Technical report investigating the corrosion resistance of thorium and thorium alloys containing from 2 to 6% chromium, columbinium (niobium), titanium, zirconium and titanium-zirconium in distilled water at 95ºC. The true effects of the various alloy additions could not be determined because of the more marked effect of cold working. [From Abstract]

From abstract: "The rate of hydrolysis of TBP and the effect of the hydrolysis products in the Purex Process have been studied. Hydrolytic conditions may be encountered in the process which would lead to formation of dibutyl phosphoric acid, causing significant losses of tetravalent plutonium in stripping. This situation may be easily alleviated by reducing and stripping the plutonium in the trivalent state."

Technical report detailing kinetic equations that have been developed for a boiling-type reactor and inherent reactor stability studies that have been made on the basis of these equations. Presents features of the proposed reactor, comparisons of circulating types, investigations of bubble-rise velocities, effects of transient conditions of vapor mass in steam chest, and bubble time delay functions yield favorable results. [From Abstract]

Technical report containing a comprehensive study of the physical metallurgy of thorium and some of its alloys containing additions of Be, Si, Zr, Ti, Al, Nb, Cr, Mn, and Ce. Melting range, fabricating characteristics, and tensile properties were studied. [From Abstract]

From abstract: "Neutron-irradiated uranium was electromagnetically separated to provide enrichment of the isotope of mass 236. The final isotopic abundance of U 236 was determined to be 95% in 1800 milligrams of uranium. Useful by-products of the program were 22 grams of 25% U 236 and 1100 grams of 99.7% U 235. These enriched materials have been made available for use on Atomic Energy Commission projects. Possible application of this separation process to recovery of the fuel from the MTR reactor is described."

From abstract: "Neutron-irradiated uranium was electromagnetically separated to provide enrichment of the isotope of mass 236. The final isotopic abundance of U 236 was determined to be 95% in 1800 milligrams of uranium. Useful by-products of the program were 22 grams of 25% U 236 and 1100 grams of 99.7% U 235. These enriched materials have been made available for use on Atomic Energy Commission projects. Possible application of this separation process to recovery of the fuel from the MTR reactor is described."

From abstract: "The probability for a fission neutron to escape fast leakage from bare, hydrogen moderated reactors is calculated by a method utilizing only the microscopic cross section of the materials. These results can be employed to determine the effectiveness of other substances in preventing fast neutron leakage. These calculations are carried out for aluminum and iron."

Air filter and rainwater collections of atmospheric fall-out were made at Atlanta, Georgia; Urbana, Illinois; Topeka, Kansas; Fort Worth, Texas; and Nashville, Tennessee. Collections reflect the effects of the radioactive cloud from the Nevada tests.

Technical report describing work on two special projects: (1) the Oak Ridge Computer; and (2) numerical integration of differential equations; multipoint boundary problems. The reports also describes work on thirty special problems.

Technical report outlining the building status, crystal physics, solid state reactions, radiation metallurgy, engineering properties, and liquid fuels activities of the Physics of Solids Institute in period ending April 30, 1951. [From Introduction and Summary]

Technical report outlining the reconstitution of the Homogeneous Reactor Experiment Project (HRE) as the Homogeneous Reactor Project. Report covers the need for a broader developmental program to establish the feasibility of obtaining the potential advantages of homogeneous reactors for the production of fissionable materials and power. Details the ultimate objective of the ORNL program to provide the technical information required to determine the feasibility of a full scale plutonium power producing homogeneous reactor. [From Summary]

Technical report covering experiments happening on the Analytical Chemistry Division's sites at the Oak Ridge National Laboratory. Includes information on ionic analyses, radio-chemical analyses, spectrochemical analyses, service analyses, inorganic preparations, analytical chemical control of homogeneous reactor solution, optical and electron microscopy, and service analyses for the period ending March 26, 1951. [From Abstract]

This quarterly progress report discusses topics of research and experimentation at the Oak Ridge National Laboratory, including inorganic chemistry, nuclear chemistry, radio-organic chemistry, chemistry of separations processes, chemical physics, radiation chemistry, chemistry of the solid state, instrumentation, reactor chemistry.

Technical report containing the general arrangement of the Low Intensity Training Reactor and outcomes of experiments that have been performed in the reactor to measure the rate of fission product heat dissipation from the fuel pieces after loss of water. [From Summary, Introduction]

Technical report describing a rapid and quantitative radiochemical method for the analysis of neptunium (237). This method is based on the extraction of neptunium (IV) with thenoyl-trifluoracetone in xylene. Neptunium (237) is separated free from other alpha emitters and from non-radioactive interferences, and the method may be readily adapted to remote control. [From Abstract]

Technical report outlining the investigation of corrosion on MTR type fuel elements for the Shielding Reactor in filtered water. Report includes two basic types of protection: element pretreatment by either anodizing or alodizing, and solution control using nitric acid to maintain a pH of 5.5 to 6.5 or the addition of 60 ppm sodium chromate as an inhibitor. [From Abstract]

Technical report covering classified work of the Critical Experiments Program in the Physics Division for the period December 20, 1950 to March 20, 1951. Report outlines investigations of properties of critical assemblies composed of uranium and various reflectors and moderators, preliminary measurements of the effective energy for fission in the assembly. [From Introduction and Summary]

Report issued by the Oak Ridge National Laboratory discussing revisions to previously issued conversion coefficient tables. The revised tables are presented. This report includes tables, and graphs.

Technical report presenting a consideration of the characteristics of fused salt-ThF4 solutions suitable for use in homogeneous reactors. Presented in tandem with a brief survey of the literature pertaining to such solutions and a summary of the experimental work accomplished. [From Abstract]

Technical report covering the metallurgy of thorium and on fabrication techniques. Report investigates the stability and corrosion resistance of thorium exposed to eutectic NaK, extrusion as a means of fabrication of thorium tubes or rods, and corrosion of large single metal crystals by liquid metals. [From Summary]

Report issued by the Oak Ridge National Laboratory discussing aqueous homogeneous reactors used in central-station power. As stated in the introduction, "it contains an evaluation of the potentiality of producing power only, as exhibited by aqueous homogeneous systems" (p. 6). This report includes tables, and illustrations.

Technical report covering the Homogeneous Reactor Experiment (HRE) reactor physics and engineering, out-of-pile corrosion, in-pile studies, recombination of hydrogen and oxygen, HRE chemical studies, experimental programs for the HRE, and long-range studies. [From Summary]

Quarterly technical report including reports on chemistry of source, fissionable, and structural elements, nuclear chemistry, radio-organic chemistry, chemistry of separations processes, chemical physics, radiation chemistry, and instrumentation. [From Abstract]

Technical report outlining the fabrication of twenty-five fuel assemblies and three shim-safety rod fuel sections for use in the Materials Resting Reactor Mock-Up Critical Experiments. Results show that two of the assemblies exceeded tolerance in a few of the key dimensions, but were considered acceptable and as a consequence, production was carried out with no rejects. [From Abstract]