The following report provides information on an aerosol generator fit to produce fine particles by a vaporization-condensation technique. Included is a diagram of the essential components of the generator.

Abstract: A definitive investigation of the boron-carbon equilibrium system is being made by X-ray diffraction, metallographic, and thermal analytical techniques. Alloys are being produced by sintering pressed powder aggregates with subsequent arc melting. Alloys have been made at two atomic percent intervals up to thirty atomic per cent carbon. In the future, higher carbon compositions are to be investigated. Techniques have been worked out for the metallographic preparation of the extremely hard and friable alloys.

Abstract: A definitive investigation of the boron-carbon equilibrium system is being made by X-ray diffraction, metallographic, and thermal analytical techniques. Additional baron-carbon alloys have been prepared by sintering and arc-melting compacts prepared from boron and high-purity graphite. Metallographic examinations of these alloys are in agreement with alloys previously preapred from lampblack. X-ray investigation of sintered compacts indicates that the solubility range of boron carbide extends almost to pure boron. Boron of various purities has been annealed for times up to four hours, but no structure other than beta-rhombohedral has been detected. Very high purity boron (10 ppm impurity) has been obtained for the study of allotropy and the equilibrium relationships at very dilute carbon contents.

Quarterly progress report describing work related to a study of radiation physics problems involved in the design of high-level cesium-137 gamma sources. It outlines work completed and ongoing goals for the project.

Quarterly progress report describing work related to a study of radiation physics problems involved in the design of high-level cesium-137 gamma sources. It outlines work completed and ongoing goals for the project.

This report summarizes investigations taken between October 1, 1959, to September 30, 1960 with the objectives of developing high-tungsten alloys which are readily fabricable into massive and complex shapes and which possess adequate strength for operation at temperatures up to 2000 F. Within this report, studies are divided into two main categories: alloy development and material fabrication techniques

Quarterly report describing progress on a project to develop and evaluate high-temperature tungsten alloys. This report discusses initial experiments to compare different alloy combinations.

Quarterly report describing progress on a project to develop and evaluate high-temperature tungsten alloys. This report discusses properties for specific base alloys at room temperature and under high temperatures.

Quarterly report describing progress on a project to develop and evaluate high-temperature tungsten alloys. This report discusses experimentation with fabrication to improve thermal stability of tested combinations by further alloying.

From introduction: "This study is concerned with the basic variables that affect the electrostatic classification of heterogeneous aerosols in the submicron range, especially below 0.1 micron. The variables of interest are particle size, concentration, composition, dielectric constant, shape, and initial charge as they relate to rate of charging and therefore to the point of deposition in the classifier."

Introduction: "This report is an expanded version of the regular monthly letter report and is prepared in this form with the intention of reviewing work on the subject program for Euratom technical personnel. Work performed during the month of September, which normally constitutes the entire letter report, has been condensed under one heading."

The following report describes a mass flow system that can measure homogeneous flow, slurries, highly corrosive fluids and multiphase fluids, with the addition of considering pressure drops, measuring external to the flow, ruggedness and reliability.

This is the second quarterly report that documents a system of mass flow that can record measurements of homogeneous flow, slurries, highly corrosive fluids and multiphase fluids, additionally considering pressure drops, measuring external to the flow, ruggedness and reliability.

This report is the third in a series of quarterly reports discussing the concept and progression of an improved method in nuclear measuring than the usage of the scintillation counter. This report indicates that in a chopped double beam system, commutation of the detector current permits selection of optimum response time and size of radioactive sources.

Abstract: "As part of a program entitled "Improved Zirconium Alloys" a brief summary of a present zirconium research at various organizations has been prepared. Information was obtained by telephone and personnel contact; and these discussions, along with the organization and personnel, are presented."

"Abstract: An evaluation of a modulator flux sensitive playback head to be used with an analog magnetic recorder for nuclear pulse information storage was made. The modulator head was found unsultable. A pulse stretching unit was constructed which takes pulses from a standard linear pulse amplifier and provides an output signal suitable for driving a recording head."

Abstract: "The accuracies which can be achieved in analog recording systems are for the most part tape limited. While reasonable variations in tape speed do not directly affect the accuracy, such variations result in improper tape tensioning, which in turn results in poor head-to-tape contact. The quality of the tape transport mechanism should be such that the error introduced by improper head- to tape contact is less than tape errors. Some additional equipment is necessary in setting up a tape recorder for a given experiment. The amplitude of the input pulse spectura to the recorder should be adjusted for optimum value and, if possible, the counting rate should be adjusted to obtain good tape utilization. An oscilloscope is probably adequate to satisfy both conditions."

From abstract: "This report summarizes the past year of study of fine, molded, multicrystalline graphites with particular reference to the interrelation among certain properties with the composition, fabricating techniques, and thermal treatments found to influence them."

The following report is the final technical report on a series of reports under contract AT(11-1)-515, titled "Niobium Phase Diagrams", covering the period from April 15, 1957 to April 16, 1960.

This is the summary report on the ARF Project C 127, entitled "Preliminary Studies Related to Radioactive Fallout", covering the period from April 1, 1959, to April 29, 1960.

Report covering progress regarding a study on radiation synthesis involving halogenated compounds. Experimental progress, results and discussion are included.

Report discussing progress from May, 1960 through July, 1960 on a study of radiation synthesis involving halogenated compounds. Experimental procedures and data are included.

Report discussing a study on neutron detection schemes and the effect of neutron scattering on neutron image formation quality.

A report which contains the summary of work carried out over a 2-1/2-year period on scavenging of radioactive particles which might be released by the reactor system of a nuclear-powered ship.