From introduction: The study is based entirely on observations which have been made at a number of different installations at which boiling songs and vibrations were noted during heat transfer experiments.

In the Sulfex process, stainless steel cladding, generally 304-L, is removed from fuel elements by dissolution in boiling four to six molar sulfuric acid. When cladding removal is complete, the decladding solution is removed is removed to waste. The exposed fuel cores are rinsed and dissolved in nitric acid.

From foreword: This report is concerned with the investigation of an indirect cycle plant which was the subject of a joint study between Sargent & Lundy and NDA.

From foreword: This report investigates the economics and performance of alternate cycles for heavy water moderated power reactors.

The following report is the final safety analysis report for the Task 2 Radioisotope Powered Thermoelectric Generator prepared by The Martin Company. It presents analyses, tests and evaluation of the operational safety criteria for the generator.

Abstract: A unitized magnetic jack driven control-safety rod has been developed for the 45.5 thermal megawatt organic moderated reactor (Piqua).

This report describes progress made in the study of the feasibility of the concept, plant arrangement studies, and considerations pertaining to partial plant attendance. It is concluded that both the indirect and direct boiling cycles are feasible. The recommended reference design is the direct cycle, in a single capsule, with the turbine, generator and pumps on a single shaft.

Abstract: Presented here are working graphs of pressure, density, velocity, and temperature from the Los Alamos Scientific Laboratory calculations (IBM Problem M) of a spherically symmetric explosion in a homogeneous atmosphere.

The following document describes the usage and results of sending pulsed beams of electrically charged particles with electrically wide range of pulse lengths and pulse repetition rates.

The most important component required for the Astron experimental facility is a high energy, high current, pulsed electron accelerator. A thin cylindrical layer of high energy electrons trapped within an axially symmetric magnetic field is the key feature of the Astron thermonuclear device. The trapping magnetic field is constant in time. Therefore, it is not possible to inject electrons and trap the electrons in this field unless during the injection phase a part of the electron energy is absorbed by some friction process. This is accomplished by means of eddy currents generated on suitable passive circuits by the current of the injected electron bunch. This method has ben described elsewhere. However, in order to achieve an effective loss mechanism the current of the injected electron beam must be over one hundred amps. Such high current beams are difficult to handle except if the electron energy is high enough so that the electrostatic repulsive force is compensated to great extent by attractive magnetive forces. Hence the electron energy required is 5 Mev or higher. Other requirements on the electron layer yield the same result.

An approximate Boltzmann equation, known as the single relaxation model is studied here. This equation is linearized and the fundamental solution is considered. Following N. Grad, the solution, asymptotic in small values of the ratio of mean-free-path to distance from the origin, is sought. It can be shown that the fundamental solution itself gives the asymptotic description of the flow field past an object. This solution gives the asymptotic description when the distance from the origin is much greater than either the mean-free-path or the body size. This is true independently of the Knudsen number.

A prototype instrument has been designed and built which demonstrates an ultrasonic pulse echo technique of measuring metal thickness in the range .010 to .080 inches. Extension of the range of measurement on the thick side appears straightforward, however, transducer frequency response considerations may limit the extension of the method for very thin sections. The instrument is based upon the principle that sections, when driven by pulses of vibratory energy, resonate at frequencies dependent upon the thickness of the section.

"Dust and gas masks and respirators have been an effective method under certain environmental conditions to reduce the inhalation of toxic aerosols. Under many conditions, however, their efficacy has been seriously questioned. It is the purpose of this study to evaluation over-all respirator performance on fine aerosols and to develop equipment whereby a greater degree of respiratory protection may be assured with reliability for highly toxic atmospheres."

Quarterly report describing progress on a project to develop and evaluate high-temperature tungsten alloys. This report discusses properties for specific base alloys at room temperature and under high temperatures.

Individual Samarkand wildtype D. melanogaster males were permitted to choose between either two white-eyed or two red-eyed females or between a red-eyed and a white-eyed female. Observations of the flies were made over a period of about two hours and premating periods, intermating periods and the durations of copulations were recorded.

From foreword: This report presents the results of a study on the stability of phosphors under high energy beta radiation.

A reliable spline disposal system is necessary for full utilization of the Poison Spline Control System. The spline choppers were not reliable enough so a spline coiler was developed and designed to replace the choppers. A Development Test, IP-306-X (HW-63820), was issued authorizing on-pile testing of the spline coiler at X area. This report closes the Development Test and discusses the use of spline coilers.

The fabricability, elevated temperature strength, steam corrosion resistance, and hydrogen pickup of various binary, ternary, and quaternary alloys were studied experimentally.

At present, emphasis is being given the application of nondestructive testing to the inspection of nuclear fuel in conjunction with complete product specifications. The objective is to quantitatively specify fuel quality parameters, and to measure the entire fuel production against these specifications nondestructively. Under this concept the acceptability of a given fuel element becomes a well-defined factor readily determined by appropriate nondestructive tests.

Report discussing wavelengths and estimated intensities in electrodeless lamp and spark sources presented for 15121 lines of ThI, ThII, ThIII, and ThIV in the spectral range from 2000 to 11550 A. Also contains tables of previously published interferometric values.

Report discussing how solids subjected to non-uniform temperature change develop internal stresses determined by, (1) the temperature distribution within the solid, and (2) certain physical constants of the material. For two varieties of heating, the equations determining stress have been put in convenient form for practical use, and tables of certain temperature functions show how to determine stresses in a slab, in a cylinder, or in a sphere subjected to either of two modes of heating. The temperature-distribution tables independently provide a useful means for the ready estimation of temperature gradients.

Reports discussing bands of common gases that have been tabulated and remeasured wherever necessary from 2 to 16 microns to obtain an accuracy of about 0.03 cm-1 throughout the region and to provide good calibrating points at frequent intervals. Some 600 rotation-vibration lines are illustrated in 20 spectrograms and wavenumbers are listed in companion tables with considerable intercomparison with worthy data obtained in other laboratories. The absorption bands were remeasured or calibrated by using either a precisely graduated grating circle or standard atomic lines with the fringe system formed by a Fabry-Perot interferometer. Characteristic features of the individual bands are discussed briefly and references to other publications are given. The substances used for calibration include H2O, CO2, CO, HCl, HBr, NH3, C2H2, CH4, N2O, and polystyrene film.

Report containing information regarding He4 vapor pressure measurement as of 1958, the recent history of the vapor pressure temperature scale, and a series of tables containing these measurements.

It is the purpose of this report to explain the bands and uses of a digital computer program for the calculation of steady state steam-water pressure drop and critical flow in pipes. The program has been coded for the IBM 709 computer. While so attempt has been made to obtain improved models of two-phase flow, it is believed that the numerical integration technique used in the code will permit more accurate calculation where pressure drops are large compared to the upstream pressure. The technique should lend itself readily to any improved correlations which appear in the future.