From foreword: This report presents the preliminary design of an industrial gamma irradiator for the sterilization of medical supplies.

Quarterly progress report describing work related to a study of radiation physics problems involved in the design of high-level cesium-137 gamma sources. It outlines work completed and ongoing goals for the project.

"Abstract: An evaluation of a modulator flux sensitive playback head to be used with an analog magnetic recorder for nuclear pulse information storage was made. The modulator head was found unsultable. A pulse stretching unit was constructed which takes pulses from a standard linear pulse amplifier and provides an output signal suitable for driving a recording head."

The following document aims to analyze the dynamics of a pinch tube, including the reaction back on the energy source.

From introduction: This report sets forth the results of a study of a 100-mw dual cycle boiling water reactor, nuclear power plant.

From preface: This report is one of a series covering a design study of heavy water moderated power reactor plants with the objective of selection and recommendation of a conceptual design for providing optimum economics with slight fuel enrichment.

From introduction: This report is a summary of the lecture material in the training course held at Idaho Falls, Idaho, to familiarize members of radiological assistance teams with information helpful in the response to an unusual accident including release of radioactive materials to a populated environment.

Foreword: This is the eighth of a series of reports covering technical progress on the research and development program being performed in connection with the design of the Pathfinder Atomic Power Plant.

From introduction: This report details the progress of the Advanced Pressurized Water Reactor Study.

From introduction: The objectives of the study are to review the designs and costs of the 306 mw selected BWR and to determine the effect of refinements on plant performance and costs.

From summary and conclusions: This study has been made to determine the feasibility of installing reheat steam facilities in conjunction with the selected 306-mw boiling water nuclear power plant.

Abstract: "A definition of average conduction resistance for an ignitron is established, and a test bank for determining the value of this resistance is described. Data are reported on four typical ignitron types for several currents in the kiloampere range. Oscillograms are presented to illustrate the change of current with time for a conducting ignitron in a ringing circuit."

Abstract. An IBM-650 computer code for the detailed unfolding of [gamma]-ray spectra obtained from NaI scintillation counters has been developed. The procedure is set up to remove analyzer scale dependence and to largely remove energy dependences. Computer time is about 1 minute per [gamma]-ray.

Operating plant experiences in restoring to useful service failed equipment contaminated through exposures to radioactive processes is of international interest to the nuclear industry. In accordance with a request from the Hanford Operations Office of the United States Atomic Energy Commission this report of the various measures taken in rehabilitating for re-use expensive engineered equipment has been compiled by the General Electric Company. This report is a review and summary of the disposition of contaminated major processing equipment at Hanford Atomic Products Operation during 1958-1959 and a listing of 1) equipment buried, 2) equipment stored, to be buried or decontaminated, and 3) equipment decontaminated and returned to service.

One of the problems involved in the design of NPR is the method to be used for decontamination, Considerable effort has been made in both laboratories and pilot plants in developing and evaluating decontamination processes under ideal conditions. Promising processes must be tested under prototypical conditions of velocity, water quality, manner of make-up, type and degree of contamination, addition of decontaminating solutions, and so on.

This document reports the circumstances surrounding the failure of sheathed thermocouples during a test being conducted in the KAPL-120 Loop. The report is prepared to provide a record of these events and to acquaint those who use these thermocouples for testing of other applications with the difficulties that are sometimes encountered.

Thermal oxidation of graphite in flowing CO2 is being studied at 650 to 850 C, in a single-pass gas system at atmospheric pressure, by observing weight loss rates. The method is used to provide comparative data for candidate reactor graphites. The effects on oxidation rates of graphite purity, structure, coke type, graphitization temperatures and other manufacturing variables are determined. In addition, the effects of gas flow rates and graphite surface to volume ratios are observed.

Although the corrosion of resistance of Zircaloy--2 clad fuel elements in high temperature water is excellent, some concern has been expressed in regard to the resistance against fretting corrosion. Since this form of corrosion can proceed quite rapidly it could induce fuel element failure through penetration of the cladding. Fretting corrosion if it occurred, would take place either where the fuel element contacted the process tube or where portions of the fuel element contacted each other, e. g. wire-wrapping around a cluster of cylindrical fuel rods. This form of corrosion is defined as corrosion occurring at contact areas and as such, fretting of Zircaloy-2 could take place in many reactor concepts. This report details the results of testing performed to induce fretting corrosion of Zircaloy-2 and the direction of the future tests.

From Introduction: "This Monograph describes methods and apparatus used at the National Bureau of Standards in connection with several series of investigations of heats of combustion of aircraft fuels [4, 5, 6, 7]."

Technical report. From Abstract: "An anion exchange process was demonstrated for the recovery of plutonium from waste produced in the reduction of plutonium salts to the metal. Plutonium in a highly salted 6M nitric acid solution derived from the dissolution of slag and crucible waste was separated from impurities by absorbing the Pu (IV) nitrate complex on the anion exchange resin and subsequently eluting with nitric acid. A flowsheet for plant operation is presented."

Technical report. From Abstract: "Data are presented for the absorption of thorium and neptunium from synthetic waste concentrate of the "Purex" process by a miniature agitated bed of anion exchange resin. The behavior of neptunium indicated that efficient recovery should be obtained from Purex high activity waste concentrate by this technique. A method was developed for calculating absorption losses from agitation beds of resin. The predicted losses were in excellent agreement with experimental results."

Technical report. From Abstract: "Experiments were performed in the Process Development Pile (PDP) with a critical mockup of the Heavy Water Components Test Reactor (HWCTR) lattice. Reactivity measurements served to determine control rod worths, the temperature coefficient of the reactor at low temperatures, the dependence of keff on concentrations of U235 and poisons in the "driver" region of the reactor, and the changes in keff that occur in certain conceivable accidents in the HWCTR. Flux distribution measurements were made to determine over-all flux shapes, local flux variations around individual components, azimuthal flux variations due to asymmetrical combinations of control rods, and vertical flux variations obtainable through the use of control rods of partial length. Sufficiently detailed flux measurements were made to permit the calculation of neutron economy tables and to determine the neutron leakage from the reactor. Suitable adjustments in the input parameters made it possible to fit the experimental results with a two-group calculation."

Report issued by the Oak Ridge National Laboratory discussing quarterly progress made by the Homogeneous Reactor Program. Descriptions of progress and studies conducted are presented. This report includes tables, illustrations, and photographs.

From introduction: "The report is preliminary. At the time of writing, the status of the BORAX V project is that design of the reactor buildings and plant, done in collaboration with the architect-engineer with the architect-engineer has been completed and construction has just started; however, the mechanical design of the fuel and cores is still tentative."