Report documenting the dissection of a reactor called the Aircraft Reactor Test (ART). Includes the removal of the reactor from its test cell, component removal, and plans for a for a disassembly building facility.

A proposed modification to the experiment off-gas system for the EGCR-LITR Capsule Experiment is evaluated by comparing the atmospheric radiation doses to laboratory personnel that could result in the event of an experiment failure while utilizing the present off-gas system to those doses that would result if various modifications to the existing system were effected. The modifications considered include the addition of an iodine vapor adsorber and a krypton-xenon adsorber. The addition of an iodine vapor adsorber to the off-gas system, which presently includes an absolute filter, reduces the atmospheric dose to the thyroid from 510 mr to 1.4mr. The total body dose is also reduced from 2.2 to 1.3 mr. The total body dose can be further reduced to 0.7 mr if a large krypton-xenon adsorber is included. Basd upon these calculated atmospheric radiation doses it is concluded that the addition of an activated charcoal iodine vapor adsorber will reduce the atmospheric hazard to an acceptable level.

A short-term study was made to investigate the removal of radioiodine vapor from air-steam mixtures as could occur immediately following a nuclear incident in a pressurized water reactor. Activated charcoal traps, designed to simulate a small section of a commercial charcoal canister, were tested at gas velocities of 23.9 to 74.9 ft/min over the temperature range of 75 to 118°C. The iodine removal efficiency was found to range from 99.80 to 99.4% with an average of 99.9%. One test performed at a temperature of 105°C and with gas velocity of 290 ft/min indicated that the iodine removal efficiency was reduced to 99.54%. Activated charcoal exhibits a high efficiency for iodine vapor removal under these test conditions and appears suitable for application in the decontamination of air-steam mixtures.

A program has been coded for the ORACLE which will solve, using Monte Carlo technique, the transport problem for monodirectional, monoenergetic gamma radiation incident at an angle Θ, upon an infinite laminated slab of finite thickness. Each of the laminations (or regions) is itself an infinite, homogeneous slab of finite thickness. The code is designed to give estimates of energy deposition, energy flux, tissue dose rate, reflected and transmitted energy current, and the angular and energy distribution of the reflected and transmitted energy current. All the answers except for energy deposition and reflected and transmitted energy current are optional.

The thermal-neutron flux prevailing near the upper hole in the HRE-2 core wall was determined from measurements of the induced activity in a specimen cut from the edge of the hole. The specimen was removed following run 21 and was thus exposed to reactor neutrons during runs 13, 14, 16,17, 18. 19, 20, and 21. The neutron flux, calculated for an average core power level of 2 Mw, was 2.8 x10^13 neutrons/cm^2 sec. the core wall area from which the specimen was removed was located approximately 16-in. from the core center.

A stimulation study of the deign as of June 1960 of the gas-cooled ORR Loop No. 1 was made using the ORNL analog computer. The proposed method of temperature control is evaluated, and the dynamic behavior of the loop for accidents and component failures is presented in graphical form.

The ORNL analog computer was used to simulate four widely different experiment conditions in the small EGCR in-pile loops. Various control and safety systems were evaluated in each case. Curves are included which show the response to postulated accidents and component failures. The results indicate that one standard control and safety system will probably be adequate for a wide variety of test conditions.

This manual represents the recommendations of the Instrumentation and Controls Division committee on Electrical and Electronic Symbols and Drawing that have been issued to date, and supersedes the previously issued ORNL Electrical Symbols List and CF-58-12-141, Electrical and Electronic Drawing Standards for Wiring and Device Coding and Applications.

On 3/14/60 the Applied Physics Corporation was awarded a subcontract for the design and development of a high-temperature high-pressure spectrophotometer system based on the Cary Model 14pm Spectrophotometer insofar as possible, and consistent with our specifications, No. CTD-2, December 16, 1959.

This semiannual progress report and future reports will be published as two documents to permit a wider distribution of the unclassified material. The report numbers are assigned in sequence so that the two reports will fall together when filed by report number.

From Summary: "The major objective of the run was the investigation of fuel stability. The reactor operated for long periods at the design power of 5 Mw with none of the usual indications of instability while the system pressure was kept at 1250 psig. Run 21 ended on January 22, so that the reason for an abrupt change in the mixing rate of fuel between the core and blanket could be investigated and a reactor steam-system valve could be repaired."

Report issued by the Oak Ridge National Laboratory discussing quarterly progress made by the Homogeneous Reactor Program. Descriptions of progress and studies conducted are presented. This report includes tables, illustrations, and photographs.

