Report presenting an altitude-chamber investigation to determine the altitude performance characteristics of the British Rolls-Royce Nene II turbojet engine with a standard 18.75-inch-diameter jet nozzle. Results regarding the simulated flight performance and generalized performance across other altitude and pressure characteristics are provided.

Report presenting a semiempirical method of estimating the forces on airfoil at near sonic speeds and in the presence of detached shock waves. The calculated values were found to be in good agreement with wind-tunnel testing of the forces on sharp-nose airfoils and two-dimensional wings.

Report presenting an investigation to determine the longitudinal stability characteristics of a complete model equipped with a variable-sweep wing at four different angles of sweepback. The primary objective was to study various wing modifications and an external-flap arrangement designed to minimize the shift in neutral point accompanying the change in sweep angle.

Report presenting an investigation in the two-dimensional low-turbulence tunnel of the NACA 65,3-418 airfoil section with a 25-percent-airfoil-chord plain flap and a suction slot on the flap. The primary purpose of the investigation is to determine the effect of the type of boundary-layer control on the section lift-drag ratio.

Memorandum presenting an investigation of the effects of stator cone angle and tip leakage on turbine performance. A single-stage turbine with 40-percent reaction was operated with two stators and two stationary shrouds. The turbine was operated at an entrance temperature of 660 degrees R with total-pressure ratios from 1.25 to 3.70 and equivalent mean blade speeds from 166 to 655 feet per second.

"A heat-transfer investigation was conducted with air flowing through an electrically heated silicon carbide tube with a rounded entrance, an inside diameter of 3/4 inch, and an effective heat-transfer length of 12 inches over a range of Reynolds numbers up to 300,000 and a range of average inside-tube-wall temperature up to 2500 R. The highest corresponding local outside-tube-wall temperature was 3010 R. Correlation of the heat-transfer data using the conventional Nueselt relation wherein physical properties of the fluid were evaluated at average bulk temperature resulted in a separation of data with tube-wall-temperature level" (p. 1).

A heat-transfer investigation was conducted with air flowing through an electrically heated silicon carbide tube with a rounded entrance, an inside diameter of 3/4 inch, and effective heat-transfer length of 12 inches over a range of Reynolds numbers up to 300,000 and a range of average inside-tube-wall temperatures up to 2500 R. The highest corresponding local outside-tube-wall temperature was 3010 R.

"An investigation was made of the first-stage turbine of a Mark 25 torpedo power plant to determine the performance of the unity with two nozzle configurations and a special rotor having 0.45-inch blades instead of the standard length of 0.40 inch. Both nozzles had smaller passages than the nozzles of similar shape that were previously investigated. The performance of the nozzle-blade combinations is evaluated in terms of brake, rotor, and blade efficiency as functions of blade-jet speed ratio for three pressure ratios" (p. 1).

"Measurements were made, in dives to transonic speeds, of the static-pressure position error at a distance of one chord ahead of the McDonnell XF-88 airplane. The airplane incorporates a wing which is swept back 35 deg along the 0.22 chord line and utilizes a 65-series airfoil with a 9-percent-thick section perpendicular to the 0.25-chord line. The section in the stream direction is approximately 8-percent thick. Data up to a Mach number of about 0.97 were obtained within an airplane normal-force-coefficient range from about 0.05 to about 0.68" (p. 1).