This manual represents the recommendations of the Instrumentation and Controls Division committee on Electrical and Electronic Symbols and Drawing that have been issued to date. Section I consists of copies of the American Standards Association Graphical Symbols for Electrical Diagrams, with certain variations or additions that have been recommended by the Committee to clarify or more positively identify the device or element symbolized. Since publication of the present ASA standards, certain elements, such as the transistor, have come into common use. Committee and represent the symbols have been selected after considerable study by the Committee and represent the symbols that seem to be standard Reference Information series, Interim E--1.

The development of nuclear reactors and other sources of nuclear particles has provided the analyst with a new method which has been successfully applied to the determination of microgram and even submicrogram quantities of many elements. In this method, known as "radioactivation analysis," the element to be determined is "activated" through some type of nuclear reaction which produces a radioactive isotope of the element. Since the radioisotope produced decays with its own characteristic radiation and half-life, it is possible, through radiochemical measurements following radioactivation, to devise a method of analysis which is very specific for particular elements. Whenever necessary, the radioisotope is separated by chemical means and its radioactivity is then measured by some type of radiation counter.

Test work was completed on development of a stripping method for the amine extraction (Amex) process which produces a concentrated uranyl nitrate solution for shipment to the refinery. This procedure offers potential cost savings by simplifying the overall mill-refinery flowsheet. The process involves treatment of the amine extract with calcium nitrate solution to convert the uranium in the solvent to a nitrate complex, stripping the uranium with water or dilute nitric acid, and recovery of nitrate from the solvent for recycle by contact with a lime slurry.

The performances of aqueous-homogeneous (AHBR), molten-salt (MSBR), liquid-bismuth (LBBR), gas cooled graphite-moderated (GGBR), and deuterium-moderated gas-cooled (DGBR) breeder reactors were evaluated in respect to fuel yield, fuel cycle costs, and development status. A net electrical plant capability of 1000 Mwe was selected, and the fuel and fertile streams were processed continuously on-site.

The performances of aqueous-homogeneous (AHBR), molten-salt (MSBR), liquid-bismuth (LBBR), gas-cooled graphite-moderated (GCBR), and deuterium-moderated gas-cooled (DGBR) breeder reactors were evaluated in respect to fuel yield, fuel cycle costs, and development status. A net electrical plant capability of 1000 Mwe was selected, and the fuel and fertile streams were processed continuously on-site.

This report describes the preprocessing stage to be added to the present ORACLE-Algol translator which will enable it to translate programs containing procedures. The Algol 60 procedure is an extremely flexible tool, and its full implementation presents a number of difficulties. Since it is undesirable to undertake major revisions of the existing parts of the translator and impossible to solve all of these difficulties in a processing stage, it was necessary to impose certain restrictions on the use of procedures. The result, however, retains the more basic features of the Algol 60 procedure concept. Most of the algorithms published in the Communications of the Association for Computing Machinery can be handled by the preprocessor with few minor or no changes.

Sanderson & Porter have carried out a series of studies over the last four years which indicate that the pebble-bed reactor way be an attractive way to obtain low-cost power. At the request of the Atomic Energy Commission, two design studies have been carried out on this concept at the Oak Ridge National Laboratory. The first of these a preliminary design of a 10-Mw(t) reactor experiment, the PRRE, was initiated September 10, and a report on the study was issued November 1960. The second phase of the work, a conceptual design study of a 330-Mw (e) central station, was initiated November 1, and is the subject of this report.

The objectives of this study have been to examine the problems of the pebble-bed reactor concept and to conceive a design of a facility for investigating the feasibility of this type of reactor. The design must provide for adequate leaktightness of the contaminated-gas system and adequate maintenance of contaminated components, the most vital feasibility questions of the concept.

