Photographs and working drawings are presented for a small (approximately 4.25 X 7 X 9 inch) 300Kv pulse transformer having double-conical secondaries each with a corona ring at its greatest diameter. The pulser circuit is shown but no text is included.

Since the 25 content of the uranium to be used in a MTA multiplying lattice is quite uncertain at present, it is necessary to assume various degrees of depletion in order to estimate the multiplication constant K-o and the production of 49 in an infinite uranium-graphite lattice

The proper roof thickness to correspond with a given side wall thickness has been estimated fro experience with the 184 feet cyclotron, which has indicated that a roof of about 1 1/2 feet should accompany a wall of 5 feet, and a roof of 4 feet should accompany a wall of 15 feet. For the roof area involved, this should bring about the condition that down-scattered neutrons in the working areas are but a small fraction of the neutrons coming through the side walls.

Comparative studies of a series of halogenated solvents, as carriers for TTA in the chelate process for plutonium extraction, indicate that ortho-dichlorobenzene most nearly satisfies the requirements that are set forth. A complete process design is presented for use with this solvent, and flow data and equipment capacities are given for dissolver solution and for uranium-free fission product solution as alternate feeds to the process.

Quarterly progress report on various research projects conducted at the University of California Radiation Laboratory

The complexing of lanthanum by various anions and weak acids was investigated by observing the light absorption of the complex formed with thenoyltrifluoracetone (TTA). This species showed the properties needed for a satisfactory specgtrophotometric method of analysis.

The use of diffusion theory to attempt to reproduce the chemical data of Hicks and Stevenson for the spatial distribution of neutrons in a solid block of uranium that is bombarded by 190 Mev neutrons is described.

To calibrate a pulse height discriminator, the amplitude of the calibrating pulse must be known. If the amplitude is known, the discriminator dial may be calibrated in terms of the input signal required to just trip it. This is the purpose for which the Discriminator Calibrator was designed. It produces pulses of variable but known amplitude with a rep. rate variable from 3 pps to 4000 pps. The main use of this unit at the UCRL is in conjunction with scalers at fixed counting locations.

The effect of air, nitrogen, helium, argon, and a mixture of twenty volume percent of hydrogen in argon on the wetting of a stainless steel (Type 446), a two percent chromium-one half percent molybdenum type steel, and a plain carbon type steel by liquid bismuth was investigated

Energy values are generally accurate to 5%, except in the low energy region and except for He(3) and He(4) for which a non-relativistic conversion was made.

The uptake of carbon dioxide by plant roots preparations has been demonstrated by various authors. In addition to confirming the fact of fixation, I have investigated the effect of a number of factors involved and the compounds in which the absorbed carbon appears, using carbon-14.

Calculations indicative of the power loss for 75 in.radius gap splitters are given.

The fission and spallation reactions caused in uranium by bombardment with high energy protons (340 to 350 Mev) were investigated. The reaction products were separated from the target by chemical processes and identified by their radioactive properties. The relative yields of the observed fission products were measured, and the results plotted as a function of mass number. Several of the spallation products were identified and their yields estimated.

The mathematics of the approximation is developed for the case of a H2O-cooled, graphite-moderated matrix

The acceleration of charged particles in the Berkeley 60-inch and 184-inch cyclotrons has made it possible to study a large variety of nuclear reactions. The characterization of the products from these reactions is done by chemical separations of elemental fractions and subsequent identification of the nuclides formed.

The state of polonium in aqueous solutions was investigated by means of ion exchange equilibrium studies. The distribution of the polonium between the solid and liquid phases was determined for solutions of various compositions using both a cation and an anion exchanges. These studies show that in the absence of a complexing agent polonium is hydrolyzed to such a degree that it forms monovalent cations and anions whose charge was not investigated in this study.

A study was conducted on the elution behavior of curium (III), americium (III), plutonium (III), actinium (III), plutonium (IV), neptunium (IV), uranium (IV), thorium (IV), neptunium (V), plutonium (VI), uranium (VI), lanthanum (III), cerium (III), europium (III), ytterbium (III), ytterium (III), strontium (II), barium (II), radium (II), cesium (I) with 3.2 M, 6.2 M, and 12.2 M HCI solutions from Dower-50 cation exchange resin columns. These elutions show that in high concentrations of hydrochloric acid the actinides form complex ions with chloride ion to a much greater extent than the lanthanides. In order to explain these results, a partial covalent character may be ascribed to the bonding in the transuranium complex ions. It is shown that a reasonable structure for such covalent bonding involves hybridization of the 5g-ortibals in the actinide elements.

Calculations are developed which indicate the Pu production is an infinite lattice

Describes the investigation of a particular method of extracting ions from an arc. Experimental results of a low extraction voltage ion source are given in some detail.

Quarterly report which includes brief summaries of research studies related to technology materials and accelerator testing

Ilford type C-2 nuclear research emulsions were exposed in the x-ray beam from the Berkeley synchrotron at four synchrotron energies. The relative yields of the photo-produced nuclear stars were determined as a function of synchrotron energy and prong number.

Quarterly summary report of studies conducted through the Radiation Laboratory, University of California. Some results reported in the report may be of a preliminary or incomplete nature.

The basic scheme under consideration in this research on stability of closed-loop of the Mark I machine is one in which a voltage proportional to the magnitude of the rf fields in the cavity acts to control rectifier voltage output. It is recognized that such is not the only scheme for maximization of output which may be conceived, but only what seems to be a logical and direct way of attaining such an objective.

Secondary charge effects from a 10 kilovolt proton beam and their effect upon beam current measurement are investigated. A collector is designed for beam current metering of a 60 kilovolt proton beam by means of charge measurement and energy measurement.