"An empirical equation has been developed that gives the approximate amount of ovalization for tubes under bending loads. Tests were made on tubes in the d/t range from 6 to 14, the latter d/t ratio being in the normal landing gear range. Within the range of the series of tests conducted, the increase in ovalization due to a compression load in combination with a bending load was very small" (p. 1).

Report presenting testing of fifty-eight lightened and five unlightened aluminum-alloy channels as simply supported beams in pure or simple bending produced by loads parallel to the plane of symmetry, and fifty-three lightened and four unlightened aluminum-alloy channels with loads parallel to the back. Four types of testing occurred with various types of support and loading.

An investigation was conducted to determine the tensile strength of round-head (AN43C), flat-head(AN442), and brazier-head (AN4556) aluminum-alloy rivets because of the scarcity of information on the tensile strength of rivets. The results of the investigation are presented as curves that show the variation of the ratio of the tensile strength of the rivet to the tensile strength of the rivet crank with the ratio of the sheet thickness to the rivet diameter for the different types of rivet.