Design philosophy, status of component development, operational procedures, and limitations of each section of the Oak Ridge large-scale, high-temperature, thoria slurry facility.

This manual represents the recommendations of the Instrumentation and Controls Division committee on Electrical and Electronic Symbols and Drawing that have been issued to date. Section I consists of copies of the American Standards Association Graphical Symbols for Electrical Diagrams, with certain variations or additions that have been recommended by the Committee to clarify or more positively identify the device or element symbolized. Since publication of the present ASA standards, certain elements, such as the transistor, have come into common use. Committee and represent the symbols have been selected after considerable study by the Committee and represent the symbols that seem to be standard Reference Information series, Interim E--1.

From introduction: "This is the sixth of a series of quarterly reports which will cover the progress and results from the conceptual design, economic evaluations and research and development work performed by the General Electric Company as part of the Nuclear Superheat Project."

Report documenting research and developments made by the Health Physics Division of the Oak Ridge National Laboratory.

Review of methods by which the radial deposition mechanism was determined in experiments with simulated waste solutions are briefly reviewed.

Economic and hazards calculation of pot calcination of Purex and Thorex wastes.

The development of nuclear reactors and other sources of nuclear particles has provided the analyst with a new method which has been successfully applied to the determination of microgram and even submicrogram quantities of many elements. In this method, known as "radioactivation analysis," the element to be determined is "activated" through some type of nuclear reaction which produces a radioactive isotope of the element. Since the radioisotope produced decays with its own characteristic radiation and half-life, it is possible, through radiochemical measurements following radioactivation, to devise a method of analysis which is very specific for particular elements. Whenever necessary, the radioisotope is separated by chemical means and its radioactivity is then measured by some type of radiation counter.

Report documenting the ongoing research and developments of the Chemical Technology Division of the Oak Ridge National Laboratory.

From introduction: "this is the fifth of a series of quarterly reports which will cover the progress and results from the conceptual design, economic evaluations and research and development work performed by the General Electric Company as part of the Nuclear Superheat Project."

From introduction: "This is the seventh of a series of quarterly reports which will cover the progress and results from the conceptual design, economic evaluations and research and development work performed by the General Electric Company as part of the Nuclear Superheat Project."

Laboratory fabrication and testing of an inline densimeter.

Report containing ongoing projects and experiments undertaken by the Oak Ridge National Laboratory's Molten-Salt Reactor Program.

Test work was completed on development of a stripping method for the amine extraction (Amex) process which produces a concentrated uranyl nitrate solution for shipment to the refinery. This procedure offers potential cost savings by simplifying the overall mill-refinery flowsheet. The process involves treatment of the amine extract with calcium nitrate solution to convert the uranium in the solvent to a nitrate complex, stripping the uranium with water or dilute nitric acid, and recovery of nitrate from the solvent for recycle by contact with a lime slurry.

Report describing ongoing progress made at the Oak Ridge National Laboratory's Thermonuclear Division.

The performances of aqueous-homogeneous (AHBR), molten-salt (MSBR), liquid-bismuth (LBBR), gas cooled graphite-moderated (GGBR), and deuterium-moderated gas-cooled (DGBR) breeder reactors were evaluated in respect to fuel yield, fuel cycle costs, and development status. A net electrical plant capability of 1000 Mwe was selected, and the fuel and fertile streams were processed continuously on-site.

The performances of aqueous-homogeneous (AHBR), molten-salt (MSBR), liquid-bismuth (LBBR), gas-cooled graphite-moderated (GCBR), and deuterium-moderated gas-cooled (DGBR) breeder reactors were evaluated in respect to fuel yield, fuel cycle costs, and development status. A net electrical plant capability of 1000 Mwe was selected, and the fuel and fertile streams were processed continuously on-site.

This report describes the preprocessing stage to be added to the present ORACLE-Algol translator which will enable it to translate programs containing procedures. The Algol 60 procedure is an extremely flexible tool, and its full implementation presents a number of difficulties. Since it is undesirable to undertake major revisions of the existing parts of the translator and impossible to solve all of these difficulties in a processing stage, it was necessary to impose certain restrictions on the use of procedures. The result, however, retains the more basic features of the Algol 60 procedure concept. Most of the algorithms published in the Communications of the Association for Computing Machinery can be handled by the preprocessor with few minor or no changes.

Sanderson & Porter have carried out a series of studies over the last four years which indicate that the pebble-bed reactor way be an attractive way to obtain low-cost power. At the request of the Atomic Energy Commission, two design studies have been carried out on this concept at the Oak Ridge National Laboratory. The first of these a preliminary design of a 10-Mw(t) reactor experiment, the PRRE, was initiated September 10, and a report on the study was issued November 1960. The second phase of the work, a conceptual design study of a 330-Mw (e) central station, was initiated November 1, and is the subject of this report.

The objectives of this study have been to examine the problems of the pebble-bed reactor concept and to conceive a design of a facility for investigating the feasibility of this type of reactor. The design must provide for adequate leaktightness of the contaminated-gas system and adequate maintenance of contaminated components, the most vital feasibility questions of the concept.

Program written to perform polynomial least squares fits on the the IBM 7090 computer.

Experimental work concerned with the development of an inexpensive composite fuel plate with a high burnup potential for application in a 500°C sodium environment as Core B of the Enrico Fermi Fast Breeder Reactor.

Programming research in the construction of a translator to Oracle language from ALGOL.

Studies are being made on the recovery of thorium (and uranium) from granitic rock, since this source represents a very large potential thorium reserve for the nuclear power industry. In preliminary leaching studies on 16 granite samples (containing 8-95 ppm thorium and 1.5-16 ppm uranium), maximum recoveries of thorium and uranium ranged 30-85% and 15-65% respectively, and sulfuric acid consumption was high (30-120 lbs H2SO4 per ton of granite). A relatively high acidity was needed to obtain rapid and efficient dissolution of the soluble thorium fraction. The cost of treating granite was estimated at $3.50-5.20 per ton, variations within this range being dependent primarily on differences in acid consumption for different granites. Estimated costs per pound of thorium plus uranium recovered ranged $30-500.

A relationship is derived the mean square fluctuating current of a hot wire anemometer and the sic turbulent Reynolds stresses in the stream-coordinate system without employing the usual low turbulent intensity approximation. The relatively simple result is a consequence of assuming proportionality between the wire current reading and the perpendicular velocity component instead of the non-linear dependence required by King's law. The assumption is valid for instruments equipped with the proper linearizing circuitry. The stream-coordinate Reynolds' stresses are then related to the cylindrical polar Reynolds stresses.