffusion in the range of temperature and p/sub O$sub 2$/ of this investigation are singly ionized cobalt vacancies. The Co tracer self-diffusion coefficients in single crystals are nearly identical to those …
Date: January 1, 1976
Creator: Rahman, S. F.
System: The UNT Digital Library
Electromagnetic form factors of hadrons (open access)

Electromagnetic form factors of hadrons

A vector meson dominance model of the electromagnetic form factors of hadrons is developed which is based on the use of unstable particle propagators. Least-square fits are made to the proton, neutron, pion and kaon form factor data in both the space and time-like regions. A good fit to the low-energy nucleon form factor data is obtained using only rho, $omega$, and phi dominance, and leads to a determination of the vector meson resonance parameters in good agreement with experiment. The nucleon-vector meson coupling constants obey simple sum rules indicating that there exists no hard core contribution to the form factors within theoretical uncertainties. The prediction for the electromagnetic radii of the proton is in reasonable agreement with recent experiments. The pion and kaon charge form factors as deduced from the nucleon form factors assuming vector meson universality are compared to the data. The pion form factor agrees with the data in both the space and time-like regions. The pion charge radius is in agreement with the recent Dubna result, but the isovector P-wave pion-pion phase shift calculated from the theory disagrees with experiment. A possible contribution to the form factors from a heavy rho meson is also evaluated. (auth)
Date: January 1, 1976
Creator: Zidell, V. S.
System: The UNT Digital Library
Use of variational techniques for the estimation of neutron detection efficiency (open access)

Use of variational techniques for the estimation of neutron detection efficiency

The neutron detection efficiency is a parameter required in the measurement of reactivity by the modified source technique. The direct solution of the detection efficiency at a perturbed state is costly. To solve for this, a particular variational functional, the Lewins' type variational functional, is presented. The functional is a ratio of two other functionals, each dealing with a reaction rate. The evaluation of this particular functional was done by treating the numerator and the denominator functionals separately. This leads to three flux equations, one for forward flux, and two for adjoint fluxes. The advantages of this formulation over, and the equivalence of this formulation to, the conventional functional presented in the literature are described in detail. The flexibility of the proposed functional is demonstrated by using it to estimate the detection efficiency with four different methods: variational interpolation, conventional variational, variational extrapolation, and multi- reference-state variational. Results are presented for one-dimensional and two- dimensional problems. All results are compared with direct calculations. In all cases, the results show that the variational interpolational method and the multi- reference-state variational method are efficient and practically acceptable.
Date: February 1, 1976
Creator: Lin, S.; Robinson, J.C. & Flanagan, G.F.
System: The UNT Digital Library
Iterative solution of the diffusion and P$sub 1$ finite element equations (open access)

Iterative solution of the diffusion and P$sub 1$ finite element equations

A method for obtaining solutions to the time-independent Boltzmann neutron transport equation on triangular grids with nonorthogonal boundaries and anisotropic scattering is developed. A functional is obtained from the canonical form of the multigroup transport equation. The angular variable is then removed by expanding the functional in spherical harmonics, retaining only the first two moments and limiting the anisotropic scattering to be linear. The finite element method is then implemented by using quadratic Lagrange-type interpolating polynomials to span the spatial domain. The resultant set of coupled linear equations is then solved iteratively. The applicability of convergence acceleration techniques developed for the finite difference method is tested and implemented where appropriate. Finally, a number of numerical experiments are performed to evaluate the performance of the proposed method. The results are compared to results obtained by various established methods. In all cases, agreement is excellent. 16 figures, 7 tables. (auth)
Date: February 1, 1976
Creator: Tomlinson, E.T.; Robinson, J.C. & Vondy, D.R.
System: The UNT Digital Library
High temperature vaporization and thermodynamic study of the scandium-- sulfur system (open access)

High temperature vaporization and thermodynamic study of the scandium-- sulfur system

Results of studies on the stoichiometry, structure, vaporization behavior, and thermodynamic properties of the Sc--S system are reported. The thermodynamic results for the stability of ScS(s) are compared with reported results for other transition-metal and rare-earth monosulfides. Various models are discussed in regard to their ability to describe the bonding in these refractory solids. (JRD)
Date: January 1, 1976
Creator: Tuenge, R. T.
System: The UNT Digital Library
Proton--proton interactions at 200 and 300 GeV/c (open access)

