Abstract: Because of the outstanding heat transfer efficiency of sodium, it is necessary in sodium-cooled reactors to consider and attempt to prevent the occurrence of adverse stresses as a result of thermal transients in the system.

Abstract; The fission product data obtained during SM-1 Core I operation (June 1957 - May 1960) is reviewed briefly and interpreted. Evidence is presented to indicate that a fuel element defect was responsible for the high fission product activity level observed in the primary coolant. Relative escape coefficients are calculated and the defect size estimated. Anticipated fission product levels during SM-1 Core II and SM-1A Core I operation are estimated from alpha surface contamination data on completed fuel elements. The importance of in-line sampling for monitoring fission product activity is stressed as well as the need for failed fuel element detection methods.

Abstract: "The objectives of this program are the development of zirconium-base alloys possessing exceptionally good corrosion resistance to 680 F water or 750-900 F system and/or improved strength at elevated temperatures. Approximately 100 binary compositions were prepared and screened by corrosion testing in 680 F water; selected compositions were exposed to 750 F steam. The data obtained indicate promising bases for ternary and quaternary alloys. Related investigations involving zirconium purity and heat treatment for improvement of corrosion properties are proceeding. Hydrogen pickup and mechanical properties will be used as acceptability tests on promising compositions."

Abstract: A 3000 kw (thermal) bayonet duplex tube model steam generator was performance-tested in a liquid metal test loop at MSA Research Corporation, Callery, Pennsylvania, under the cognizance of Atomics International.

"Mesic decay of hyperfragments is discussed systematically on the basis of a previous model for hyperfragments. The general formalism for the two-body and three-body mesic decay was developed. The polarization-direction correlation and the angular correlation for the two-body and the three-body decays are discussed together with the decay probability. The formalism was developed so as to include the isotopic spin selection rule ( DELTA I = 1/2 and 3/2) for the mesic decays. The theory was applied especially for the low mass number hypergragments where it was found that the branching ratios of the two-body and the three-body mesic decays of /sup 3/H/sub i and /sup 4/H/sub i, (/sup 3/ H/sub i yields /sup 3/He + i/sup -/)/(/sup 3/H/sub i yields D + p+ pi /sup -/) and (/sup 4/H/sub i yields /sup 4/He + pi /sup -/)/(/sup 4/H/ sub i yields /sup 3/H + p + pi /sup -/), could be used for the determination of the spins of both hyperfragments. The fraction of the p-wave decay rate for the free LAMBDA decay obtained from the reaction /sup 5/He/sub i yields /sup 4/He + p + pi where the decay proceeds through two-resonant states (p/sub 3/2/ and p/sub 1/2/) …

Report discussing discrete energy levels observed within certain crystals which are due to perturbations of energy levels of the free ion by an electrostatic field arising from the crystal lattice. The analytic procedures for determining the field from the charge configuration are given, and the resulting fields are classified according to their symmetry. After a general survey of group-theoretical ideas, the applicable groups are analyzed in detail, and characters appropriate for both integral and half-integral angular momenta of the free ion are tabulated. Text includes tabulations, equations, and matrices using Wigner and Racah coefficients.

Tables of the electron pressure and kinetic energy for a partially degenerate, relativistic, ideal electron gas are computed by numerical integration using an IBM 7090 electronic calculator. These are given in terms of log10(B) and log10(0), where B is the ratio of the temperature to the rest mass of the electron and (O) is proportional to the numerical density of electrons. The tables include values of T from 5 million to 400 billion degrees and cover the range of electron densities from the region of a perfect gas to the region of complete degeneracy.

Report documenting the progress of the Army Gas-Cooled Reactor Systems Program to develop a mobile nuclear power plant for military field operation.

A relationship is derived the mean square fluctuating current of a hot wire anemometer and the sic turbulent Reynolds stresses in the stream-coordinate system without employing the usual low turbulent intensity approximation. The relatively simple result is a consequence of assuming proportionality between the wire current reading and the perpendicular velocity component instead of the non-linear dependence required by King's law. The assumption is valid for instruments equipped with the proper linearizing circuitry. The stream-coordinate Reynolds' stresses are then related to the cylindrical polar Reynolds stresses.

This report considers the HFIR reflector design criteria and presents a summary of the reflector design. The reflector type chosen as complying best with the established criteria consists of a 3 in. thick removable beryllium annulus utilizing four concentric cylinders with cooling water flowing through the annuli between cylinders, and an outer 9 in. thick permanent beryllium annulus with axial circular coolant holes. Reflector support structures and experimental facilities are described and probable beryllium replacement costs are indicated.

To date, three types of metal-to-metal seal disconnects have been subjected to thermal cycling and make-break tests. In addition, a commercial disconnect has been procured for testing.

