From Introduction: "Water injection at the compressor inlet has been successfully used to increase the thrust of turbojet engines. References 1 and 2 indicate that the sea-level static thrust of a centrifugal-flow-type turbojet engine may be increased about 25 percent by use of liquid injection. Reference 3 indicates that greater thrust augmentation is possible at a compressor pressure ratio of 11 than of 4."

Report presenting an experimental investigation to determine the vibration characteristics of loosely mounted turbine blades during service operation of a turbojet engine. High-temperature strain gages were used to measure turbine-blade vibrations. Results regarding oscillograph records, critical speeds and frequencies, vibratory-stress levels, and effect of tightening the blade mount are provided.

Report presenting the effects of fuel properties and change in simulated engine operating conditions on carbon deposition in an annular turbojet combustor. The fuel properties examined included specific gravity, volumetric average boiling temperature, hydrocarbon type, and hydrogen-carbon weight ratio. The fuels included hydrocarbons of the paraffinic, olefinic, and aromatic types as well as fuel mixtures.

Experimental study to determine the vibrational modes of several hollow turbine blades and a solid turbine blade of similar aerodynamic design. Results regarding the significance of nodal patterns, vibrational modes of six blade types, and the probability of excitation in some of the blades are provided.

Report presenting 1/12-size model of a streamline fuselage modified by patterns of air jets or strips on the fuselage bottom. The effects of spacing of jets, length of jet rows, and direction of jets were determined for a simulated chine configuration. Data are presented on resistance, trim, effective hydrodynamic lift, and spray.

"As part of the performance investigation of compressors for the J33 turbojet engine, the A-21 model and the A-23 model with a 17- and a 34-blade impeller were operated with water injection at their respective design equivalent speeds of 11,500 and 11,750 rpm. Inlet conditions of pressure of 14 inches of mercury absolute and of ambient temperature correspond to those of the investigation of these models without water injection. The water-air ratio by weight ranged from 0.05 to 0.06. By the use of water injection, the peak pressure ratio of the A-21 compressor and the A-23 compressor with a 34-blade impeller increased approximately 0.38, whereas that of the A-23 compressor with a 17-blade impeller increased only 0.14" (p. 1).

"Studies have been made by the NACA wing-flow method of the use of fuselage static orifices between the wing and tail of a swept-wing airplane for possible application to service airspeed installations. The tests were made at zero angle of attack. The results indicate that, although the maximum errors are large, these locations are usable from the consideration that the local Mach numbers at the locations studied are sensitive to variation of the true Mach number within the test Mach number range of 0.7 to 1.2" (p. 1).