From abstract: "This report describes work done on ARF Project C 216 from January 5, 1962 to September 15, 1962. The objectives of the program include evolution of an analytical research program to evaluate effects of environment contributed contamination on precise devices"

From abstract: "This report describes and evaluates the variables affecting contamination of precise devices...In the present report these variables are discussed in more detail and the basis for their inclusion in the listing are given. The relative importance of the several parameters will be discussed in another report."

Abstract: "The purpose of this investigation is to determine the extent to which zirconium exhibits delayed failure (static fatigue) as caused by a combination of absorbed hydrogen and applied stress. Both notched and unnotched specimens of unalloyed zirconium and Zircaloy-2 are being initially hydrogenated to 200 ppm by means of a modified Sieverts apparatus, and delayed failure studies are proceeding at room-temperature. Thus far only preliminary data on unnotched, unalloyed zirconium are available; at the 200 ppm hydrogen level, this material appears to be relatively insensitive to delayed failure at room-temperature."

Abstract: "The purpose of this investigation is to determine the extent to which zirconium and zirconium alloys exhibit delayed failure (static fatigue) as caused by a combination of absorbed hydrogen and applied stress. Both notched and unnotched specimens of unalloyed zirconium and Zircaloy-2 have been hydrogenated to 200 ppm by means of a modified Sieverts apparatus; specimens were evaluated at room temperature. Thus far, no time-dependent fracture has been observed which can be attributed to the delayed failure phenomenon; it appears that these materials are relatively insensitive to static fatigue. The effects of grain size, temperature, cold deformation, and superheated water and steam corrosion on susceptibility to delayed failure are being determined."

The following report is the third Quarterly Report in a series whose investigative purpose is to determine the extent to which zirconium and zirconium alloys exhibit delayed failure as caused by a combination of absorbed hydrogen and applied stress.

The following report summarizes an investigation made to determine the extent to which zirconium and zirconium alloys exhibit delayed failure as caused by a combination of absorbed hydrogen and applied stress during the period September 15, 1961, to September 14, 1962.

The following report focuses on the study of electrostatic classification of submicron aerosols, with emphasis on particles below 0.1 micron. During the period this work was concerned with detailed studies of the ARF charger, the Whitby ionizer used as a charger or neutralizer, and the high-volume classifier.

Introduction: "This study is concerned with the classification of submicron aerosols by electrostatic means. The controlled charging of the particles without undue aerosol losses is of principal interest. We are investigating means of eliminating the interference due to the deposition of small and large particles in the same area. The sampler is to be developed to classify atmospheric dust particles at a rate approaching 1 cfm. During the period covered by this report, work was concerned with the charger and with bringing the high-volume classifier into routing operation. Further tests were made on the classification of atmospheric dust."

Introduction: "This project is a study of eletrostatic classification of submicron aerosols with emphasis on particles below 0.1[mu]. Previous work has shown that classification of particles between 0.1 to 1.0[mu] is feasible by this process. Further improvements along this line include the elimination of interference from initial aerosol charge and increase in sampling rate. The effect of heavy deposits on collection have to be established. More information is desired on the charging regime below 0.1[mu]. Also the overlap of the smallest particles with the larger ones has to be eliminated. It is also of interest to study the possibility of measuring the current due to the precipitating particles. This would make it possible to automate the device. During this period project work was initiated again. There was some delay in finalizing the contract and the laboratory work was not started until early in March."

Introduction: "This project is a study of electrostatic classification of submicron aerosols, with emphasis on particles smaller than 0.1 micron. The overlap of the smallest particles with the larger ones is of principal concern. Also, a faster sampling rate is desired, i.e., heavier deposits in a shorter time are necessary. During the period covered by this report, work was concerned with studies of charging by corona and diffusion, neutralization of initial charge, and classification of various types if aerosols."

Introduction: "One of the major objectives of this study is to develop a routine charger that has no aerosol losses. Also, the interference due to deposition of small and large particles in the same area must be overcome. During this period efforts were concentrated on the former problem, which is the key to practical application of this device."

Annual technical report describing the progress and development of improved zirconium alloys for service in superheated water and steam. This report covers the period between February 1, 1961 to February 28, 1962 and was conducted by the United States and the European Atomic Energy Community (EURATOM).

The following report is part of a series of quarterly reports discussing investigations on the development of zirconium-base alloys having corrosion resistance and strength superior to Zircaloy-2 and/or development of materials of equivalent corrosion resistance by exhibiting enhanced strength. This report covers the period between May 29 and June 18 of 1958, made by the United States and the European Atomic Energy Community (EURATOM).

The following report is one of a series of quarterly reports following the progress and development of improved zirconium alloys for service in superheated water and steam. This report covers the period between January 1 to March 31, 1962 and was conducted by the United States and the European Atomic Energy Community (EURATOM). The major effort in this period has been devoted to ascertaining and evaluating corrosion behavior of 75 ternary compositions.

Quarterly report describing the progress and development of improved zirconium alloys for service in superheated water and steam. This report covers the period between July 1 to September 30, 1962 and was conducted by the United States and the European Atomic Energy Community (EURATOM).

Quarterly report describing the progress and development of improved zirconium alloys for service in superheated water and steam. This report covers the period between October 1 to December 31, 1961 and was conducted by the United States and the European Atomic Energy Community (EURATOM).

The following report is the first semi-annual report of a literature survey designed to investigate the uses and technology of radioisotopes in the countries of the world from 1955 to the present. This survey includes two phases: 1) involves the direct comparison of radioisotopic work in all fields in various countries as demonstrated at international conferences. 2) involves a more detailed examination and evaluation of the individual fields of interest selected previously (Phase II is also expected to comprise the bulk of the remainder of this investigation).

Abstract: "This quarterly report, ARF 1194-10, covers the work performed in the time period December 15, 1961 to March 14, 1962, on Contract No. AT(11-1)-578. In this period, Phase II, the detailed evaluation of various fields of radioisotope research, has been extended. Preliminary results on the use of radioisotopes in the industrial applications, apparatus and techniques, and metallurgy categories are presented. These preliminary studies indicate the quantity of research, growth rates, and specialized areas of interest in various countries of the world. More detailed evaluations of these categories will be presented in the final report."

The following quarterly report covers the period from May 16 to August 15, 1962. This report summarizes the progress being made on the study of the saturation and recovery of the hole which can be burned into the magnetic resonance band associated with the F-center in KCl.

The following quarterly progress report covers the period of August 15 to November 15, 1962. It summarizes three activities of the group. The first part is the optical study of the absorption band associated with the F-center in RbCl. The second part discusses some elementary calculations of the spin-lattice relaxation times, the primary purpose of this step is to indicate the nature of the theoretical problem faced and show the large gap between the value calculated theoretically and measured experimentally. The last section includes more data on the shape and recovery of the hole in a EPR band associated with the F-center in KCl.

From abstract: "This document constitutes ARF Report No. 1207-6, and is a quarterly report on research on the preparation of high specific activity radioisotopes".

Report discussing a study of various neutron image detector systems and their characteristics, and opal glass diffusers in an optical image synthesis apparatus. A five inch diameter neutron beam exposure facility is also discussed.

Report discussing a studies regarding "imaging qualities and the thermal neutron and gamma-ray sensitivities of several neutron imaging detectors".

A report about obtaining low energy neutron capture gamma-ray spectra of a suitable quality for inclusion in the Atlas. It analyzes several low energy spectra obtained from many sources.