Report describing parametric studies of eleven fast reactor fuel systems undertaken to determine the design and economic factors for producing electricity. The methods used for making the parametric studies are described, as well as the results of these studies. Appendices begin on page 103.

Report describing the Enrico Fermi Atomic Power Plant, its fast breeder reactor, and heat transport systems.

Data book to used as an aid in calculations on physical properties and flow characteristics of air.

From introduction: "Evaluation of the present economic and technological status of power reactors that are cooled and moderated by heavy water and fueled with natural uranium."

From introduction: "The contract covers final design of the SM-2 Nuclear Power (PWR) Steam Electric Station, described in the preliminary design report, APAE 40, Volumes I and II."

From abstract: "The study evaluates the utilization of superheat and moisture separation techniques in the SM-2 design to improve the steam plant reliability and thermal efficiency. Ease of packaging, steam plant transient response, and capital costs are also considered. The reference design used for comparison is the steam cycle employing saturated steam at 600 psia described in APAE No. 40, Volume II."

Report that describes the Oak Ridge National Laboratory Experimental Gas-Cooled Reactor, problems with the procurement and assembly of its components, and its economic feasibility.

Results of processing 47 metric tons of Brookhaven spent reactor fuel are summarized.

Report issued by the Oak Ridge National Laboratory discussing quarterly progress made by the Homogeneous Reactor Program. Descriptions of progress and studies conducted are presented. This report includes tables, illustrations, and photographs.

Graphs and tables summarizing detailed discharge data of the Big Lost River.

Review of previous work is presented in addition to the results of recent studies concerning loss of primary coolant when the system is cold and pressurized and the problem of supplying adequate cooling following the injection of light water.

This report describes the development of an ultrasonic instrument for resin level measurements in an ion exchange column.

Specifications including detail dimension, materials, fabrication steps, acceptance criteria, and final assembly steps for the swaged uranium dioxide, 19-rod cluster Plutonium Recycle Test Reactor fuel element.

Report documenting the Halogen Collector Test program, which was undertaken to provide "methods of removing trace quantities of radioactive iodine from an air stream" (p. 1). The report includes designs of the program and the test facility, test results, analysis of these results, and encountered problems. Appendices begin on page 38.

Chain reacting conditions for plutonium nitrate in water solution have been examined experimentally for a variety of sizes of spheres and cylinders.

Abstract: Development of welding processes for stainless steel fuel elements, previously initiated by Alco Products, was continued in Task 5. Three objectives were accomplished; (1) development of a suitable reference welding process, (2) evaluation by out-of-pile tests of the structural integrity of reference welded fuel elements, and (3) preparation of specifications and fabrication procedures for the reference welding process.

Abstract: The results of activity buildup studies in the SM-1 performed during Core I lifetime (June 3, 1957 to April 28, 1960) are reported. Data are presented on the extent, nature, and mechanism of the buildup of long-lived gamma emitting nuclides in the reactor primary system. Radiation levels after reactor shutdown are presented, as well as mathematical equations used to account for the observed activity levels. The data have shown that Co60 is the major contributor to radiation levels in the SM-1. Co60 activity arises from the cobalt in Haynes 25 alloy flux suppressors, and the cobalt impurity in stainless steel. After 35 months operation at an average power level of 55%, deposited Co60 activity accounted for approximately 83% of the total radiation level (mr/hr) contributed by the long-lived gamma emitting nuclides. The contribution of the primary coolant activity to the total radiation level is insignificant when compared to the contribution of the activity deposited on the walls of the system. The radiation level on the super-heater side of the steam generator was about 1400 mr/hr after 35 months of reactor operation. The percentages of Co60 activity in the coolant and in the deposits were not the same. This indicates …

Abstract: A zero power experiment on the SM-1 Core II included an element by element reactivity check of fuel elements and control rod absorber sections, and an estimate of burnable nuclear poison loading in stationary fuel elements. An approach to criticality was made by the inverse multiplication method, and critical rod bank position obtained as a function fuel loading up to full core loading. Minimum and maximum core reactivity measurements were obtained by selective loading of stationary fuel elements, and total excess K of the core was established. Power distribution measurements were taken in the regions of the core-reflector interface and the fuel-absorber interface in the control rod assemblies. The effectiveness of europium flux suppressors in the top of control rod fuel elements was determined, and power peaking was measured in stationary elements adjacent to control rod assembly water gaps. Survey measurements established the work of spiking clean, cold SM-1 cores with SM-2 elements and the work of water holes in the SM-1 Core. The reduced scope zero power experiment performed on SM-1A core I included an element by element uniformity check of stationary fuel elements, a core assembly test, comparison of Eu2O3 and B4C absorber sections, and development of …

Abstract: An element by element reactivity check for SM-1 Core II fuel elements and control rod absorber sections was performed and the burnable nuclear poison loading in the SM-1 Core II stationary fuel elements was established. An approach to criticality of the SM-1 Core II was performed by the inverse multiplication method and the critical rod bank position obtained as a function of fuel loading up to the full SM-1 Core II loading. Maximum and minimum core reactivity measurements were obtained by selective loading of stationary fuel elements and the total "excess K" for the core established. Power distribution measurements in the region of the core-reflector interface and the fuel-absorber interface in the control rod assemblies were performed. The effectiveness of europium flux suppressors in the top of control rod fuel elements and the power peaking in stationary elements adjacent to water gaps in control rod assemblies were measured. Survey measurements established the worth of spiking cold clean SM-1 cores with SM-2 elements, and of water holes in the SM-1 core which might be utilized as flux traps for materials irradiation.