"An investigation was made into the various processes for the fixation of mixed fission products as solids in order to determine the extent they could be utilized as heat sources for thermoelectric generators. Generators of up to ten watts can be designed and built with state-of-art'' thermoelectric materials and mixed fission products soon to be available from the ldaho Falls calcination pilot plant. Mixed fission products from other processes and plants to be on stream'' in this decade will be capable of fueling practical generators into the kilowatt range using thermoelectric materials available in the same time period. A survey was made on current research and development efforts on waste fixation processes. Studies showed that a wide range of power densities (from 0.002 to 0.2 watts per cubic centimeter) will be available from calcined fission product wasted. An experimental program for the consolidation of low density, Idaho Chemical Processing Plant alumina type wastes is reviewed. Preliminary results indicated that densification factors of three to four are readily obtainable for such wastes."

Abstract: The means to prevent the recurrence of tetralin leakage into the SRE sodium systems are discussed. Included is a description of the redesign of system components to utilize alternate coolants such as nitrogen, air, and NaK.

Introduction: This is a final report on the evaluation of Kanigen electroless nickel plating for surfaces in contact with water and steam i a sodium heated AISI Type 316 stainless steel steam generator. The purpose of the coasting was to afford protection from stress corrosion cracking originating on the water-steam side of the unit. It has been concluded that the kanigen coating does not afford adequate protection for the services condition intended. This work was performed as part of the research and development program for the United States Atomic Energy Commission sodium Components Design Project.

This document reports progress during the month of February, 1961, recording investigations and studies of a flow rate using a curved pipe or S-tube and documenting measurements of mass flow, tube design and construction.

"This is the third quarterly report on Task II dealing with Methods Development for Radio-Tracing of Coal Product Hydrocarbons With Tritium. The problem of accurate low-level tritium assay for tagged hydrocarbons has been resolved and attention is now primarily directed at the questions of tritium mobility and radio-chemical purity in tagged tracers."

Equilibrium krypton and xenon adsorption isotherms were obtained for four varieties of charcoal and for Linde Molecular Sieves Types 4A and 5A, generally at 0, 25, and 60°c. Such data are of interest in connection with design and evaluation of adsorbers for radioactive noble gas fission products. The isotherms were fitted, by linear regression analysis, to straight-line forms of the Freundlich and Langmuir equations. The Freundlich linear equation gave the better fit and the parameters of this equation are presented for each of the isotherms. Also presented are the constants for an equation representing the temperature dependence of arbitrary adsorption coefficients, the coefficients having been calculated from the Freundlich isotherm parameters. Some aspects of the applicability and accuracy of these results are discussed.

Report of the near ultraviolet and visible emission spectrum of CH presented in the form of a spectrophotometric atlas. The spectrum was recorded photoelectrically from an acetylene-oxygen flame in the region 4900 to 3000 A by use of a high-resolution grating monochromator. Each of the lines in the CH spectrum is identified.

The general solution to the basic differential equation d^4w/dy^4 +4w= -4f(y) is transformed from the primary form treated in most texts to an alternate form in which each integration constant corresponds to one edge condition at y=0. The relationships between the integration constants of the two forms are derived and the values for the transformed functions are tabulated. The particular solution is derived in general and given in unique form for various functional forms of f(y). Matrix notation is used throughout the derivations; however, a knowledge of matrix theory is not need for application of the results.

Oscillations have been observed in a magnetically supported cylindrical rod of plasma. This rod of plasma can be the discharge occurring in the defining aperture of a Mode II, pressure gradient arc. Similar oscillations can also occur in the column of a Mode I arc. These oscillations appear to be the mechanism that drives the Mode II blowup phenomena.

The General Electric Company is proceeding with an irradiation program to proof test a representative array of Savannah I fuel rods. Irradiation of a test assembly containing Savannah I fuel rods has begun and it is proposed that the results of this irradiation will permit an advance evaluation of the fuel performance and fuel burnup in the Savannah I reactor. This report covers the first two quarters of the reporting period. All aspects of the subject program have been consolidated and applicable portions are discussed in some detail.

Preliminary results from experiments on the dissolution of beryllium metal and sintered UO2-BeO fuel pellets are reported. In all cases the pellets were fired in hydrogen at 1650-1800°C. Uranium, from UO2-BeO pellets containing more than 60% UO2, is readily leached with boiling 6-13 M HNO3 in about 6 hr. The BeO in these pellets dissolves only slowly in nitric acid; however, in 8 M HNO3-0.2M NaF, it dissolves at about the same rate as the UO2. Sintered pellets containing less than 10% UO2 do not dissolve rapidly in common aqueous reagents. The highest rates are obtained in boiling acidic fluoride solutions; e.g., sintered BeO and BeO-8% UO2 are dissolved initially at a rate of about 1.7 mg min-1cm-2 (13 mils/hr) in boiling 5.8 M NH4HF2.

The IBM-70% code GHT has been programmed for the 7090computer, to be run under control of the IBM-7090 FORTAN Monitor System. By eliminating the use of tapes for intermediate number storage, it has been possible to reduce computing time by a factor of 26 over the 704. A minimum of three tapes are required; one for input, one for output, and the System tape. One scratch tape is required for transient problems, and one punch tape is required if the steady-state temperature distribution is to be punched on cards.

A program translates an algebraic language like Algol into the machine language of an electronic computer must perform the following functions.