Results of a conceptual design study for a curium powered thermoelectric generator of minimum size and weight which is capable of sustaining hard impact is presented. The generator produces a minimum of 13 watts of d-c power at 3 volts, and weighs 6.2 pounds excluding shielding. (J.R.D.)

Abstract: This report describes a 300,000-kwe, sodium-cooled, graphite-moderated nuclear power plant based on existing technical information.

The purpose of this experiment is to study the quantitative adsorption characteristics of a carbon adsorber bed receiving a radioactive inert gas in a helium stream. An objective of the experiment is to measure the equilibrium transmission of the radio-active gas through a carbon adsorber in order to determine if radio-active decay of the adsorbed gas permits additional adsorption.

This report is about the Advantages of Glass Micro-balloons as Filler Material

Presented at session S-1 of the Tenth Annual International Conference on High-Energy Physics, Rochester, New York, August 25- September 1, 1960. The analysis of the latest experiments on p-p scattering at 210 Mev makes it probable that there is a unique set of phase shifts at this energy. Under reasonable assumptions about continuity of the phase shifts and the behavior of the higher partial waves, it is possible to pick a unique solution also at 310 and 95 Mev. This opens a new era in the analysis of nucleon-nucleon scattering, which should lead to a unique model for the scattering matrix up to 400 Mev. Theoretical attempts to calculate a "meson potential" from field theory have not been successful, and the semi-phenomenological potential models, although now in good qualitative agreement with experiment, are not quantitatively reliable. Instead of using these models as a basis for an energy-dependent parameterization of the scattering matrix, as was done by Breit and his collaborators, it is here argued that the Mandelstam representation offers a more reliable starting point. A formalism is developed which allows the one and two pion exchange interaction to be included exactly and gives a Lorentz-invariant description of the rest of …

Work was continued on the determination of size and distribution of dispersed phase droplets in a pulse column. The droplet behavior and dispersed phase hold-up in Yorkmesh packing was studied with an equilibrated system of methyl isobutyl ketone and water with the ketone phase dispersed. An investigation is being made of the recovery of copper and EDTA from rare-earth ion exchange wastes. The effect of vapor properties on entrainment from bubble cap trays is being investigated. The design, construction, and operation of forced convection loops for circulating liquid metals are reported. The corrosion of 430 stainless steel and 21/2% Cr-l% Mo steel by a liquid lead- bismuth eutectic is reported. The operation of a stainless-steel sodium-cooled liquid-metal condenser is described. The effect of ten additives, including V, Mg, Zr, and Ce in inhibiting the corrosion of stainless steel by lead-bismuth eutectic is being investigated. The current process for preparation of sodium ethyl sulfate is given. Single crystals of Zn, Sn, Pb, and AgCl were grown with a simple, low cost, Bridgman-type crystallizer. Tests were performed at 800 to 1000 deg C on Y, Nb, and Ta loops, circulating Th-Mg and U-Cr eutectics. Work on the development of electromagnetic pumps is …

Two IBM-704 codes have been written which are auxiliary to the Bevatron orbit code BOC. The first, BEFCYF, interpolates among tabulated values of the median-plane magnetic flux density of the Bevatron to produce an equivalent array of values in a form appropriate to BOC. The second, DBDT, produces azimuthal derivatives of the fields produced by BEFCYF. The internal operation of BEFCYF and DBDT is described, and instructions for their execution are given.

A listing is presented of documents, films, slides, and those items which were formally produced for utilization by the AEC concerning the SNAP project. (J.R.D.)

Separate abstracts were prepared on 25 sections of this report. A list of publications during the period is included. (C.H.)

Abstract: A definitive investigation of the boron-carbon equilibrium system is being made by X-ray diffraction, metallographic, and thermal analytical techniques. Alloys are being produced by sintering pressed powder aggregates with subsequent arc melting. Alloys have been made at two atomic percent intervals up to thirty atomic per cent carbon. In the future, higher carbon compositions are to be investigated. Techniques have been worked out for the metallographic preparation of the extremely hard and friable alloys.

Report discussing the "equilibrium uranium distribution between an aqueous nitric acid solution and a 30 per cent by volume solution of tributyl phosphate in a hydrocarbon diluent" (p. 2). This includes the necessary equations.

Production of Pu nitrate from separations plant during this month was below forecast. UO{sub 3} production, shipments met schedules; so did unfabricated Pu shipments. Purex plant was stopped to replace the final waste concentrator (F-11) (leak). Two Pu-U partition failures were attributed to foreign organic material in the nitric acid; the Pu product was kept within specifications by adding NaF and ANN to ion exchange feed stream. A Np recovery run was started in Redox, and dissolution was started of 12 special 2-ton test batches of normal U fuel elements, irradiated to provide information on Pu formation rates. The damaged B-2 E-metal dissolver was replaced with a conventional dissolver. Test of a new sieve plate cartridge in Recuplex H-1 extraction column was stopped. A new semi-continuous product concentrator-stripper was made to replace Recuplex batch concentrator. Conversion of Purex prototype anion exchange to a manufacturing unit is nearly complete. Design was completed on the new Redox E-metal dissolver. Process feed was introduced into RMC button line and 3 buttons made. Project proposal for NPF reprocessing was revised.

