Report discusses an investigation into the relation between the effects of cylinder-head temperature and inlet-mixture temperature on the knock limits of fuels. The tests were run at a constant fuel-air ratio and the decrease in cylinder-head temperature required to offset the effect of increasing the inlet-mixture temperature on knock-limited power was determined. The apparatus and testing procedure are described and the effect of changes in cylinder-head temperature on the knock limit of any fuel are plotted.

Report discusses the problem of large airplanes spinning and the fact that they should not be intentionally spun because they are not designed for the loads and speeds that may be encountered in spin and recovery. Stall and spin characteristics for large airplanes are described. Recommended piloting procedures in case of a large airplane spinning event are also provided.

From Summary: "Local-instability tests of 24S-T aluminum-alloy formed Z- and channel-section columns were made in order to determine a length of test specimen that would avoid the increased strength associated with short lengths and also permit the occurrence of a convenient buckling pattern. The effect of column length on the critical compressive stress, on the average stress at maximum load, and on the number of half-waves of the buckling pattern is shown."