Report issued by the Oak Ridge National Laboratory discussing quarterly progress made by the Homogeneous Reactor Program. It includes descriptions of progress and studies conducted during the report period, with tables, illustrations, and photographs.

A chemical flowsheet is proposed for recovery of strontium and rare earths from Purex wastes. The iron in the waste is first complexed with tartrate and the pH is adjusted with caustic. Strontium and rare earths are extracted by a solvent comprised of di(2-ethylhexyl)phosphoric--sodium di (2-ethylhexyl) phosphate--tributyl phosphate -- Amsco 125-82. and are stripped with nitric acid. Processing the strip product through additional solvent extraction cycles yields isolated, concentrated strontium and rare earth fractions.

In the Communications of the ACM of April, 1960, p. 240, there appeared two Algol algorithms for the computation of In, the modified Bessel function of the first kind. One of these algorithms uses a convergent series and the other an asymptotic series. Their author, Dorothea S. Clarke, did not give any information with regard to which algorithm is more appropriate in a given situation (a given situation meaning the computation of In (x) for a definite pair of numbers n and x). Such information is necessary, however, if the algorithms are to be useful, particularly since the asymptotic series is in many cases not valid.

In a gas-cooled reactor operating at very high power density the thickness of the reflector may be determine by the requirement that the steel pressure vessel be protected from an excessive dose of fast neutrons, rather than by the usual requirements of neutron economy and power distribution. It is important the the reflector not be made thicker than necessary, since an increase in pressure vessel diameter can result in a marked increase in cost, as well as a decrease in the permitted gas pressure level.

An estimate was made of the beam hole currents to be expected from both the radial and tangential beam holes in the present HFIR design. The angular fluxes required for these calculation were determined by an 18-group, S8 transport calculation (SNG reactor code). Both type beam holes produced thermal neutron currents of 7.5 x 10^10 neutrons/cm^2 sec. at a power level of 100 Mw. The nonthermal component of the beam current was 7.0 x 10^10 and 4.5 x 10^10 neutrons/cm^2 -sec for the radial and tangential holes, respectively.

Current status of the High Flux Isotope Reactor which is being planned for construction at Oak Ridge.

These specifications for the fuel assemblies for Core I of the Experimental Gas-Cooled Reactor (EGCR) have been developed for use in procuring the first core loading. A fuel assembly for EGCR consists of a cluster of seven cylindrical fuel elements spaced and supported within a graphite sleeve. Each fuel element consists of a stainless steel tube containing a column of hollow UO2 pellets and having a spacer brazed at the midsection to control the spacing between fuel elements in a cluster. A master specification for the fuel assembly, a supplementary specification for each of the components, and a specification on record keeping during manufacture are included.

A conductometric titration method described by Goldstein was adapted for use in a remote analytical facility. The results obtained by mean of experiments made prior to this adaptation indicated that methanol is the most satisfactory medium in which to determine excess sulfuric acid in uranyl sulfate solutions that stimulate Homogeneous Reactor type fuel. When methanol is used, the complexation of hydrolyzable ions with sodium fluoride, as described by Pepkowitz, Sabol, and Dustin, is not required.

Report regarding the nuclear ship "Savannah" and the consequences of nuclear activity that it would release into the surrounding area at its proposed startup site, Camden, New Jersey. Scenarios include activity being released into the atmosphere and hydrosphere, damage to equipment, and effects on a population.

A generalization of Wigner's simple model for the distribution of nuclear level spacings is studied. It is based on a stochastic process which reproduces the correct joing probability distribution of N enerfy levels for small spacings. The case N=3, which includes the effect of the correlation between adjacent spacings, is discussed in detail. The resulting distribution and the correlation coefficient are compared with experimental data. No definite conclusion can be drawn except to say that the effect of the correlations on the spacing distributions on the spacing distribution is very small.

The Model Q-1212C Pulser is a single frequency (60 pps) generator whose output waveform is characterized by a rise-time of less than 4 mµsec and, depending upon the method of termination, an exponential decay having a time constant of 300 or 600µsec. The waveform approximates that produced by a radiation detector. The waveform approximates that produced by a radiation detector. The maximum available output from the instrument is 10 volts, positive or negative polarity, and is continuously adjustable by means of step switches and a 10-turn potentiometer. The potentiometer has a linearity of 0.1%.

Equipoise-2, a two-dimensional, two-group neutron-diffusion code in R-Z geometry, has been programmed for the IBM-7090 computer. This code was designed to permit the running of large numbers of cases without requiring excessive machine time. Typical running times are of the order of one to three minutes per case for a 1000-point problems. The maximum number of mesh points that can be used is 1444.