A revision of section 8 of TID-8516, Part I, is presented. The reactor concept which is presented is a change from the former design, a pressurized- pressure vessel-indirect cycle plant to a boiling-pressure tubedirect cycle plant. A description of the plant and a summary of characteristics for the 110- and 325- Mwe systems are given. (J.R.D.)

The reactor design which forms the base for the current economic status of D/sub 2/O-moderated reactors was estimated from developments in several reactor programs. However, since a heavy water-moderated reactor was not operated on natural U fuel at power reactor conditions, considerable improvement from this current status can be foreseen. A summary of improvements is presented concerning the concept which would result solely from operation of succeeding generation plants without a parallel development program, and improvements which would result from the successful completion of the development program as presented. One plant size was used in the evaluation of plant potential, with a 300 Mw/sub e/ nominal rating. The boiling D/sub 2/O-cooled, pressure tube direct cycle plant design was used. The current development program is outlined; this work includes several items leading to the long-range development of the concept. (auth)

An evaluation of 300- and 100-Mwe power plants was conducted using ground rules prescribed by the USAEC for this study. Costs corresponding to two average discharged fuel burnups are: 8.6 mills/kwh (8500 Mwd/ metric ton) and 8.8 mills/kwh (7500 Mwd/metric ton) for the 300-Mw plant. Costs for the 100 Mw plant are 14.7 mills/kwh for an average discharged fuel burnup of 6010 Mwd/metric ton. Estimates of future potential indicate that the 300 Mw/sub 3/ (8500 Mwd/metric ton) plant could produce power for 7.3 mills/kwh in a second generation, full scale plant of the same type. A further reduction to 6.4 mills/kwh should be possible as the result of the recommended ten-year development program. The current development program is adequate for providing the data needed to design and construct a prototype reactor. However, there is no natural U-fueled prototype and no prototype of the chosen reference design scheduled in the U.S. Current technology is sufficiently developed to initiate the design and construction of a pressure tube, boiling D/sub 2/Ocooled, natural UO/sub 2/- fueled reactor prototype plant in the immediate future. This plant would demonstrate the main features of a full scale plant and, in addition. would provide design data which could …

Data report including schedules for groceries, meats, produce and beer. These schedules include sales, profits, salaries and expenses.

The reason for initiating the compact drive study for the T7 tanker was to investigate control rod drive size, location, and removal space requirement factors and select the control rod drive mechanism which would allow optimization of the over-all size of the containment vessel. Approximately twelve mechanical/hydraulic control rod drive arrangements were considered during this study.

None

A compilation is presented of room temperature and 1200/sup o/F properties of a large number of alloys which might be considered for use in a sodium-cooled reactor. Specific consideration is given to the use of such materials as fuel cladding. The arbitrary basis for property comparison is type 304 stainless steel. The study was made of 10 classes of alloys. These alloys are alloy steels, ferritic stainless steels, austenitic stainless steels, iron and iron-aluminum alloys, precipitation-hardening stainless steels, austenitic superalloy, nickel-base alloys: cobaltbase alloys; copper-base alloys, arid refractory metals and alloys. (W.J.H.)

The adequacy of the Consolidated Edison Thorium Reactor (CETR) control rod drive line operation was evaluated and proven by the development program described in this report. This program also included evaluation of materials and fabrication processes.

The Consolidated Edison Thorium Reactor Control System has been designed to provide the operators with a reliable, safe and accurate means of controlling the plant. Manual and automatic positioning of control rods can be accomplished. The automatic plant controller has been designed to meet the design criteria under the representative CETR demanded load changes. Adaptability has been built into the plant controller by providing variable controller adjustments for variations in reactor characteristics. Extensive analog studies have been made of the various plant parameters and their effect on control was carefully evaluated. These analog studies have shown that the control system will perform in a satisfactory manner under the most adverse plant conditions.

Tests were conducted to assure proper operation of the control-rod mechanisms of the Shippingport Pressurized Water Reactor under normal operating conditions. (C.J.G.)

Preliminary studies have, in general, indicated the need for modifications and improvements to the reactor last ditch coolants systems in order to provide adequate safety of operation at power levels programmed for the future. These studies have indicated the need for improved reliability as well as increased capacity for the last ditch coolant systems. A design study is being prepared by Reactor Modification Design to define the scope of the modifications required to provide adequate last ditch systems for the older areas. Adequate last ditch cooling will be provided for the 100-K Areas under Project CGI-844 which is currently in progress. The purpose of this document is to set forth the operating conditions and objectives on which the study will be based.

A study has been performed to determine the corrosion product and water impurity activities in the CETR Chemical Process System. A simplified mathematical model is used to represent the physical situation; however, the magnitude of the activities, taken at the end of the core life to represent the most conservative case, is considered sufficiently accurate for engineering calculations.