Because of the excessive vertical fragility and high replacement costs of mice-window G-M tubes used in vertical and horizontal lead-pig shelf counters, it was requested that a simple system of conversions to reliable scintillation detection be accomplished.

Whenever fissile materials are handled in significant quantities such as in fuel element fabrication, separation processes, or in exponential and/or critical experiments a potential criticality hazard exists. The usual procedure which is followed by those persons conducting critical mass experiments is to either place the potential reactor in a heavily shielded cell or to conduct the experiments remotely in which case distance provides a measure of safety in the event of an unscheduled radiation outburst. In considering potential critically incidents, especially for the personnel not specifically engaged in critical mass studies, it is very likely that at the time of the incident neither the conditions of shielding nor distance will prevail for the personnel involved.

A program has been prepared for the 709 computer which will determine extrapolation length from horizontal traverses measurements taken in an exponential pile. The flux across the pile is assured to fit a cosine function of the form y = A cos B (X-C)

The chromium-nickel-manganese alloys are a group of austenitic stainless steels which were developed during the Korean War to conserve nickel. These alloys are very similar to their corresponding 300 Series grades in mechanical, physical and corrosion properties. A portion of the nickel in the 300 Series grades has been replaced by approximately 2% manganese for each percent of nickel replaced. Two compositions, AISI 201 and AISI 202, are recognized as standard grades. Two other compositions, AISI 204 and AISI 204-L, have been produced in limited quantities to replace AISI 304 and AISI 304-L. Experience with the 200 Series steels indication they are every bit as good as the grades for which they were once alternates. In some shapes, such as rod and sheet, the cost per pound is considerably lower than the corresponding 300 Series grades.