Studies are being made on the recovery of thorium (and uranium) from granitic rock, since this source represents a very large potential thorium reserve for the nuclear power industry. In preliminary leaching studies on 16 granite samples (containing 8-95 ppm thorium and 1.5-16 ppm uranium), maximum recoveries of thorium and uranium ranged 30-85% and 15-65% respectively, and sulfuric acid consumption was high (30-120 lbs H2SO4 per ton of granite). A relatively high acidity was needed to obtain rapid and efficient dissolution of the soluble thorium fraction. The cost of treating granite was estimated at $3.50-5.20 per ton, variations within this range being dependent primarily on differences in acid consumption for different granites. Estimated costs per pound of thorium plus uranium recovered ranged $30-500.

A relationship is derived the mean square fluctuating current of a hot wire anemometer and the sic turbulent Reynolds stresses in the stream-coordinate system without employing the usual low turbulent intensity approximation. The relatively simple result is a consequence of assuming proportionality between the wire current reading and the perpendicular velocity component instead of the non-linear dependence required by King's law. The assumption is valid for instruments equipped with the proper linearizing circuitry. The stream-coordinate Reynolds' stresses are then related to the cylindrical polar Reynolds stresses.

This report considers the HFIR reflector design criteria and presents a summary of the reflector design. The reflector type chosen as complying best with the established criteria consists of a 3 in. thick removable beryllium annulus utilizing four concentric cylinders with cooling water flowing through the annuli between cylinders, and an outer 9 in. thick permanent beryllium annulus with axial circular coolant holes. Reflector support structures and experimental facilities are described and probable beryllium replacement costs are indicated.

To date, three types of metal-to-metal seal disconnects have been subjected to thermal cycling and make-break tests. In addition, a commercial disconnect has been procured for testing.

Equilibrium krypton and xenon adsorption isotherms were obtained for four varieties of charcoal and for Linde Molecular Sieves Types 4A and 5A, generally at 0, 25, and 60°c. Such data are of interest in connection with design and evaluation of adsorbers for radioactive noble gas fission products. The isotherms were fitted, by linear regression analysis, to straight-line forms of the Freundlich and Langmuir equations. The Freundlich linear equation gave the better fit and the parameters of this equation are presented for each of the isotherms. Also presented are the constants for an equation representing the temperature dependence of arbitrary adsorption coefficients, the coefficients having been calculated from the Freundlich isotherm parameters. Some aspects of the applicability and accuracy of these results are discussed.

The general solution to the basic differential equation d^4w/dy^4 +4w= -4f(y) is transformed from the primary form treated in most texts to an alternate form in which each integration constant corresponds to one edge condition at y=0. The relationships between the integration constants of the two forms are derived and the values for the transformed functions are tabulated. The particular solution is derived in general and given in unique form for various functional forms of f(y). Matrix notation is used throughout the derivations; however, a knowledge of matrix theory is not need for application of the results.

Oscillations have been observed in a magnetically supported cylindrical rod of plasma. This rod of plasma can be the discharge occurring in the defining aperture of a Mode II, pressure gradient arc. Similar oscillations can also occur in the column of a Mode I arc. These oscillations appear to be the mechanism that drives the Mode II blowup phenomena.

Preliminary results from experiments on the dissolution of beryllium metal and sintered UO2-BeO fuel pellets are reported. In all cases the pellets were fired in hydrogen at 1650-1800°C. Uranium, from UO2-BeO pellets containing more than 60% UO2, is readily leached with boiling 6-13 M HNO3 in about 6 hr. The BeO in these pellets dissolves only slowly in nitric acid; however, in 8 M HNO3-0.2M NaF, it dissolves at about the same rate as the UO2. Sintered pellets containing less than 10% UO2 do not dissolve rapidly in common aqueous reagents. The highest rates are obtained in boiling acidic fluoride solutions; e.g., sintered BeO and BeO-8% UO2 are dissolved initially at a rate of about 1.7 mg min-1cm-2 (13 mils/hr) in boiling 5.8 M NH4HF2.