Proton--proton interactions at 200 and 300 GeV/c

The reactions pp $Yields$ pp $pi$$sup +$pi$sup -$ and pp $Yields$ pp$pi$$sup +$$pi$$sup -$$pi$$sup +$$pi$$sup -$ at 200 and 300 GeV/c were investigated using the Fermilab 30-inch hydrogen bubble chamber and downstream wide-gap spark chambers. This analysis is based upon approximately 9500 4- pronged and 6-pronged events. The cross sections were consistent with pomeron dominance for these reactions. The final state pp $pi$$sup +$$pi$$sup -$ is dominated by single diffractive dissociation, whose features are quite similar to those observed at low energy. A strong signal for double excitation was seen in the pp $pi$$sup +$$pi$$sup -$$pi$$sup +$$pi$$sup -$ final state and pomeron factorization was found to be satisfied. In the pp $pi$$sup +$$pi$$sup -$ final state, 66 events passed the criterion of double pomeron exchange defined by D. M. Chew. However, these events were found to be severely contaminated by diffractive events. The two-particle exclusive azimuthal correlations agreed well with the prediction of a photostatistical model. (auth)
Date: January 1, 1976
Creator: Ogino, F.
System: The UNT Digital Library
Gamma-ray decay schemes for $sup 93$Kr, $sup 93$Rb, and $sup 93$Sr (open access)

Gamma-ray decay schemes for $sup 93$Kr, $sup 93$Rb, and $sup 93$Sr

A study of the gamma-ray de-excitation following the beta decays of $sup 93$Kr, $sup 93$Rb, and $sup 93$Sr using the TRISTAN on-line separator facility is reported. Gamma-ray singles and gamma-gamma coincidence measurements were made using Ge(Li) detectors. Of the 162 gamma rays observed in the decay of $sup 93$Sr, 143, representing more than 99 percent of the total gamma-ray intensity observed, were placed in a level scheme containing 36 levels. For the decay of $sup 93$Rb, 243 gamma rays were observed, of which 231 are placed in a level scheme consisting of 74 levels. This again represents a placement of over 99 percent of the total gamma-ray intensity measured. In the case of the $sup 93$Kr decay approximately 98.5 percent of the observed gamma-ray intensity has been accounted for by the proposed level scheme. This results from the placement of 203 of the 217 gamma rays assigned to this decay in a level scheme comprising 56 levels. Beta-branching for these decays were determined from transition intensity balances. Spin and parity assignments were proposed, whenever possible, on the basis of gamma-ray transition probabilities and deduced log ft values. A comparison is made with the available reaction data for the $sup 93$Y …
Date: January 1, 1976
Creator: Bischof, C.J.
System: The UNT Digital Library
A study of the interaction of x-rays and acoustic, stress and shock waves in solids (open access)

A study of the interaction of x-rays and acoustic, stress and shock waves in solids

The primary emphasis of this thesis involves an investigation of techniques for the control and modulation of x-ray radiation through acoustic perturbation of solids. The use of x-ray diffraction and x-ray optical techniques for the study of acoustic fields and atomic motion was also investigated. Analysis of the basic properties of x-ray propagation in solids reveals that practical methods for x-ray control or modulation must involve changes in the spatial configuration of x-ray scatterers. Numerical methods for the study of x-ray propagation in acoustically perturbated crystals are formulated. In developing these methods special emphasis has been placed on Borrmann transmission in thick crystals. Modulation and shuttering (on a micro-second timescale) of x-rays are experimentally demonstrated. A quantitative investigation of the basic interactions used to produce modulation and shuttering is presented. Agreement between the experimental observations and the theoretical predictions is within experimental error. An analytical investigation of the basic potential and limitations of x-ray modulation shuttering and control devices is presented. Basic design criteria for x-ray modulation devices is formulated and applied to practical configurations.
Date: November 1, 1976
Creator: Hauer, A.
System: The UNT Digital Library