The IBM-70% code GHT has been programmed for the 7090computer, to be run under control of the IBM-7090 FORTAN Monitor System. By eliminating the use of tapes for intermediate number storage, it has been possible to reduce computing time by a factor of 26 over the 704. A minimum of three tapes are required; one for input, one for output, and the System tape. One scratch tape is required for transient problems, and one punch tape is required if the steady-state temperature distribution is to be punched on cards.

A program translates an algebraic language like Algol into the machine language of an electronic computer must perform the following functions.

The experimental demonstration of fission product release from over heated reactor fuel is necessarily subject in many respects to the arbitrary conditions imposed by the experimenter. Since an almost infinite latitude exists in the choice of materials, atmospheres, gas, velocities, temperatures etc., some allowance for an extrapolation to alternate conditions is definitely in order. The conditions imposed in this study are best described as those most likely to maximize fission product release. Two of the most important variables not investigated in the present report are the influence of metal cladding and the difference in internal nuclear heating as opposed to external radiant heating. In addition a significant uncertainty exists in the understanding of diffusion through large masses such as might result from a scaled-up melt down in a reactor.

Further calculations have been made to determine the desired radial fuel distribution in the HFIR and in the forthcoming HFIR critical experiment. In the process the design of the core was changed to include a 1-cm-thick annular space of water between the two nearly equally thick fuel annuli, a metal-to-water ratio in the fuel annuli of 1.0 (0.050 in. thick plates and coolant channels ) was specified, and the active length of the core was increased from 18 to 20 in. Results of the calculations indicated that the largest ratio of maximum meat thickness to minimum meat thickness occurred in the inner fuel annulus and was equal to 3.6, while the maximum fuel concentration occurred in the outer fuel annulus and was equivalent to about 0.7 g of U-235/cm^3 of meat. The total U-235 loading for this core was 8.01 kg, which results in a core lifetime of about 14 days.

Results of the examinations of corrosion specimens exposed in the HRT are presented. Specimens examined included (1) core screen samples, (2) core specimen array No. 1, (3) blanket specimen array No. 2, (4) core solution line specimen arrays No. 103 and 103A, (5) blanket solution line specimen array No. 203. Complete information is still not available on all the specimens removed from the reactor, however, those data which have been accumulated are presented. These include corrosion rates, computed from specimen weight-changes, and results of chemical analyses of scales removed from the specimens or specimen holders. Also included in the report is a summary of the HRT operating schedule during exposure of the specimen and of the status of examinations for those specimens removed from the reactor prior to run 20.

A total of 104 thermal cycles between 250°F and 1350°F were imposed on a 3 1/2-in. and a 4-in. freeze flange to determine their susceptibility to thermal fatigue. The flange clamping arrangement was modified and various gaskets were used during the cycling in an effort to reduce the gas leakage problem.

Measurements of the interfacial tension between water and tributyl phosphate solutions were made for application to the analysis of Marengoni effect in solvent extraction. A 24 hr flame calcination run to product Th02 particles yielded 40% as product and 54% collected from the furnace walls and from a coarse particle trap. The elution rates of uranyl ion from Dowex 21K using sodium nitrate could be approximated by assuming apparent diffusion coefficients of 1.67 x 10^-7 and 1.18 x 10 ^-7 cm^2/sec, respectively for 960µ and 820µ resn while the corresponding apparent coefficients using sodium chloride were 1. 78 x 10^-7 and 1.27 x 1-^-7 cm^2/sec. The reacting surface of ThO2 Universal Match Co. pellets was determined as a function of fraction dissolved. The lead scews and companion nuts from both the multipurpose saw and dejacketing machine were coated with a baked on lubricant. In Zirflex decladding studies using 4.5 M NH4F - 0.5 M NH4NO3, the average dissolution rate of Zircaloy-2 was decreased only 10% when the overhead condensate was withdrawn and 1.0 M NH4OH was added to maintain the volume.

A cross section tape has been prepared containing data for elements of most interest for aqueous homogeneous reactor multigroup diffusion calculations involving combinations of 150, 200, 240, 260, and 280°C temperatures. This tape permits multigroup analysis of a reactor in which two or more regions are at different temperatures.